GE / IP FANUC Series 90/30 In Stock
IC695LRE001
RX3i LRE001 Communication
SKU 2174055 UPC 0494560208233
All product names, trademarks, brands and logos used on this site are the property of their respective owners. PDF Supply is not an authorized distributor, reseller or representative of the products featured on this website. The depiction, description or sale of products featuring these names, trademarks, brands and logos is for identification purposes only and is not intended to in indicate any affiliation with or authorization by any rights holder.
PDF Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with PDF Supply's 1-year, 2-year, or 3-year warranty.
Other Available Revisions for the IC695LRE001 IC695LRE001AIC695LRE001BIC695LRE001CIC695LRE001DIC695LRE001-LT
Common misspellings:
- 1C695LRE001
- IC6951RE001
- IC695LREo01
- IC695LRE0o1
- IC695LRE00l
- IC695LRE001
Product Description
The IC695LRE001 is a Serial Bus Transmitter module from the GE Fanuc RX3i Series. This module provides communications between a PACSystems RX3i Universal Backplane and serial expansion and remote backplanes. See specifications for this unit on IC695LRE001's website page.
Technical Specifications
| Module Type: | Serial Bus Transmitter |
| Number of Slots: | 1 (single slot) |
| Current Required: | 132 mA @ 5V |
| Serial Ports: | RS-232 |
| Effective Data Rate: | 500k Bytes per sec |
| Max Cable Length: | 50 feet - Expansion, 700 feet - Remote |
Technical Information
Module Specifications
|
Current Required from Backplane |
5.0V: 132mA |
|
Maximum Total Expansion Cable Length |
15 meters (50 feet) – Expansion Backplanes 213 meters (700 feet) – Remote Backplanes |
|
Effective Data Rate |
500k Bytes per second if the expansion bus includes Remote backplanes. |
|
Electrical Isolation |
Non-isolated differential communications |
|
Serial Port |
Station Manager Port: RS-232 DCE, 1200 - 115200 bps. |
Cable Specifications
Connector part numbers are provided for reference only. Any part meeting the same specifications could be used for making custom cables.
|
Cable Belden 8107 only (no substitutes): |
Computer cable, overall braid over foil shield, twisted–pair |
|
30 volt/80°C (176°F), 24 AWG (.22mm2) tinned copper, 7 x 32 stranding |
|
|
Velocity of propagation = 70% , Nominal impedance = 100 Ohms |
|
|
25 Pin Male Connector |
Crimp Plug = Amp 207464–7; Pin = Amp 66506–9 |
|
Solder Plug = Amp 5-747912–2 |
|
|
25 Pin Female Connector |
Crimp Receptacle = Amp 207463–1; Pin = Amp 66504–9 |
|
Solder Receptacle = Amp 5-747913–2 |
|
|
Connector Shell |
Kit – Amp 5745833–5: Metal–plated plastic (plastic with nickel over copper), Crimp ring – Amp 745508–1, split ring ferrule |
Troubleshooting
Troubleshooting IC695LRE001
Troubleshooting information is available on IC695LRE001's website page; it also includes a datasheet user-manual and a wiring diagram.
Repair your IC695LRE001
PDF Supply can repair your IC695LRE001 in 3-5 business days. And PDF Supply stands by all of its repairs with a 1 year customer satisfaction warranty.
Size of the Captive Screw on the IC695LRE001
Description
What is the size of the captive screw on the IC695LRE001?
Resolution
M3.5 thread size x 0.6 thread pitch x 12mm long Phillips cross-recessed pan head steel machine screw and external tooth lock washer assembly with no plating.
Customer Questions and Answers
- Question: What is an IC695LRE001? Answer: The IC695LRE001 is a Serial Bus Transmitter module from the GE Fanuc RX3i Series.
- Question: What does IC695LRE001 provide? Answer: This module provides communications between a PACSystems RX3i Universal Backplane (IC695-model number) and serial expansion and remote backplanes (IC694- or IC693-model numbers).
- Question: What does IC695LRE001 translate? Answer: This module translates the signal levels present in the Universal Backplane to the signal levels required by a Serial Expansion Backplane.
- Question: Where must IC695LRE001 reside? Answer: This module must reside in the special expansion connector on the right end of the Universal Backplane.
- Question: What does the EXP OK LED indicate when lit? Answer: This LED is lit when backplane 5V power is applied to the module.
- Question: What does the Expansion Active LED indicate when lit? Answer: The Expansion Active LED indicates the status of the expansion bus. This LED is ON when the Expansion module is communicating with expansion backplanes. It is OFF when they are not communicating.
- Question: For what is the connector on the front of the module used? Answer: The connector on the front of the module is used to attach the expansion cable.
- Question: What should I do if my IC695LRE001 is not working properly? Answer: Your IC695LRE001 may need repair.
For more information on the IC695LRE001 Serial Bus Transmitter Module of the GE Fanuc RX3i Series, please see the Datasheet User-Manual.
Release History
|
Catalog Number |
Date |
Description |
|
IC695LRE001D |
October 2014 |
Backplane engagement and manufacturability improvements |
|
IC695LRE001C |
October 2008 |
Hardware changes for EU-RoHS compliance |
|
IC695LRE001B |
September 2007 |
ATEX approval for Group 2, Category 3 applications. |
|
IC695LRE001A |
August 2004 |
Initial product release |
Common related search terms: BatteryBuy, Configuration, Datasheet, Dimension, Emerson, Fanuc, Firmware, GE, GE-Fanuc, Manual, PDF, PLC, Price, Repair, Specification, Troubleshoot, User-Manual, Wiring,
