GE / IP FANUC Series 90/30 In Stock
IC694MDL635
RX3i MDL635 Digital I/O
SKU 2176434 UPC 0594995012723
All product names, trademarks, brands and logos used on this site are the property of their respective owners. PDF Supply is not an authorized distributor, reseller or representative of the products featured on this website. The depiction, description or sale of products featuring these names, trademarks, brands and logos is for identification purposes only and is not intended to in indicate any affiliation with or authorization by any rights holder.
PDF Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with PDF Supply's 1-year, 2-year, or 3-year warranty.
Other Available Revisions for the IC694MDL635 IC694MDL635AIC694MDL635BIC694MDL635CIC694MDL635-LT
Common misspellings:
- 1C694MDL635
- IC69AMDL635
- IC694MD1635
- IC694MDL635
Product Description
The IC694MDL635 is a 16-Point, 125 Volt DC, Positive/Negative Logic, Input module from the GE Fanuc RX3i Series. This module provides 16 input points in 1 group with a common power input terminal. See specifications for this unit on IC694MDL635's website page.
Technical Specifications
| Rated Voltage: | 125 volts DC |
| # of Inputs: | 16 (1 group) |
| Freq: | N/A |
| Input Current: | 1.97 mA |
| Input Voltage Range: | 0 to +150VDC |
| Power Consumption: | 80 mA from 5V bus, 31.5 mA from user supply |
Technical Information
Specifications:
|
Rated Voltage |
125 volts DC |
|
Input Voltage Range |
0 to +150 volts DC |
|
Inputs per Module* |
16 (one group with a single common) |
|
Isolation: Field to Backplane (optical) and to frame ground |
250 VAC continuous; 1500 VAC for one minute |
|
Input Current |
1.97mA (typical) at rated voltage |
|
Input Characteristics |
|
|
On–state Voltage |
90 to 150 volts DC |
|
Off–state Voltage |
0 to +30 volts DC |
|
On–state Current |
1.41mA minimum |
|
Off–state Current |
0.46mA maximum |
|
On response Time |
8ms typical |
|
Off response Time |
8ms typical |
|
Power Consumption: 5V |
80mA (all inputs on) from 5 volt bus on backplane |
|
Power Consumption: 125V |
31.5mA from user supplied power (all inputs ON at 125VDC) |
Troubleshooting
Troubleshooting IC694MDL635
Troubleshooting information is available on IC694MDL635's website page; it also includes a datasheet user-manual and a wiring diagram.
Repair your IC694MDL635
PDF Supply can repair your IC694MDL635 in 3-5 business days. And PDF Supply stands by all of its repairs with a 1 year customer satisfaction warranty.
Customer Questions and Answers
- Question: What is an IC694MDL635? Answer: The IC694MDL635 is a 16-Point, Positive/Negative Logic, 125 VDC, Input module from the GE Fanuc RX3i Series.
- Question: What does IC694MDL635 provide? Answer: This module provides 16 input points in 1 group with a common power input terminal.
- Question: How can the module be wired? Answer: This input module can be wired for either positive or negative logic.
- Question: With what are the input characteristics compatible? Answer: The input characteristics are compatible with a wide range of input devices, such as pushbuttons, limit switches, and electronic proximity switches.
- Question: Current into an input point results in what? Answer: Current into an input point results in a logic 1 in the input status table (%I).
- Question: By what power do field devices operate? Answer: Power to operate field devices must be supplied by the user.
- Question: Sixteen green LEDs indicate what? Answer: Sixteen green LEDs indicate the ON/OFF status of points 1 through 16.
- Question: The red bands on the label let you know what? Answer: They let you know that IC694MDL635 is a high-voltage module.
- Question: Into what slot can IC694MDL635 be installed? Answer: This module can be installed in any I/O slot of an RX3i system.
- Question: What should I do if my IC694MDL635 is not working properly? Answer: Your IC694MDL635 may need repair.
For more information on the IC694MDL635 16-Point, Positive/Negative Logic, 125 VDC, Input Module of the GE Fanuc RX3i Series, please see the Datasheet User-Manual.
Release History
|
Release |
Comments |
|
IC693MDL635C |
Change in fab color from Green to Blue. No change in form-fit-functionality. |
|
IC694MDL635C |
Updated modules are RoHS converted product with applicable exemptions |
|
IC694MDL635B IC693MDL635B |
Adds UL508 compliance. This change does not affect module features, operation or compatibility. |
|
IC694MDL635A IC693MDL635A |
Initial release. |
Common related search terms: BatteryBuy, Configuration, Datasheet, Dimension, Emerson, Fanuc, Firmware, GE, GE-Fanuc, Manual, PDF, PLC, Price, Repair, Specification, Troubleshoot, User-Manual, Wiring,
