GE / IP FANUC Series 90/30 In Stock
IC695ALG312
RX3i ALG312 Analog
SKU 2177011 UPC 0127978499343
All product names, trademarks, brands and logos used on this site are the property of their respective owners. PDF Supply is not an authorized distributor, reseller or representative of the products featured on this website. The depiction, description or sale of products featuring these names, trademarks, brands and logos is for identification purposes only and is not intended to in indicate any affiliation with or authorization by any rights holder.
PDF Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with PDF Supply's 1-year, 2-year, or 3-year warranty.
Other Available Revisions for the IC695ALG312 IC695ALG312-AAIC695ALG312-BAIC695ALG312-CAIC695ALG312-CBIC695ALG312-DBIC695ALG312-EBIC695ALG312-FCIC695ALG312-LT
Common misspellings:
- 1C695ALG312
- IC695A1G312
- IC695ALG3l2
- IC695ALG312
Technical Specifications for IC695ALG312
| Manufacturer | GE Fanuc |
|---|---|
| Series | RX3i PACSystems |
| Part Number | IC695ALG312 |
| Product Type | Thermocouple Input Module |
| Number of Inputs | 12 |
| Internal Power | 3.3V at 400mA and 5V at 300mA |
| Thermocouples Types | J, K, T, E, R, S, B, N, or C |
| Update Rate | 15-120 ms (configurable) |
| Operating Temperature | 0 to 60 degrees Celsius |
| Storage Temperature | -40 to 85 degrees Celsius |
Product Description
The IC695ALG312 is a 12-Channel Isolated Thermocouple Input module from the GE Fanuc RX3i Series. This module provides 12 isolated differential thermocouple input channels. The module must be located in an RX3i Universal Backplane. It requires an RX3i CPU with firmware version 5.5 or later. See specifications for this unit on IC695ALG312's website page.
Technical Specifications
| Module Type: | Isolated Thermocouple Input |
| Number of Inputs: | 12 |
| Internal Power: | 3.3V: 400mA; 5V: 300 mA |
| Number of Slots: | 1 (single slot) |
| Types: | J, K, T, E, R, S, B, N or C |
| Update Rate: | 15 msec to 120 msec (configurable) |
The IC695ALG312 module operates in a temperature range of 0 to 60 degrees Celsius and it has a non-operating or storage temperature range from -40 to 85 degrees Celsius. It tolerates humidity levels of 5 to 95 percent without condensation. It also features a vibration tolerance of 10 to 57 Hertz with a peak displacement of 0.0524 millimeters at 57 to 500 Hertz. This unit comes with an acceleration of 1 g and it is certified for compliance with the JISC0911 and IEC60068-2-6 standards. Additionally, it features 15 g of shock resistance for 11 milliseconds and it complies with the JISC0912 and IEC60068-2-27 standards too. It features 12 isolated thermocouple input channels with different thermocouples including the K, T, N, C, J, E, S, or B types. Every thermocouple features a varied range of temperatures, for example, Type B has a range from 300 to 1820 degrees Celsius, and Type C has a range from 0 to 2315 degrees Celsius.
Technical Information
Specifications
Refer to the PACSystems RX3i System Manual, GFK-2314, for product standards and general specifications.
|
Number of Channels |
6/12 Individually isolated channels |
||
|
Resolution |
11.5-16 bits (see filter table) |
||
|
Measuring method selectable per channel |
Voltage: +/-50mV and +/-150mV Thermocouple types: J, K, T, E, R, S, B, N and C |
||
|
Integration time for 12 channels |
Configurable from 15 msec to 120 msec. |
||
|
Voltage Accuracy over temperature span |
±0.1% of voltage span at 25 °C ±0.25% of span over temperature range |
||
|
Thermocouple Input Types and Ranges |
Thermocouple Type |
Temperature Range |
|
|
Type B |
+300 to +1820 |
||
|
Type C |
0 to +2315 |
||
|
Type E |
-270 to +1000 |
||
|
Type J |
-210 to +1200 |
||
|
Type K |
-250 to +1372 |
||
|
Type N |
-210 to +1300 |
||
|
Type R |
0 to +1768 |
||
|
Type S |
0 to +1768 |
||
|
Type T |
-270 to +400 |
||
|
Voltage Input Ranges |
Input Type |
Voltage Range |
|
|
-50mV to +50mV |
-55.0 mV to +55.0 mV |
||
|
-150mV to +150mV |
-155.0 mV to +155.0 mV |
||
|
Module temperature accuracy for thermocouple inputs over temperature span (2.3, 4, and 4.7 Hz filters), Does not include cold junction compensation or thermocouple tolerances. |
Thermocouple Type & Range |
+25°C |
0°C to +60°C |
|
Type J (-180ï‚°C to +1200ï‚°C) |
±0.6°C |
±2.3°C |
|
|
Type J (-210ï‚°C to -180ï‚°C) |
±0.8°C |
±3.3°C |
|
|
Type N (-160ï‚°C to +1300ï‚°C) |
±1.0°C |
±4.5°C |
|
|
Type N (-210ï‚°C to -160ï‚°C) |
±1.8°C |
±8.0°C |
|
|
Type T (-190ï‚°C to +400ï‚°C) |
±0.9°C |
±4.0°C |
|
|
Type T (-270ï‚°C to -190ï‚°C) |
±6.7°C |
±18.0°C |
|
|
Type K (-200ï‚°C to +1372ï‚°C) |
±1.0°C |
±4.0°C |
|
|
Type K (-250ï‚°C to -200ï‚°C) |
±5.1°C |
±21.0°C |
|
|
Type E (-200ï‚°C to +1000ï‚°C) |
±0.6°C |
±2.5°C |
|
|
Type E (-270ï‚°C to -200ï‚°C) |
±5.3°C |
±14.0°C |
|
|
Type S and R |
±2.8°C |
±11.5°C |
|
|
Type C |
±1.7°C |
±7.0°C |
|
|
Type B |
±3.3°C |
±20.0°C |
|
|
Measurement Units |
Degrees C or F, or Voltage |
||
|
CJC measurement resolution |
0.01° (C or F) for temperatures 0-60°C |
||
|
CJC temperature accuracy |
±1.5°C Typical (0-60°C), ±3.0°C Max (0-60°C) |
||
|
Repeatability |
0.05% of voltage span at a constant temperature over a 30-second period |
||
|
Diagnostics reported to the controller |
User configurable for Over Range, Under Range, High and Low Alarm, High- high and Low-low alarm, Open Circuit Detection, Positive and Negative Rate of Change alarm |
||
|
Channel-to-channel crosstalk |
70 dB minimum |
||
|
Common Mode Rejection |
2.3 Hz filter, 50/60Hz: 100 dB 4 Hz filter, 50Hz: 100 dB 4.7 Hz filter, 60Hz: 100 dB |
||
|
Default or Hold Last State |
Configurable per channel for Default to 0 or Hold Last State |
||
|
Fault Reporting |
Configurable per channel to enable or disable fault reporting for under or over range alarm, open circuit, rate of change alarm. |
||
|
Rate of change |
Configurable per channel to enable/disable and specify positive and negative rate of change alarms. |
||
|
Channel Value Format |
Configurable as 16-bit integer (in a 32-bit field) or 32-bit real number. |
||
|
Backplane Power Requirements |
3.3V IC695ALG306 = 400mA maximum IC695ALG312 = 400mA maximum 5.0V IC695ALG306 = 225mA maximum IC695ALG312 = 425mA maximum |
||
|
Input Impedance |
Voltage: >=500k ohm |
||
|
Power Dissipation within the module |
IC695ALG306 = 2.5W max IC695ALG312 = 3.5W max |
||
|
Isolation Voltage (Field to Backplane and Channel to channel) (CJC inputs are not isolated from the backplane) |
250VAC Continuous 1500VAC 1 minute 2550VDC 1 second |
||
|
Normal Mode Noise Rejection |
2.3 Hz filter, 50Hz/60Hz: 67dB 4 Hz filter, 50Hz/60Hz: 80dB 24 Hz filter, 50Hz/60Hz: 25dB |
||
|
Module Filter settings, update times, rejection and resolution |
Filter Frequency (-3dB frequency) |
Update Time (milliseconds) |
Normal Mode Rejection at 50/60 Hz |
|
2.3 Hz |
120 (130 max) |
67dB @ 50/60 Hz |
|
|
4 Hz |
70 (80 max) |
80dB @ 50 Hz |
|
|
4.7 Hz |
60 (70 max) |
80dB @ 60 Hz |
|
|
24 Hz |
20 (30 max) |
25dB @ 50 Hz |
|
|
28 Hz |
15 (25 max) |
25dB @ 60 Hz |
|
Troubleshooting
Troubleshooting IC695ALG312
Troubleshooting information is available on IC695ALG312's website page; it also includes a datasheet user-manual and a wiring diagram.
Repair your IC695ALG312
PDF Supply can repair your IC695ALG312 in 3-5 business days. And PDF Supply stands by all of its repairs with a 1 year customer satisfaction warranty.
Customer Questions and Answers
- Question: What is an IC695ALG312? Answer: The IC695ALG312 is a 12-Channel Isolated Thermocouple Input module from the GE Fanuc RX3i Series.
- Question: What does IC695ALG312 provide? Answer: This module provides 12 isolated differential thermocouple input channels.
- Question: How are the individual channels congfigured? Answer: Each channel can be individually configured for inputs from:
- Thermocouple types: J, K, T, E, R, S, B, N, or C
- Voltage: +/- 50mV
- Question: Where must IC695ALG312 be located? Answer: This module must be located in an RX3i Universal Backplane.
- Question: With what kind of terminal blocks can IC695ALG312 be used? Answer: This module can be used with a Box-style (IC694TBB032), Extended Box-style (IC694TBB132), Spring-style (IC694TBS032), or Extended Spring-style (IC694TBS132) Terminal Block.
- Question: What do extended terminal blocks provide? Answer: They provide the extra shroud depth needed for shielded wiring.
- Question: What are some of the features of IC695ALG312? Answer:
- Completely software-configurable, no module jumpers to set
- Thermocouple Linearization based on ITS-90
- Supports hot removal and insertion (with system power applied)
- 32-bit IEEE floating point or 16 bit integer (in 32 bit field) input data format selectable per channel
- Temperature units selectable in degrees C and F
- User scaling
- Programmable notch filter from 2.3 Hz to 28 Hz per channel
- Alarm dead band for high alarm, low alarm, high-high alarm, and low-low alarm by channel
- Wire-off (open circuit) condition support for all inputs
- Module fault status reporting (Watchdog, RAM Fail, Flash Fail)
- Module identity and status reporting including LED status indicators
- Supports Cold Junction Compensation (CJC) on Terminal Block (Cold Junction Sensor sold separately)
- User offset for all channels including CJCs
- Supports field upgrade of firmware application code
- Optional CJC enable selections
- Reports CJC temperatures as separate channels in Input Data
- CJC update rate is fixed at 20 Hz
- CJC filter setting fixed with first notch at 10 Hz, and 3dB input attenuation at 4.7 Hz
- Terminal Block detection switch
- Question: What should I do if my IC695ALG312 is not working properly? Answer: Your IC695ALG312 may need repair.
For more information on the IC695ALG312, 12-Channel Isolated Thermocouple Input Module of the GE Fanuc RX3i Series, please see the Datasheet User-Manual.
Release History
|
Version |
Firmware Revision |
Comments |
|
IC695ALG312-FC IC695ALG312CA-FC |
2.00 |
This version of the product is a new HW and FW design to resolve processor obsolescence and comply with EU RoHS 2011/65/EU |
|
IC695ALG306-EB IC695ALG312-EB |
1.02 |
Hardware revision for improved manufacturability. No change in functions, performance or compatibility. |
|
IC695ALG306-DB IC695ALG312-DB |
1.02 |
Hardware revision to address component obsolescence. No change in functionality, performance, or compatibility. |
|
IC695ALG306-CB IC695ALG312-CB |
1.02 |
Improves accuracy of cold junction compensation and eliminates input glitches observed on some units. Also changes dual CJC scanning to revert to scanning a single operational CJC sensor in the event one of them fails instead of assuming 25°C for the failed sensor. Modified Type K Thermocouple low-end range from -270 °C to -250 °C. |
|
IC695ALG306-CA IC695ALG312-CA |
1.00 |
Label change only. No change in functionality, performance or compatibility. |
|
IC695ALG306-BA IC695ALG312-BA |
1.00 |
Modified the terminal block detector switch to increase the size of the switch lever. The increased size of the switch lever allows additional tolerance to assure contact with the terminal block actuator. |
|
IC695ALG306-AA IC695ALG312-AA |
1.00 |
Initial Release |
Common related search terms: BatteryBuy, Configuration, Datasheet, Dimension, Emerson, Fanuc, Firmware, GE, GE-Fanuc, Manual, PDF, PLC, Price, Repair, Specification, Troubleshoot, User-Manual, Wiring,
