1-800-360-6802
[email protected]

GE / IP FANUC Series 90/30 In Stock

World's Largest Warehouse

of GE 90-30, Genius, and RX7i

1-800-360-6802

Mon-Fri 8AM-5PM EST

[email protected]

IC694MDL632-Emerson

★★★★★Rated 4.5/5 Based on 9 ratings.

Rate your purchase of the IC694MDL632

SKU 2173014  UPC 0363864146216

All product names, trademarks, brands and logos used on this site are the property of their respective owners. PDF Supply is not an authorized distributor, reseller or representative of the products featured on this website. The depiction, description or sale of products featuring these names, trademarks, brands and logos is for identification purposes only and is not intended to indicate any affiliation with or authorization by any rights holder.

Product Description

The IC694MDL632 is a Discrete Input, 125 Volt DC, Positive/Negative, 8- Point Module by GE Fanuc for the PACSystems RX3i series PLCs. It has 8 inputs divided in two groups of four points. Each of those groups can be configured for either positive or negative logic. Each group has a separate common, which are not connected inside the module. The maximum number of inputs on simultaneously is dependent on ambient temperature. See manual for specifics.

Current into an input point results in a logic 1 in the input status table (%I). The module’s input characteristics are fully compatible with a number of input devices (e.g., pushbuttons, limit switches, and electronic proximity switches). User-supplied power is necessary to operate field devices. The IC694MDL632 is equipped with green LEDs (8) that indicate the ON/OFF status of points 1-8. Red bands on the label are used to warn the user of high voltage. This module can be used in any Rx3i I/O slot. Power consumption is 40mA from the 5V bus on the backplane and 36mA from the user input supply with all inputs ON. 

Technical Specifications

Rated Voltage: 125 volts DC
# of Inputs: 8 (2 groups of 4)
Freq: N/A
Input Current: 4.5 mA
Input Voltage Range:   0 to +150VDC
Power Consumption:   40 mA from 5V bus, 36 mA from user supply 

 

 

Part Number: IC694MDL632 / ic694mdl632
Mfr/Brand Name: GE Automation
Mfr Number: IC694MDL632 / ic694mdl632
Type: 125 volt DC POS/NEG Logic, Input Module, 8 points

ST. LOUIS, Feb. 1, 2019 – Emerson today announced it has completed the purchase of Intelligent Platforms from General Electric.

PDF Supply sells used surplus products. PDF Supply is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by PDF Supply come with PDF Supply’s 1-year, 2-year, or 3-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.

Rockwell Disclaimer: The product is used surplus. PDF Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because PDF Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, PDF Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. PDF Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. PDF Supply also makes no representations as to your right to install any such firmware on the product. PDF Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.