GE / IP FANUC Series 90/30 In Stock
IC694MDL632
RX3i MDL632 Digital I/O
SKU 2173014 UPC 0363864146216
All product names, trademarks, brands and logos used on this site are the property of their respective owners. PDF Supply is not an authorized distributor, reseller or representative of the products featured on this website. The depiction, description or sale of products featuring these names, trademarks, brands and logos is for identification purposes only and is not intended to in indicate any affiliation with or authorization by any rights holder.
PDF Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with PDF Supply's 1-year, 2-year, or 3-year warranty.
Other Available Revisions for the IC694MDL632 IC694MDL632AIC694MDL632-LT
Common misspellings:
- 1C694MDL632
- IC69AMDL632
- IC694MD1632
- IC694MDL632
Product Description
The IC694MDL632 is a Discrete Input, 125 Volt DC, Positive/Negative, 8- Point Module by GE Fanuc for the PACSystems RX3i series PLCs. It has 8 inputs divided in two groups of four points. Each of those groups can be configured for either positive or negative logic. Each group has a separate common, which are not connected inside the module. The maximum number of inputs on simultaneously is dependent on ambient temperature. See manual for specifics.
Current into an input point results in a logic 1 in the input status table (%I). The module’s input characteristics are fully compatible with a number of input devices (e.g., pushbuttons, limit switches, and electronic proximity switches). User-supplied power is necessary to operate field devices. The IC694MDL632 is equipped with green LEDs (8) that indicate the ON/OFF status of points 1-8. Red bands on the label are used to warn the user of high voltage. This module can be used in any Rx3i I/O slot. Power consumption is 40mA from the 5V bus on the backplane and 36mA from the user input supply with all inputs ON.
Technical Specifications
| Rated Voltage: | 125 volts DC |
| # of Inputs: | 8 (2 groups of 4) |
| Freq: | N/A |
| Input Current: | 4.5 mA |
| Input Voltage Range: | 0 to +150VDC |
| Power Consumption: | 40 mA from 5V bus, 36 mA from user supply |
Technical Information
Specifications:
|
Rated Voltage |
125 Vdc (Positive or Negative Logic) |
|
Input Voltage Range |
0 to +150 Vdc |
|
Inputs per Module |
8 (two groups of four inputs) Maximum number of inputs on at the same time depends on ambient temperature (Figure 141). |
|
Isolation: |
|
|
Field to Backplane (optical) and to frame ground |
250 Vac continuous; 1500 Vac for one minute |
|
Group to Group |
250 Vac continuous; 1500 Vac for one minute |
|
Input Current |
4.5 mA typical |
|
Input Characteristics |
|
|
On–state Voltage |
90 to 150 Vdc |
|
Off–state Voltage |
0 to 30 Vdc |
|
On–state Current |
3.1 mA |
|
Off–state Current |
1.1 mA maximum |
|
On response Time |
7 ms typical |
|
Off response Time |
7 ms typical |
|
Power Consumption |
40 mA from the 5 V bus on the backplane 36 mA (typical) from user input supply (all inputs ON) |
Troubleshooting
Troubleshooting IC694MDL632
Troubleshooting information is available on IC694MDL632's website page; it also includes a datasheet user-manual and a wiring diagram.
Repair your IC694MDL632
PDF Supply can repair your IC694MDL632 in 3-5 business days. And PDF Supply stands by all of its repairs with a 1 year customer satisfaction warranty.
Customer Questions and Answers
- Question: What is an IC694MDL632? Answer: The IC694MDL632 is an 8-Point, Positive/Negative Logic, 125 VDC, Input module from the GE Fanuc RX3i Series.
- Question: What does IC694MDL632 provide? Answer: This module provides 8 input points in 2 groups of 4 points in each group.
- Question: How can the groups be wired? Answer: Each group can be wired for either positive or negative logic.
- Question: With what are the input characteristics compatible? Answer: The input characteristics are compatible with a wide range of input devices, such as pushbuttons, limit switches, and electronic proximity switches.
- Question: Current into an input point results in what? Answer: Current into an input point results in a logic 1 in the input status table (%I).
- Question: By what power do field devices operate? Answer: Power to operate field devices must be supplied by the user.
- Question: Eight green LEDs indicate what? Answer: Eight green LEDs indicate the ON/OFF status of points 1 through 8.
- Question: The red bands on the label let you know what? Answer: They let you know that IC694MDL632 is a high-voltage module.
- Question: Into what slot can IC694MDL632 be installed? Answer: This module can be installed in any I/O slot of an RX3i system.
- Question: What should I do if my IC694MDL632 is not working properly? Answer: Your IC694MDL632 may need repair.
For more information on the IC694MDL632 8-Point, Positive/Negative Logic, 125 VDC, Input Module of the GE Fanuc RX3i Series, please see the Datasheet User-Manual.
Common related search terms: BatteryBuy, Configuration, Datasheet, Dimension, Emerson, Fanuc, Firmware, GE, GE-Fanuc, Manual, PDF, PLC, Price, Repair, Specification, Troubleshoot, User-Manual, Wiring,
