GE / IP FANUC Series 90/30 In Stock
IC695ECM850
RX3i ECM850 Accessory
SKU 2170316 UPC 0799705806757
All product names, trademarks, brands and logos used on this site are the property of their respective owners. PDF Supply is not an authorized distributor, reseller or representative of the products featured on this website. The depiction, description or sale of products featuring these names, trademarks, brands and logos is for identification purposes only and is not intended to in indicate any affiliation with or authorization by any rights holder.
PDF Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with PDF Supply's 1-year, 2-year, or 3-year warranty.
Other Available Revisions for the IC695ECM850 IC695ECM850-AAIC695ECM850-LT
Common misspellings:
- 1C695ECM850
- IC695ECMb50
- IC695ECM85o
- IC695ECM850
Product Description
The IC695ECM850 is an IEC 61850 Ethernet Communication Module from the GE Fanuc RX3i Series. This module connects an RX3i controller to an IEC 61850 network. See specifications for this unit on IC695ECM850's website page.
Technical Specifications
| Module Type: | Ethernet Communication Module |
| LEDs: | OK, LAN, STATUS, CONN, ACTIVE, USB & (4) PRTs |
| Backplane Support: | Universal |
| IP Addresses: | 1 |
| Ethernet Ports: | (2) RJ-45 & (2) SFP Cages |
| USB Ports: | (1) micro USB for comms |
Technical Information
Specifications
|
Protocol Support |
IEC 61850 Client as per PICs and MICs specifications |
|
CPU Compatibility |
RX3i CPUs with firmware version 8.05 or higher (CRU320, CPU320, CPU315, CPE305, CPE310) |
|
Proficy* Machine Edition Compatibility |
Machine Edition 8.0 SIM 7 |
|
Power Requirements |
3.3V: 1.2 A with no SFP devices installed 1.9 A maximum (2 SFP devices installed, 0.35 A per SFP device) |
|
5V: 1.1 A maximum |
|
|
Operating Temperature Range |
0 to 60°C Derated to 57°C: • if 100 MB Fiber SFPs installed, or • if Copper SFPs operating at 1 GB. |
|
Number of Port Connectors |
Two RJ-45 and Two SFP Cages (SFP devices not included, available separately.) |
|
Micro USB Connector |
One, for communication with a computer using Command Line Interface. |
|
Local Area Network (LAN) |
IEEE 802.2 Logical Link Control Class I IEEE 802.3 CSMA/CD Medium Access Control 10/100/1000 Mbps |
|
CPU Status Bits |
32 |
|
Polling Rate2 |
Configurable for every IED connection from 0 to 31267 msec (default is 1000 msec). |
|
Number of IP Addresses |
One |
|
Number of MAC Addresses |
Five. One per external port and one internal. |
|
Network Topologies Supported |
Star (switched), linear (daisy-chain) |
|
Time Synchronization |
SNTP Client – Multicast and Broadcast |
|
System Maximum Limits |
|
|
ECM850s per RX3i CPU |
Four (4). All must be located in main rack. (Use in remote or expansion racks not supported). |
|
No of IED connections supported per ECM850 |
32 |
|
No of IED connections supported per RX3i CPU |
128 |
|
Maximum I/O Memory per ECM850 |
32 Kbytes of combined Input/Output memory |
|
Maximum I/O Memory per RX3i CPU |
128 Kbytes of combined Input/Output memory |
|
No of PLC Protocol Variables1 (PPVs) per ECM850 |
5000 |
|
No of PPVs per RX3i CPU |
20000 |
|
Hot-swappable |
Yes |
1 “PLC Protocol Variables” is defined as the set of RX3i controller variables which represent the IEC 61850 protocol data attributes in a structured format in a variable list. This typically includes the additional variables which are required to perform “WRITE” operations to an IED. See section 3.3.9 Generate PLC Protocol Variables (PPVs) for each ECM850, for more details.
2 The polling rate for each IED connection can be configured by the IEC 61850 Configurator. ECM850 also supports unsolicited communication using report control blocks (RCB). The RCB can be used for faster updates irrespective of polling rate, based on RCB trigger options. The configuration of polling rate and RCBs is described in Chapter 3, and polling mechanisms are described in section 4.3 ECM850 I/O Scan Mechanism.
For product standards, general operating specifications, and installation requirements, refer to the PACSystems RX3i System Manual, GFK-2314.
Troubleshooting
Troubleshooting IC695ECM850
Troubleshooting information is available on IC695ECM850's website page; it also includes a datasheet user-manual and a wiring diagram.
Repair your IC695ECM850
PDF Supply can repair your IC695ECM850 in 3-5 business days. And PDF Supply stands by all of its repairs with a 1 year customer satisfaction warranty.
Customer Questions and Answers
- Question: What is an IC695ECM850? Answer: IC695ECM850 is an IEC61850 Ethernet Communications Module from the GE Fanuc RX3i Series.
- Question: What does IC695ECM850 do for the RX3i system? Answer: This module connects an RX3i controller to an IEC 61850 network.
- Question: How does the IC695ECM850 operate? Answer: This module enables the controller to act as an IEC 61850 Client and communicate with Intelligent Electronic Devices (IEDs).
- Question: What are some of the operating features? Answer:
- Supports multiple IEC 61850 client features
- Full programming and configuration services
- Supports programming in hot standby redundant systems
- Firmware upgrades using WinLoader
- Four switched Ethernet ports
- Question: Where must IC695ECM850 be located? Answer: IC695ECM850 can be installed in any available backplane slot.
- Question: What should I do if my IC695ECM850 is not working properly? Answer: Your IC695ECM850 may need repair.
For more information on the IC695ECM850 Ethernet Communication Module of the GE Fanuc RX3i Series, please see the Datasheet User-Manual.
Release History
|
Catalog No. |
Firmware Version |
Date |
Comments |
|
IC695ECM850-AA |
1.00 |
February 2014 |
Initial release. |
Common related search terms: BatteryBuy, Configuration, Datasheet, Dimension, Emerson, Fanuc, Firmware, GE, GE-Fanuc, Manual, PDF, PLC, Price, Repair, Specification, Troubleshoot, User-Manual, Wiring,
