1-800-360-6802
[email protected]

GE / IP FANUC Series 90/30 In Stock

World's Largest Warehouse

of GE 90-30, Genius, and RX7i

1-800-360-6802

Mon-Fri 8AM-5PM EST

[email protected]

IC695ALG704

RX3i ALG704 Analog

★ ★ ★ ★ ★ Rated 4.7/5 Based on 12 ratings.

Rate your purchase of the IC695ALG704

SKU 2174014  UPC 0704430514624

All product names, trademarks, brands and logos used on this site are the property of their respective owners. PDF Supply is not an authorized distributor, reseller or representative of the products featured on this website. The depiction, description or sale of products featuring these names, trademarks, brands and logos is for identification purposes only and is not intended to in indicate any affiliation with or authorization by any rights holder.

PDF Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with PDF Supply's 1-year, 2-year, or 3-year warranty.

New

$1626

5 In Stock

✓  2 Year PDF Supply Warranty

*Need a Specific Revision?

Ships .

Reman

$1021

Save $605

1 In Stock

✓  2 Year PDF Supply Warranty

*What is Remanufactured?

Ships .

Other Available Revisions for the IC695ALG704 IC695ALG704-AAIC695ALG704-ABIC695ALG704-BBIC695ALG704-CBIC695ALG704-DCIC695ALG704-LT

Common misspellings:
  • 1C695ALG704
  • IC695A1G704
  • IC695ALG7o4
  • IC695ALG70A
  • IC695ALG704

Product Description

The IC695ALG704 is a 4-Channel, Non-Isolated, Voltage/Current, Analog Output Module from the GE Fanuc RX3i Series. This module provides 4 configurable voltage or current output channels.  See specifications for this unit on IC695ALG704's website page.

Technical Specifications

No. of channels: 4
Voltage Range: 0 to +10 V, -10 to +10 V
Current Range: 0-20 mA, 4-20 mA
Update Rate: 8 msec
Output Load: 850 Ohms max
Power Consumption:   375 mA @ +3.3VDC,  160 mA @ +24VDC Isolated

 

 

Technical Information

Specifications

 

Output Ranges

Current: 0 to 20mA, 4 to 20mA Voltage: +/- 10V, 0 to 10V

Backplane Power Requirements

IC695ALG704: 320mA maximum at 3.3V IC695ALG708:330mA maximum at 3.3V

IC605ALG728 with HART enabled: 340mA  maximum at 3.3V

Power Dissipation within Module

IC695ALG704: 4.8 Watts maximum (Vuser=24V)

IC695ALG708,  IC695ALG728:  7.25 Watts maximum (Vuser=24V)

Thermal Derating

IC695ALG704: no derating.

IC695ALG708, see derating curves later in this document IC695ALG728: please refer to the RX3i System Manual, GFK-2314C or

later for derating information.

External +Power Supply

Voltage Range: 19.2V to 30V (24V nominal) Current required for ALG704: 120mA maximum Current required for ALG708:  210mA maximum

Current required for ALG728:190mA maximum

Resolution

+/-10V: 15.9 bits,  0 to 10V: 14.9 bits,  0 to 20mA: 15.9 bits,

4 to 20mA : 15.6 bits

HART Communications

Version 5.0 HART protocol supported on module IC695ALG728.

Output Data Format

Configurable as floating point IEEE 32 bit or 16-bit integer in a 32-bit field

Analog Update Rate (Determined by I/O scan time, application dependent)

IC695ALG704 and ALG708: 8 milliseconds (approximate, all eight channels)

ALG728: 16mS with HART (approximate, all eight channels) 8mS without HART (approximate, all eight channels)

HART Data Scan Time (in seconds) The HART data scan can consist of up to four acquisition cycles (similar but asynchronous to the analog scan time).  Each cycle includes a specific set of channels.  Total HART scan

time depends on the number of channels enabed for HART within a specific set of channels, number of retries, enabling/disabling of slot variables, and use and configuration settings of pass-thru commands.

One HART Channel in Group

Each HART Data channel updates every 0.7 second (typical)

Two HART Channels in Group

Each HART Data channel updates every 1.9 seconds (typical)

Three HART Channels in Group

Each HART Data channel updates every 3.0 seconds (typical)

Four HART Channels in Group

Each HART Data channel updates every 4.0 seconds (typical)

Output Overvoltage Protection

Current outputs only:  -30V for 60 seconds, +30V for one hour

Calibrated Accuracy

Accurate to within 0.15% of full scale at 25°C Accurate to within 0. 25% of full scale at 60°C

In the presence of severe RF interference (IC 801-3, 10V/M), accuracy may be degraded to +/-1% FS.

Output Load Reactance

Current: 10µH maximum, Voltage: 1µF maximum

Maximmum Output Load

Current: 850 Ohms maximum at Vuser = 20V Voltage: 2 Kohms minimum

Output Gain Drift

Voltage output: 20ppm per degree C typical Current output: 35ppm per degree C typical

Output Settling Time

ALG704, ALG708: Voltage or current output: 2ms, 0 to 95% ALG728: Voltage Output:  2ms, 0 to 95%

Current output with HART: 70mS, 0 to 95% Current output without HART: 23ms, 0 to 95%

Isolation, Field to Backplane

2550VDC for one second

Maximum Compliance Voltage

Vuser  – 3V (minimum) to Vuser (maximum)

 

Troubleshooting

Troubleshooting IC695ALG704

Troubleshooting information is available on IC695ALG704's website page; it also includes a datasheet user-manual and a wiring diagram.

 

Repair your IC695ALG704

PDF Supply can repair your IC695ALG704 in 3-5 business days. And PDF Supply stands by all of its repairs with a 1 year customer satisfaction warranty.

Customer Questions and Answers

  • Question:  What is an IC695ALG704?  Answer:  The IC695ALG704 is a 4-Channel, Non-Isolated, Voltage/Current, Analog Output module from the GE Fanuc RX3i Series.
  • Question: What does IC695ALG704 provide?  Answer:  This module provides 4 configurable voltage or current output channels.
  • Question: The configuration for the analog channels can be in what output ranges?  Answer:
    • Current: 0 to 20mA, 4 to 20 mA
    • Voltage: +/- 10 V, 0 to 10 V
  • Question:  With what kind of terminal blocks can IC695ALG704 be used?  Answer:  IC695ALG704 can be used with a Box-style (IC694TBB032), Extended Box-style (IC694TBB132), Spring-style (IC694TBS032), or Extended Spring-style (IC694TBS132) Terminal Block.
  • Question: What do Extended Terminal Blocks provide?  Answer:  They provide the extra shroud depth needed for shielded wiring. 
  • Question:  Are terminal blocks included?  Answer:  No, terminal blocks are sold separately. 
  • Question:  Where must IC695ALG704 be located?  Answer:  This module must be located in an RX3i Universal Backplane. 
  • Question:  What kind of CPU does IC695ALG704 require?  Answer:  This module requires an RX3i CPU with firmware version 3.0 or later.
  • Question:  What must be used for configuration?  Answer:  Machine Edition Version 5.0 SP3 Logic Developer-PLC or later must be used for configuration. 
  • Question:  What should I do if my IC695ALG704 is not working properly?  Answer:  Your IC695ALG704 may need repair. 

For more information on the IC695ALG704 4-Channel, Non-Isolated, Voltage/Current, Analog Output Module of the GE Fanuc RX3i Series, please see the Datasheet User-Manual.

Release History

Version

Firmware Revision

Upgrade Kit

Comments

IC695ALG704-AA IC695ALG708-AA

1.06

None

Initial Release

IC695ALG728-AA

1.00

None

Initial Release

IC695ALG704-AB IC695ALG708-AB

1.08

44A753281-G01

 

44A753282-G01

 

IC695ALG728-AB

1.01

44A753283-G01

 

IC695ALG704-BB IC695ALG708-BB

1.08

44A753281-G01

Modified the terminal block detector switch to increase the size of the switch lever. The increased size of the switch lever allows additional tolerance to assure contact with the terminal block actuator.

44A753282-G01

IC695ALG728-BB

1.01

44A753283-G01

IC695ALG704-CB IC695ALG708-CB

1.08

44A753281-G01

Label change only. No change in functionality, performance or compatibility.

44A753282-G01

IC695ALG728-CB

1.01

44A753283-G01

IC695ALG704-DC IC695ALG704CA-DC

IC695ALG708-DC IC695ALG708CA-DC IC695ALG708LT-DC

IC695ALG728-DC IC695ALG728CA-DC

2.00

41G2442-FW01-000-A0

 

41G2443-FW01-000-A0

 

 

41G2444-FW01-000-A0

HW/FW change to address obsolescence and implement EU RoHS compliance 2011/65/EU

 

CA = Conformal Coated version LT = Low Temperature version

 

ST. LOUIS, Feb. 1, 2019 – Emerson today announced it has completed the purchase of Intelligent Platforms from General Electric.

PDF Supply sells used surplus products. PDF Supply is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by PDF Supply come with PDF Supply’s 1-year, 2-year, or 3-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.

Rockwell Disclaimer: The product is used surplus. PDF Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because PDF Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, PDF Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. PDF Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. PDF Supply also makes no representations as to your right to install any such firmware on the product. PDF Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.