GE / IP FANUC Series 90/30 In Stock
IC695PBM300
RX3i PBM300 Communication
SKU 2177320 UPC 0914329153791
All product names, trademarks, brands and logos used on this site are the property of their respective owners. PDF Supply is not an authorized distributor, reseller or representative of the products featured on this website. The depiction, description or sale of products featuring these names, trademarks, brands and logos is for identification purposes only and is not intended to in indicate any affiliation with or authorization by any rights holder.
PDF Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with PDF Supply's 1-year, 2-year, or 3-year warranty.
Other Available Revisions for the IC695PBM300 IC695PBM300-AAIC695PBM300-BAIC695PBM300-BBIC695PBM300-BCIC695PBM300-CCIC695PBM300-LT
Common misspellings:
- 1C695PBM300
- IC695P8M300
- IC695PBM3o0
- IC695PBM30o
- IC695PBM300
Product Description
The IC695PBM300 is a PROFIBUS Master module from the GE Fanuc RX3i Series. This module allows the RX3i CPU to send and receive data on a PROFIBUS-DP network. See specifications for this unit on IC695PBM300's website page.
Technical Specifications
| Module Type: | PROFIBUS Master |
| Number of Slots: | 1 (single slot) |
| Backplane Support: | Universal |
| Protocol Support: | up to 125 PROFIBUS-DP slaves |
| Communication Ports: | RS-232 |
| Internal Power: | 440 mA @ 3.3 VDC |
Technical Information
Specifications:
|
Environment |
Storage temperature = -40ï‚°C to 85ï‚°C Operating temperature = 0ï‚°C to 60ï‚°C |
|
Backplane Compatibility |
RX3i PCI |
|
Backplane Current Consumption |
440 mA @ 3.3 Vdc |
|
Data rates |
Supports all standard data rates (9.6 kBit/s, 19.2 kBit/s, 93.75 kBit/s, 187.5 kBit/s, 500 kBit/s, 1.5 MBit/s, 3 MBit/s, 6 MBit/s and 12 MBit/s) |
|
Status Information Available |
Slave Status Bit Array Table Network Diagnostic Counters DP Master Diagnostic Counters Firmware Module Revision Slave Diagnostic Address |
|
Data Sizes |
The amount of data that can be configured on the PBM300 PROFIBUS network provides up to 3584 bytes input and 3584 bytes output. |
|
For product standards and general specifications, refer to the PACSystems RX3i System Manual, GFK-2314. |
|
Troubleshooting
Troubleshooting IC695PBM300
Troubleshooting information is available on IC695PBM300's website page; it also includes a datasheet user-manual and a wiring diagram.
Repair your IC695PBM300
PDF Supply can repair your IC695PBM300 in 3-5 business days. And PDF Supply stands by all of its repairs with a 1 year customer satisfaction warranty.
Customer Questions and Answers
- Question: What is an IC695PBM300? Answer: The IC695PBM300 is a PROFIBUS Master module from the GE Fanuc RX3i Series.
- Question: What does IC695PBM300 do? Answer: The RX3i PROFIBUS Master module allows the RX3i CPU to send and receive data on a PROFIBUS-DP network.
- Question: What are some of the features of IC695PBM300? Answer:
- Supports up to 125 PROFIBUS-DP slaves
- Supports up to 244 bytes of input data and 244 bytes of output data per slave
- Supports up to 3,584 bytes of input data and 3,584 bytes of output data- total
- Supports all standard data rates
- Supports Sync and Freeze modes
- Supports DP-V1 read, write, and alarm messages
- PROFIBUS-compliant module and network status LEDs
- Question: What version of CPU firmware does this module require? Answer: IC695PBM300 requires an RX3i CPU with firmware version 2.9 or later.
- Question: Where must IC695PBM300 be located? Answer: This module must be located in a RX3i Universal Backplane.
- Question: For configuration, what does this module require? Answer: This module requires Machine Edition Version 5.0 SP2 Logic Developer-PLC or later for configuration.
- Question: What should I do if my IC695PBM300 is not working properly? Answer: Your IC695PBM300 may need repair.
For more information on the IC695PBM300 PROFIBUS Master Module of the GE Fanuc RX3i Series, please see the Datasheet User-Manual.
|
Rel. |
Ver. |
Date |
IPI |
Upgrade Kit |
New Features |
Problems Resolved |
|
CC |
1.04 |
Jun-2010 |
GFK-2359D |
44A753033-G01 |
N/A |
N/A - Label change only. No change in functionality, performance or compatibility. |
|
BC |
1.04 |
May-2006 |
GFK-2359C |
44A753033-G01 |
N/A |
When multiple Lumberg devices (8in4out) are connected to the bus and power is removed from these devices, but the PBM300 remains powered, the inputs assigned to the Lumberg devices will toggle between 1 and 0. Configuring slaves with a large amount of parameter data returns the correct error code when parameter data exceeds the available memory space. |
|
BB |
1.02 |
Apr-2005 |
GFK-2359B |
44A753033-G01 |
The number of Message Segments used to hold mail messages has been doubled from 32 to 64. |
When a Get Master Status CommReq is called on the first PLC scan, the CommReq no longer falsely returns a positive indication that the Profibus network has ý1 or More Slaves Not in IO Exchange Mode.ý |
|
BA |
1.00 |
Feb-2005 |
GFK-2359A |
NA |
UL Class I, Groups A, B, C & D, Div 2 Hazardous Locations |
NA |
|
AA |
1.00 |
Dec-2004 |
GFK-2359 |
N/A |
Initial Release of Product |
Initial Release of Product |
Common related search terms: BatteryBuy, Configuration, Datasheet, Dimension, Emerson, Fanuc, Firmware, GE, GE-Fanuc, Manual, PDF, PLC, Price, Repair, Specification, Troubleshoot, User-Manual, Wiring,
