1-800-360-6802
[email protected]

GE / IP FANUC Series 90/30 In Stock

World's Largest Warehouse

of GE 90-30, Genius, and RX7i

1-800-360-6802

Mon-Fri 8AM-5PM EST

[email protected]

IC695ALG106

RX3i ALG106 Analog

★ ★ ★ ★ ★ Rated 4.8/5 Based on 10 ratings.

Rate your purchase of the IC695ALG106

SKU 2177234  UPC 0638115013709

All product names, trademarks, brands and logos used on this site are the property of their respective owners. PDF Supply is not an authorized distributor, reseller or representative of the products featured on this website. The depiction, description or sale of products featuring these names, trademarks, brands and logos is for identification purposes only and is not intended to in indicate any affiliation with or authorization by any rights holder.

PDF Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with PDF Supply's 1-year, 2-year, or 3-year warranty.

New

$3127

2 In Stock

✓  2 Year PDF Supply Warranty

*Need a Specific Revision?

Ships .

Surplus New

$2281

Save $846

1 In Stock

✓  3 Year PDF Supply Warranty

*What is Surplus New?

Ships .

Other Available Revisions for the IC695ALG106 IC695ALG106-AAIC695ALG106-BAIC695ALG106-CAIC695ALG106-DAIC695ALG106-EAIC695ALG106-FBIC695ALG106-FCIC695ALG106-LT

Common misspellings:
  • 1C695ALG106
  • IC695A1G106
  • IC695ALGl06
  • IC695ALG1o6
  • IC695ALG106

Product Description

The IC695ALG106 is an 6-Channel, Isolated, Analog Input module from the GE Fanuc RX3i Series. The IC695ALG106 provides 6 isolated input channels.  The module must be located in an RX3i Universal Backplane.  It requires an RX3i CPU firmware version 5.0 or later. See specifications for this unit on IC695ALG106's website page.

Technical Specifications

Module Type: Analog Input
No of Inputs: 6 Isolated Inputs 
Internal Power: 3.3V: 600mA;  5V: 400 mA
Number of Slots:  1 (single slot)
Voltage Range: 0 to 10V, +/-10V, 0 to 5V, +/-5V, 1 to 5V 
Current Range:  0-20 mA, 4-20 mA, +/-20 mA

 

 

Technical Information

Specifications

 

Input Ranges

Current: 0 to 20mA, 4 to 20mA, +/- 20mA  Voltage: +/- 10V, 0 to 10V, +/- 5V, 0 to 5V, 1 to 5V

Power Requirements (from the backplane)

ALG106:     230 mA maximum @ 5.0V +5%  / -2.5%,

320 mA maximum @ 3.3V +5% / -3% ALG112 490 mA maximum @ 5.0V +5% / - 2.5%,

310 mA maximum @ 3.3V +5% / - 3%

Power Dissipation within Module

IC695ALG106: 2.97 watts maximum; with 20mA inputs on all 6 channels IC695ALG112: 4.89  watts  maximum with  20mA inputs on all 12 channels

Thermal Derating

No derating

Resolution

16 bit ADC converted to Floating Point or Integer

Input Data Format

Configurable as floating point IEEE 32 bit or 16-bit integer in a 32-bit field

Filter Options

8Hz, 12Hz, 16Hz, 40Hz, 250Hz, 1000Hz

Input Impedance

>500 Kohm voltage inputs

Current Input Resistance

250 ohms +/- 1%

Open Circuit Detection time

1 second maximum

Overvoltage

+/-35 VDC continuous, maximum

Overcurrent

+/-35mA continuous, maximum

Normal Mode Noise Rejection (dB)

 

At 50Hz

At 60Hz

8 Hz filter

90

75

12 Hz filter

75

80

16 Hz filter

35

75

Common Mode Noise Rejection

100dB minimum @ 50/60 Hz with 8 Hz filter 100dB minimum @ 50/60 Hz  with 12 Hz filter

Channel-Channel DC Crosstalk

-70 dB minimum

Isolation Voltage terminal block to

backplane/chassis and

channel to channel

I-coupler,  transformer isolated

250 VAC continuous/1500 VAC for 1 minute

Analog Step Change Response

The analog input will settle to 0.1% of its final value within 1.7mS for a step change on the input pins of the module. (Any digital filtering is in addition to

this time.)

Digital Filtering Settling Time (milliseconds)

The settling time depends on the configured  filter time.

8 Hz Filter: 127 mS

12 Hz Filter: 67 mS

16 Hz Filter: 56 mS

40 Hz Filter: 21 mS

250 Hz Filter: 3.1 mS

1000 Hz Filter:   0 mS (no digital filtering; analog front-end filter only)

Analog Module Scan Time (milliseconds)

The modules provide a new sample every 1mS, regardless of the digital filtering selected. See Digital Filtering Settling Time for the amount of time

required to have settled  data.

Calibrated Accuracy

0.1             % of range at 25°C

0.2             % of range over entire temperature span

In the presence of severe RF interference (IC 801-3, 10V/M), accuracy may be degraded  by 2.0%  of range.

Calibration Interval

12 months typical to meet accuracy specifications over time. Offset can be applied as a periodic calibration adjustment.

 

Troubleshooting

Troubleshooting IC695ALG106

Troubleshooting information is available on IC695ALG106's website page; it also includes a datasheet user-manual and a wiring diagram.

 

Repair your IC695ALG106

PDF Supply can repair your IC695ALG106 in 3-5 business days. And PDF Supply stands by all of its repairs with a 1 year customer satisfaction warranty.

Customer Questions and Answers

  • Question:  What is an IC695ALG106?  Answer:  The IC695ALG106 is an 6-Channel, Isolated, Analog Input module from the GE Fanuc RX3i Series.
  • Question:   What current and voltage ranges can the IC695ALG106 be configured for?   Answer:
    • Current:  0 to 20 mA, 4 to 20 mA, +/-20 mA
    • Voltage:  +/1 10V, 0 to 10V, +/- 5V, 0 to 5V, 1 to 5V
  • Question:  What are some of the features of the IC695ALG106?   Answer:  
    • Completely software-configurarble, no modular jumpers to set.
    • On-board error checking
    • Open-circuit detection for all voltage and 4-20mA inputs
    • Configurable scalling and offsets per channel
    • High alarm, low alarm, high-high alarm, low-low alarm detection and reporting selectable per channel
  • Question:  Does the IC695ALG106 require external power?   Answer:  If the module is located in an RX3i Universal Backplane, an external source of isolated +24 VDC is required to provide power for the module.
  • Question: What should I do if my IC695ALG106 is not working properly?   Answer:  Your IC695ALG106 may need repair. 

For more information on the IC695ALG106 6-Channel, Isolated, Analog Input Module of the GE Fanuc RX3i Series, please see the Datasheet User-Manual.

Release History

 

 

Version

Firmware Revision

 

Date

 

Description

IC695ALG106-FC

2.01

September 2017

FW update to correct PCI ID value reported to allow use of the ALG106 in remote  PNS001 controlled racks.

IC695ALG106-FB IC695ALG112-FB

2.00

July 2017

New hardware and firmware to address component obsolescence and to obtain EU RoHS compliance

IC695ALG106-EA IC695ALG112-EA

1.00

November 2013

Hardware design updated to address component obsolescence. No change in functionality, performance, or compatibility.

Product labeling and documentation of backplane power consumption revised as a result of UL testing.

IC695ALG106-DA IC695ALG112-DA

1.00

September 2010

Label change only. No change in functionality, performance or compatibility.

IC695ALG106-CA IC695ALG112-CA

1.00

July 2009

Modified the terminal block detector switch to increase the size of the switch lever. The increased size of the switch lever allows additional tolerance to assure contact with the terminal block actuator.

IC695ALG106-BA IC695ALG112-BA

1.00

June 2009

UL approval

IC695ALG106-AA IC695ALG112-AA

1.00

October 2007

Initial Release
ST. LOUIS, Feb. 1, 2019 – Emerson today announced it has completed the purchase of Intelligent Platforms from General Electric.

PDF Supply sells used surplus products. PDF Supply is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by PDF Supply come with PDF Supply’s 1-year, 2-year, or 3-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.

Rockwell Disclaimer: The product is used surplus. PDF Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because PDF Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, PDF Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. PDF Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. PDF Supply also makes no representations as to your right to install any such firmware on the product. PDF Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.