1-800-360-6802
[email protected]

GE / IP FANUC Series 90/30 In Stock

World's Largest Warehouse

of GE 90-30, Genius, and RX7i

1-800-360-6802

Mon-Fri 8AM-5PM EST

[email protected]

IC695EIS001

RX3i EIS001 Accessory

★ ★ ★ ★ ★ Rated 4.5/5 Based on 7 ratings.

Rate your purchase of the IC695EIS001
PACSystems RX3i IEC60870-5-104 Ethernet Server | Image

SKU 2176146  UPC 0799705806771

All product names, trademarks, brands and logos used on this site are the property of their respective owners. PDF Supply is not an authorized distributor, reseller or representative of the products featured on this website. The depiction, description or sale of products featuring these names, trademarks, brands and logos is for identification purposes only and is not intended to in indicate any affiliation with or authorization by any rights holder.

PDF Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with PDF Supply's 1-year, 2-year, or 3-year warranty.

New

$4026

5 In Stock

✓  2 Year PDF Supply Warranty

*Need a Specific Revision?

Ships .

Other Available Revisions for the IC695EIS001 IC695EIS001-AAIC695EIS001-BBIC695EIS001-CCIC695EIS001-CDIC695EIS001-CEIC695EIS001-LT

Common misspellings:
  • 1C695EIS001
  • IC695E1S001
  • IC695EISo01
  • IC695EIS0o1
  • IC695EIS00l
  • IC695EIS001

Product Description

The IC695EIS001 is an Ethernet IEC 60870-5-104 Server Module from the GE Fanuc RX3i Series.  This module implements the IEC Communications protocol.  See specifications for this unit on IC695EIS001's website page.

Technical Specifications

Module Type: Ethernet 104 Server Module
LEDs: ETHERNET OK, LAN OK, LOG EMPTY
Backplane Support:  Universal
IP Addresses: 1
Ethernet Ports:  (2) RJ-45 (10BaseT/100BaseTX)
Serial Ports: (1) RS-232 DCE

 

Technical Information

Specifications

Module Name

PACSystems RX3i Ethernet 104 Server Module

Catalogue

IC695EIS001-AA

Protocol Supported

IEC104 Server

Connectors

-  Station Manager (RS-232) Port: 9-pin female D-connector

-  Two 10BaseT / 100BaseTX Ports: 8-pin female shielded RJ-45

LAN

IEEE 802.2 Logical Link Control Class I

IEEE 802.3 CSMA/CD Medium Access Control 10/100 Mbps

Number of IP addresses

One

Number of Ethernet Port Connectors

Two. both are 10BaseT / 100BaseTX with auto-sensing RJ-45 connection.

Embedded Ethernet Switch

Yes – Allows daisy-chaining of Ethernet nodes.

Serial Port

Station Manager Port: RS-232 DCE, 1200 – 115,200 bps

Modules per RX3i CPU

4

Number of 104 Clients supported per module

1 per module

Number of 104 Sectors supported per module

1 per module

Number of 104 Clients supported per RX3i CPU

4 per RX3i CPU

Number of 104 points per module

61441

Network Topology supported

Star, Line, Daisy Chain

Hot Swappable

Yes

Time Synchronization

SNTP Client

 

Power Requirements

3.3V: 0.840 A maximum

5 V:  0.614 A maximum

Troubleshooting

Troubleshooting IC695EIS001

Troubleshooting information is available on IC695EIS001's website page; it also includes a datasheet user-manual and a wiring diagram.

 

Repair your IC695EIS001

PDF Supply can repair your IC695EIS001 in 3-5 business days. And PDF Supply stands by all of its repairs with a 1 year customer satisfaction warranty.

 Customer Questions and Answers

  • Question:  What is an IC695EIS001?  Answer:  IC695EIS001 is an Ethernet IEC 60870-5-104 Server Module from the GE Fanuc RX3i Series.
  • Question:  What does IC695EIS001 do for the RX3i system?   Answer:  This module implements the IEC communications protocol.
  • Question:  How does the IC695EIS001 operate?  Answer:  This module permits the controller to be connected to an Ethernet network using a standard TCP/IP connection scheme, allowing an IEC 104 Client to poll data from the Server, as well generate unsolicited communications from the Sertver back to the Client.
  • Question:  What are some of the operating features?  Answer:  
    • Supports 1 connection to the RX3i Controller data set specified in the configuration
    • Supports Interrogation and RBE for the Single Point and Double Point data and for Regulated Step
    • Supports 56 Bit IEC 60870-5-104 time format with the default being 56 bit time format
    • Firmware upgrades using WinLoader
    • Up to 4 EIS001 per RX3i system, as allowed by available power and slots
  • Question:  Where must IC695EIS001 be located?  Answer:  IC695EIS001 can be installed in any available backplane slot.
  • Question:  What should I do if my IC695EIS001 is not working properly?  Answer:  Your IC695EIS001 may need repair.

 

For more information on the IC695EIS001 Ethernet IEC 60870-5-104 Server Module of the GE Fanuc RX3i Series, please see the Datasheet User-Manual.

 

Release History

 

Catalog Number

Firmware Version

 

Date

 

Comments

IC695EIS001-CE

Firmware 6.41/1.40

Aug 2017

This firmware provides enhancement to enable Report by Exception of analog data without time stamp through ASDU13 spontaneously instead of ASDU36.

It also fixes issue where IEC104 Master reads incorrect data for transient period

(~100ms to 120ms) from EIS module (IEC104 server) intermittently over long duration of operation.

IC695EIS001-CD

Firmware 6.41/1.30

April 2016

This firmware enables multiple IEC 104 Clients connections to the IEC 104 Server module (Max 8 Connections). It aslo  provides a mechanism to shift RBE (Report  By Exception) data during runtime, on one specific Client connection associated with a specified Port Number using COMMREQ (Communication request) in the

Controller logic.

IC695EIS001-CC

Firmware 6.40 /1.20

Boot 3.71

Feb 2016

This Firmware fixes issue with module going unexpectedly in firmware update mode, as part of the Web upgrade kit.

An enhancement was made to prevent the module from becoming unresponsive

and requiring a power cycle if it was subjected to heavy network storm traffic.

IC695EIS001-BB

1.10

Apr 2015

The Memory Address Translation feature added in this release supports Unambiguous (Unique) Object Addressing as required by some legacy SCADA clients (like CPELE/SAGE). Refer to PACSystems RX3i Ethernet IEC 104 Server

Module IC695EIS001 User  Manual, GFK-2949A or  later for details.

IC695EIS001-AA

1.00

Dec 2014

Initial release.

 

ST. LOUIS, Feb. 1, 2019 – Emerson today announced it has completed the purchase of Intelligent Platforms from General Electric.

PDF Supply sells used surplus products. PDF Supply is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by PDF Supply come with PDF Supply’s 1-year, 2-year, or 3-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.

Rockwell Disclaimer: The product is used surplus. PDF Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because PDF Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, PDF Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. PDF Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. PDF Supply also makes no representations as to your right to install any such firmware on the product. PDF Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.