1-919-535-3180
[email protected]

GE / IP FANUC Series 90/30 In Stock

World's Largest Warehouse

of GE 90-30, Genius, and RX7i

1-919-535-3180

Mon-Fri 8AM-5PM EST

[email protected]

IC695MDL765

RX3i MDL765 Digital I/O

★ ★ ★ ★ ★ Rated 4.5/5 Based on 6 ratings.

Rate your purchase of the IC695MDL765

SKU 2174301  UPC 025039025466

All product names, trademarks, brands and logos used on this site are the property of their respective owners. PDF Supply is not an authorized distributor, reseller or representative of the products featured on this website. The depiction, description or sale of products featuring these names, trademarks, brands and logos is for identification purposes only and is not intended to in indicate any affiliation with or authorization by any rights holder.

PDF Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with PDF Supply's 1-year, 2-year, or 3-year warranty.

New

$2562

2 In Stock

✓  2 Year PDF Supply Warranty

*Need a Specific Revision?

Ships .

Other Available Revisions for the IC695MDL765 IC695MDL765-AAIC695MDL765-ABIC695MDL765-BBIC695MDL765-LT

Common misspellings:
  • 1C695MDL765
  • IC695MD1765
  • IC695MDL765

Product Description

The IC695MDL765 is a 16-Point, 24/125 volt DC, Positive Logic, Smart Digital Output module from the GE Fanuc RX3i Series.  This module provides 16 discrete output points in 2 groups of eight.  See specifications for this unit on IC695MDL765's website page.

Technical Specifications

Rated Voltage: 24/125 volts DC
# of Outputs: 16 (2 isolated groups of 8) 
Freq: N/A
Output Current: 2 A per point
Output Voltage Range:   18 to 30VDC, 105 to 132VDC 
Power Consumption:   152 mA @ 3.3VDC, 540 mA @ 5VDC


 

Technical Information

Specifications:

Field Power Voltage (24V† nominal I/O), VIn

18 Vdc to 60Vdc

Field Power Voltage (125V nominal I/O), VIn

105 Vdc to 132Vdc

Ripple Voltage, Field Power

10%Vpp

Outputs per Module

16 (two isolated groups of 8 outputs each)

Isolation

Field to Backplane

Continuous For 1 minute

 

250Vac 1500Vac

Group to Group

Continuous For 1 minute

 

250Vac 1500Vac

Backplane Power Consumption

+3.3Vdc

+5.1Vdc

 

152mA

540mA

Thermal Derating

None required with output currents of 1 amp per channel. For 2 amps per channel, see Thermal Derating below.

Continuous Output Current per Point

Refer to Output Load Ratings  below.

Output Characteristics

Peak Inrush Current

10A supplied for 10ms without ESCP  trip

Output Leakage Current

1mA maximum

Group Output Current at 35⁰C ambient

8A maximum

Module Output Current at 35⁰C  ambient

16A maximum

Sourcing Circuit Output On Voltage (IOUT = 2A )

(VIn-2) to VIn

Minimum Load Current with no-load detection enabled

50 mA

On  Response Time

1ms maximum

Off  Response Time

1ms maximum

Maximum Switching Frequency

Refer to Output Load Ratings  below.

 

Protection

Short-circuit protection, overcurrent protection, and overtemperature protection.

Recovery from overtemperature, short-circuit, and overcurrent faults is accomplished by  turning the point off and  back on.

† For use with 48V nominal loads, configure the channel to 24VDC operation.

Troubleshooting

Troubleshooting IC695MDL765

Troubleshooting information is available on IC695MDL765's website page; it also includes a datasheet user-manual and a wiring diagram.


Repair your IC695MDL765

PDF Supply can repair your IC695MDL765 in 3-5 business days. And PDF Supply stands by all of its repairs with a 1 year customer satisfaction warranty.

Customer Questions and Answers

  • Question:  What is an IC695MDL765?  Answer:  The IC695MDL765 is a 16-Point, 24/125 VDC, Positive Logic, Smart Digital Output module from the GE Fanuc RX3i Series. 
  •  Question:  What does IC695MDL765 provide?  Answer:  This module provides 16 discrete output points in 2 groups of 8.
  • Question:  What characteristics does the IC695MDL765 have?  Answer:  This module has positive logic characteristics; it sources current to the loads from the user common or positive power bus. 
  • Question:  How are output devices connected?  Answer:  They are connected between the negative power bus and the module terminals.
  • Question:  What are some of the features of the Smart Digital Output Module?  Answer:  The features include:
    • Output Pulse Test Capability
    • Output Hold Last State or Default
  • Question:  What do the green LED lights indicate?  Answer:  The 16 green LED lights indicate ON/OFF status of the points 1 thru 16
  • Question:  What do the field status LEDs (S1 and S2) indicate?  Answer:  The field status LEDs (S1 and S2) indicate whether the external +24 VDC or +125 VDC power supply is present and above the minimum level, whether faults are present, and whether the terminal block is locked into place. 
  • Question:  The red bands on the label indicate what?  Answer:  The red bands let you know that the IC695MDL765 is a high-voltage module.
  • Question:  Into what slot can the IC695MDL765 be installed?  Answer:  This module can be installed in any I/O slot of an RX3i system.
  • Question:  What should I do if my IC695MDL765 is not working properly?  Answer:  Your IC695MDL765 may need repair. 

For more information on the IC695MDL765 16-Point, 24/125 VDC, Positive Logic, Smart Digital Output Module of the GE Fanuc RX3i Series, please see the Datasheet User-Manual.

Current Release

 

Part Number

Firmware Revisions

Comments

IC695MDL765-BB

Primary: 1.01

Boot: 1.01

The catalog number has been revised for manufacturing reasons. There is no other change in the delivered product.

Release History

 

Part Number

Firmware Revisions

Comments

IC695MDL765-AB

Primary: 1.01

Boot: 1.01

Resolves a problem with some modules failing to power up properly under  elevated temperature conditions.

IC695MDL765-AA

Primary: 1.00

Boot: 1.00

Initial Release
ST. LOUIS, Feb. 1, 2019 – Emerson today announced it has completed the purchase of Intelligent Platforms from General Electric.

PDF Supply sells used surplus products. PDF Supply is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by PDF Supply come with PDF Supply’s 1-year, 2-year, or 3-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.

Rockwell Disclaimer: The product is used surplus. PDF Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because PDF Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, PDF Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. PDF Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. PDF Supply also makes no representations as to your right to install any such firmware on the product. PDF Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.