GE / IP FANUC Series 90/30 In Stock
IC695PSA140
RX3i PSA140 Power Supply
SKU 2177164 UPC 0471683066025
All product names, trademarks, brands and logos used on this site are the property of their respective owners. PDF Supply is not an authorized distributor, reseller or representative of the products featured on this website. The depiction, description or sale of products featuring these names, trademarks, brands and logos is for identification purposes only and is not intended to in indicate any affiliation with or authorization by any rights holder.
PDF Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with PDF Supply's 1-year, 2-year, or 3-year warranty.
Other Available Revisions for the IC695PSA140 IC695PSA140AIC695PSA140BIC695PSA140CIC695PSA140DIC695PSA140EIC695PSA140FIC695PSA140-LT
Common misspellings:
- 1C695PSA140
- IC695PSAl40
- IC695PSA1A0
- IC695PSA14o
- IC695PSA140
Technical Specifications for IC695PSA140
| Manufacturer | GE Fanuc |
|---|---|
| Series | RX3i PACSystems |
| Part Number | IC695PSA140 |
| Product Type | Power Supply Module |
| Nominal Rated Voltage | 120/240V AC or 125V DC |
| Input Power | 70 Watts |
| Output Power | 40 Watts |
| Output Voltage | 24V DC, 5.1V DC, 3.3V DC |
| Input to Backplane Isolation | 250V AC Continuous |
| Current per Terminal | 6 Amps |
Product Description
The IC695PSA140 is a Multi-Purpose, 120/240 volt AC or 125 volt DC, 40 Watt Power Supply from the GE Fanuc RX3i Series. See specifications for this unit on IC695PSA140's website page.
Technical Specifications
| Nominal Rated Voltage: | 120/240 VAC or 125 VDC |
| Input Voltage Range: | 85 to 264 VAC or 100 to 300 VDC |
| Input Power: | 70 W with VDC |
| Load Capacity: | 40 Watts |
| Module Type: | Universal Base Power Supply |
| Backplane Support: | Universal Backplane Only |
The IC695PSA140 Power Supply Module is a DC power supply module that belongs to the GE Fanuc RX3i PACSystems series of products. It is a multipurpose power supply that comes with an output power of 40 Watts. The recommended voltage range is 85 to 264 Volts AC or 100 to 300 Volts DC. The IC695PSA140 Power Supply Module occupies 2 backplane slots. It has 4 LEDs to indicate power, P/S fault, over-temperature, and overload situations. There is an on/off switch behind the door on the front of the power supply to control the operation of the outputs. This module has wiring terminals for power, ground, and MOV connections. The terminals of the module can each accept one wire 14 to 22 AWG gauge.
The IC695PSA140 Power Supply can provide 3 output voltages which are 5.1 Volts DC output, 24 Volts DC relay output, and 3.3 Volts DC output. The nominal rated voltage of the module is 120/240 Volts AC or 125 Volts DC. It is rated at 150 millivolts of ripple and noise for all outputs. If the power source is interrupted, this power supply maintains the output for 20 milliseconds. It accepts up to 4 daisy-chained power supplies at a time. If an internal fault occurs in the IC695PSA140 power supply, the CPU can detect the error through the fault code. The universal backplane accepts up to 4 power supplies. Its 5.1 Volts DC output has 7 Amps of electronic current limit and its 3.3 Volts DC output has 10 Amps of current limit for providing overcurrent protection. This module can be used in redundancy and load-sharing applications.
Technical Information
Specifications:
|
Nominal Rated Voltage Input Voltage Range AC DC |
120/240 VAC or 125 VDC
85 to 264 VAC 100 to 300 VDC |
|
Input Power (Maximum with Full Load) |
70 Watts maximum |
|
Inrush Current |
4 Amps, 250 milliseconds maximum * |
|
Output Power |
40 Watts maximum total 5.1 VDC = 30 Watts maximum 3.3 VDC = 30 Watts maximum The maximum total output power available depends on the surrounding air temperature, as shown. |
|
Output Voltage |
24 VDC: 19.2 VDC to 28.8 VDC, 5.1 VDC: 5.0 VDC to 5.2 VDC (5.1 VDC nominal), 3.3 VDC: 3.1 VDC to 3.5 VDC (3.3 VDC nominal) |
|
Output Current |
24 VDC: 0 to 1.6 Amps, 5.1 VDC: 0 to 6 Amps, 3.3 VDC: 0 to 9 Amps |
|
Isolation (input to backplane): |
250 VAC continuous; 1500 VAC for 1 minute |
|
Ripple (all outputs) |
150 mV |
|
Noise (all outputs) |
150 mV |
|
Ride-through time |
20 ms. This is the length of time the Power Supply maintains valid outputs if the power source is interrupted |
|
Wiring Terminals |
Each terminal accepts one 14 AWG to 22 AWG wire. |
|
Current per Terminal |
6 Amps |
|
Number of Daisy-Chained PSA140 Supplies |
Up to 4 |
|
Number of PSA140 Power Supplies in Universal Backplane |
Up to 4 |
Troubleshooting
Troubleshooting IC695PSA140
Troubleshooting information is available on IC695PSA140's website page; it also includes a datasheet user-manual and a wiring diagram.
Repair your IC695PSA140
PDF Supply can repair your IC695PSA140 in 3-5 business days. And PDF Supply stands by all of its repairs with a 1 year customer satisfaction warranty.
Customer Questions and Answers
- Question: What is an IC695PSA140? Answer: The IC695PSA140 is a Multi-Purpose, 120/240 VAC or 125 VDC, 40 Watt Power Supply from the GE Fanuc RX3i Series.
- Question: From what input voltage source range does IC695PSA140 operate? Answer: This power supply operates from an input voltage source range of 85 to 264 VAC or 100 VDC to 300 VDC.
- Question: What 3 outputs does this power supply have? Answer:
- +5.1 VDC output
- +24 VDC relay output that can be used to power circuits on Output Relay modules
- +3.3 VDC which, is used internally by RX3i modules with IC695 catalog numbers
- Question: How many IC695PSA140's can be installed in a PACSystems RX3i Universal Backplane? Answer: Up to 4 multi-purpose power supplies (PSA140 and/or PSD140) can be used in a PACSystems RX3i Universal Backplane.
- Question: With what can IC695PSA140 not be used? Answer: This power supply cannot be used with other RX3i power supplies in redundant or increased capacity modes.
- Question: What do the 4 LEDs indicate? Answer:
- Power (Green/Amber). When this LED is green, it indicates power is being supplied to the backplane. When this LED is amber, power is applied to the power supply, but the power supply switch is off.
- P/S Fault (Red). When this LED is lit, it indicates the power supply has failed and is no longer supplying sufficient voltage to the backplane.
- Over Temperature (Amber). When this LED is lit, it indicates the power supply is near or exceeding its maximum operating temperature.
- Overload (Amber). When this LED is lit, it indicates the power supply is near or exceeding its maximum output capability on at least one of its outputs.
- Question: What should I do if my IC695PSA140 is not working properly? Answer: Your IC695PSA140 may need repair.
For more information on the IC695PSA140 Multi-Purpose, 120/240 VAC or 125 VDC, 40 Watt Power Supply of the GE Fanuc RX3i Series, please see the Datasheet User-Manual.
Revision History
|
Version |
Date |
Details |
|
IC695PSA140E |
May 2013 |
Increases the margin of the 5V and 3.3V under voltage detectors to prevent PS faults during power-up. |
|
IC695PSA140D |
Aug. 2012 |
Resolves an issue with powering up under light loads. |
|
IC695PSA140C |
Jun. 2011 |
Hardware modification improves radiated RF susceptibility and removes the requirement to install control systems that use this product in a grounded metal enclosure to meet the EU EMC Directive. |
|
IC695PSA140B |
Sep. 2006 |
Hardware modification. Previous versions of this Power Supply occasionally failed to power up when installed in a 16-Slot Universal Backplane, IC695CHS016. This update resolves the issue. |
|
IC695PSA140A |
Sep. 2005 |
Initial release. |
Common related search terms: BatteryBuy, Configuration, Datasheet, Dimension, Emerson, Fanuc, Firmware, GE-Fanuc, Manual, PDF, PLC, Price, Repair, Specification, Troubleshoot, User-Manual, Wiring,
