GE / IP FANUC Series 90/30 In Stock
IC695MDL664
RX3i MDL664 Digital I/O
SKU 2170210 UPC 0338354623973
All product names, trademarks, brands and logos used on this site are the property of their respective owners. PDF Supply is not an authorized distributor, reseller or representative of the products featured on this website. The depiction, description or sale of products featuring these names, trademarks, brands and logos is for identification purposes only and is not intended to in indicate any affiliation with or authorization by any rights holder.
PDF Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with PDF Supply's 1-year, 2-year, or 3-year warranty.
Other Available Revisions for the IC695MDL664 IC695MDL664-AAIC695MDL664-ABIC695MDL664-BBIC695MDL664-LT
Common misspellings:
- 1C695MDL664
- IC695MD1664
- IC695MDL66A
- IC695MDL664
Product Description
The IC695MDL664 is a 16-Point, 24 Volt DC, Positive Logic, Input module of the GE Fanuc RX3i Series. This module provides 16 positive logic input points in 2 groups of 8 inputs. See specifications for this unit on IC695MDL664's website page.
Technical Specifications
| Rated Voltage: | 24 volts DC |
| # of Inputs: | 16 (2 isolated groups of 8) |
| Freq: | N/A |
| Input Current: | 12.2 mA |
| Input Voltage Range: | 18 to 32VDC |
| Power Consumption: | 95 mA @ 3.3V, 225 mA @ 5V |
Technical Information
Specifications:
|
Inputs per Module |
16 (two isolated groups of 8 inputs each) |
|
Power Requirements |
|
|
Input Voltage (24V nominal), VIN |
18 Vdc–32 Vdc |
|
Ripple Voltage, maximum |
10% Vpp |
|
Backplane Power Consumption +3.3Vdc +5.1Vdc |
95 mA 225 mA (worst-case, i.e. with all channels on.) |
|
Thermal derating |
None required with input voltages in the 18 Vdc–24 Vdc range. For the 25 Vdc–32 Vdc range, see the Thermal Derating below. |
|
Input Characteristics |
|
|
DC Characteristics |
|
|
Input Resistance |
1966 Ω |
|
Input Capacitance |
0.05 μf |
|
Input Current (at 24Vdc) |
12.2 mA |
|
Input Voltage ON (Logic 1) |
0.5 × VIN Vdc |
|
Input Voltage OFF (Logic 0) |
0.3 × VIN Vdc |
|
AC Characteristics |
|
|
Turn On Delay, typical |
20.6 ms |
|
Turn Off Delay, typical |
20.6 ms |
|
Digital Input Filter Time |
0.5–100 ms, 20 ms default |
|
Isolation |
|
|
Field to Backplane Continuous For 1 minute |
250 Vac 1500 Vac |
|
Group to Group |
250 Vac 1500 Vac |
Troubleshooting
Troubleshooting IC695MDL664
Troubleshooting information is available on IC695MDL664's website page; it also includes a datasheet user-manual and a wiring diagram.
Repair your IC695MDL664
PDF Supply can repair your IC695MDL664 in 3-5 business days. And PDF Supply stands by all of its repairs with a 1 year customer satisfaction warranty.
Customer Questions and Answers
- Question: What is an IC695MDL664? Answer: The IC695MDL664 is a 16-Point, Positive Logic, 24 VDC, Input module from the GE Fanuc RX3i Series.
- Question: What does IC695MDL664 provide? Answer: This module provides 16 input points in 2 isolated groups of 8 Inputs each.
- Question: How can the module be wired? Answer: This input module uses 24 VDC field input power.
- Question: With what are the input characteristics compatible? Answer: The input characteristics are compatible with a wide range of input devices, such as pushbuttons, limit switches, and electronic proximity switches.
- Question: Current into an input point results in what? Answer: Current into an input point results in a logic 1 in the input status table (%I).
- Question: By what power do field devices operate? Answer: Power to operate field devices must be supplied by the user.
- Question: Sixteen green LEDs indicate what? Answer: Sixteen green LEDs indicate the ON/OFF status of points 1 through 16.
- Question: The blue bands on the label let you know what? Answer: They let you know that IC695MDL664 is a low-voltage module.
- Question: Into what slot can IC695MDL664 be installed? Answer: This module can be installed in any I/O slot of an RX3i system.
- Question: What should I do if my IC695MDL664 is not working properly? Answer: Your IC695MDL664 may need repair.
For more information on the IC695MDL664 16-Point, Positive Logic, 24 VDC, Input Module of the GE Fanuc RX3i Series, please see the Datasheet User-Manual.
Current Release
|
Part Number |
Firmware Revisions |
Comments |
|
IC695MDL664-BB |
Primary: 1.01 Boot: 1.01 |
The catalog number is being bumped for manufacturing reasons. There is no other change in the delivered product. |
Release History
|
Part Number |
Firmware Revisions |
Comments |
|
IC695MDL664-AB |
Primary: 1.01 Boot: 1.01 |
Resolves a problem with some modules failing to power up properly under elevated temperature conditions. |
|
IC695MDL664-AA |
Primary: 1.00 Boot: 1.00 |
Initial Release |
Common related search terms: BatteryBuy, Configuration, Datasheet, Dimension, Emerson, Fanuc, Firmware, GE, GE-Fanuc, Manual, PDF, PLC, Price, Repair, Specification, Troubleshoot, User-Manual, Wiring,
