GE / IP FANUC Series 90/30 In Stock
IC695GCG001
RX3i GCG001 Accessory
SKU 2173333 UPC 0799705806788
All product names, trademarks, brands and logos used on this site are the property of their respective owners. PDF Supply is not an authorized distributor, reseller or representative of the products featured on this website. The depiction, description or sale of products featuring these names, trademarks, brands and logos is for identification purposes only and is not intended to in indicate any affiliation with or authorization by any rights holder.
PDF Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with PDF Supply's 1-year, 2-year, or 3-year warranty.
Other Available Revisions for the IC695GCG001 IC695GCG001-AAIC695GCG001-ABIC695GCG001-ACIC695GCG001-ADIC695GCG001-BDIC695GCG001-CDIC695GCG001-LT
Common misspellings:
- 1C695GCG001
- IC695GCGo01
- IC695GCG0o1
- IC695GCG00l
- IC695GCG001
Coming Soon
Technical Information
The IC695GCG001 communication gateway belongs to the RX3i Genius series of products designed by GE Fanuc. It has a Simplex Genius serial bus that interfaces Genius I/O devices to a PROFINET I/O controller. It acts as a Genius Bus controller module on a Genius network. The IC695GCG001 communication gateway provides 2 RJ-45 Ethernet ports which can be used to connect the module to a GE PROFINET controller. Each of the Ethernet ports operates independently via an Ethernet switch which is embedded in it. This module comes with 4 indicator LEDs to display the status of the module and its operations. The LEDs are the “POWER,” “OK,” “FAULT,” and “CONNECT” LEDs. The module also has 2 indicator LEDs to display the status of the Genius Bus and they are the “COM” and “BUS B” LEDs.
The IC695GCG001 RX3i Genius communication gateway scans the I/O devices which are connected to its serial bus while exchanging the retrieved data with the PROFINET I/O controller which is connected over Ethernet ports. It can also manage the I/O status of the configured individual modules, even if the communication between devices is interrupted. It can handle up to 31 Genius I/O modules on a single Genius serial bus. The IC695GCG001 RX3i Genius communication gateway has 6 Genius serial terminal Bus connectors. It requires a 24 Volts DC user-supplied power source to power up. The bottom of the module has a screw terminal block that can be used to connect the power supply. The module draws 0.2 Amps of maximum current from the power source. It also has an SD card slot that supports a non-volatile memory card as backup storage.
|
Catalog No. |
Firmware Version |
Date |
Description |
|
IC695GCG001-CD |
2.0.1.0 |
Nov 2016 |
Product updated due to component obsolescence of internal serial flash memory device. Added WEEE symbol. |
|
IC695GCG001-BD |
2.0.1.0 |
Aug 2016 |
Removed the unused Genius B connector and the Bus B LED. |
|
IC695GCG001-AD |
2.0.1.0 |
Aug 2016 |
Adds support for the VersaMax Genius Network Interface, the IC660BBS101 isolated I/O block, and additional Genius baud rates. Fixes a problem with input data mapping for the IC660BBD120 High-Speed Counter. |
|
IC695GCG001-AC |
1.1.1.0 |
Feb 2016 |
Changed behavior of Genius Block circuit fault. |
|
IC695GCG001-AB |
1.1.0.4 |
Feb 2015 |
Fixes output glitch issues and adds enhancement to Clear All Circuit Faults COMMREQ. |
|
IC695GCG001-AA |
1.0.4.14 |
June 2014 |
Initial Release. |
Common related search terms: BatteryBuy, Configuration, Datasheet, Dimension, Emerson, Fanuc, Firmware, GE, GE-Fanuc, Manual, PDF, PLC, Price, Repair, Specification, Troubleshoot, User-Manual, Wiring,
