GE / IP FANUC Series 90/30 In Stock
IC694MDL390
RX3i MDL390 Digital I/O
SKU 2176359 UPC 0362177932295
All product names, trademarks, brands and logos used on this site are the property of their respective owners. PDF Supply is not an authorized distributor, reseller or representative of the products featured on this website. The depiction, description or sale of products featuring these names, trademarks, brands and logos is for identification purposes only and is not intended to in indicate any affiliation with or authorization by any rights holder.
PDF Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with PDF Supply's 1-year, 2-year, or 3-year warranty.
Other Available Revisions for the IC694MDL390 IC694MDL390AIC694MDL390-LT
Common misspellings:
- 1C694MDL390
- IC69AMDL390
- IC694MD1390
- IC694MDL39o
- IC694MDL390
Product Description
The IC694MDL390 is a GE Fanuc 120/240 VAC, 2 Amp, 5-Point Isolated Output Module for the Rx3i PACSystem. It can be used to replace the IC697MDL341 discrete output module from series 90-70 PLCs. This particular module has five isolated outputs (versus the previous version’s 12 individually isolated outputs). The commons are not connected inside the module, and the output circuits can be used on different phases of the AC supply or powered from the same supply. User-supplied AC Power is required to operate the output-connected loads. AC power is the singular option as DC power is not compatible.
The IC694MDL390 module is equipped with individual outputs with 3 amp fuses. Furthermore, the RC snubber helps to prevent electrical noise that could occur on the line. A wide variety of incandescent and inductive loads can be handled by the IC694MDL390. The IC694MDL390 module has five LEDs that monitor the status of outputs. A red LED will turn ON if an output circuit fuse is faulty. Red bands situated on the label indicate high-voltage. Installation of this module is suitable for any I/O slot in an RX3i system. It should be configured as an 8-point output module with programs that reference the five least significant bits. Max load current is dependent on ambient temps as noted in the manual. Inrush current is 25 amps max for one cycle. Minimum load current is 100mA. Power consumption runs 110mA with all outputs ON from a 5V bus on the backplane.
Technical Specifications
| Rated Voltage: | 120/240 volt AC |
| # of Outputs: | 5 (isolated) |
| Freq: | 50/60 Hz |
| Output Current: | 2 Amps max |
| Output Voltage Range: | 85 to 264 VAC |
| Power Consumption: | 110 mA from 5V bus |
Technical Information
Specifications:
|
Rated Voltage |
120/240 V ac |
|
Output Voltage Range |
85 to 264Vac, 50/60 Hz |
|
Outputs per Module |
5 (each output isolated from the others) |
|
Isolation: |
|
|
Field to Backplane (optical) and to Frame Ground |
250 V ac continuous; 1500 V ac for 1 minute |
|
Point to Point |
250 V ac continuous; 1500 V ac for 1 minute |
|
Output Current |
2 Amps maximum per point 5 Amps maximum per module at 45°C (113°F) 2 Amps maximum per module at 60°C (140°F) Maximum load current depends on ambient temperature as displayed in Figure 186. |
|
Output Characteristics |
|
|
Inrush Current |
25 Amps maximum for one cycle |
|
Minimum Load Current |
100mA |
|
Output Voltage Drop |
1.5 volts maximum |
|
Output Leakage Current |
3mA maximum at 120 V ac |
|
|
6mA maximum at 240 V ac |
|
On Response Time |
1ms maximum |
|
Off Response Time |
1/2 cycle maximum |
|
Power Consumption |
110mA (all outputs on) from 5Vdc bus on backplane |
|
Fuses (quantity 5) |
3 Amps, part number 44A724627-111. Refer to Module Fuse List, Section 2.6.4.11 for more information. |
Troubleshooting
Troubleshooting IC694MDL390
Troubleshooting information is available on IC694MDL390’s website page; it also includes a datasheet user-manual and a wiring diagram.
Repair your IC694MDL390
PDF Supply can repair your IC694MDL390 in 3-5 business days. And PDF Supply stands by all of its repairs with a 1 year customer satisfaction warranty.
Customer Questions and Answers
- Question: What is an IC694MDL390? Answer: The IC694MDL390 is a 120/240 VAC, 5-Point Isolated Output module. This module provides 5 isolated output points, each with a separate common. Outputs are individually fused with a 3 Amp fuse. These output points can be used on different phases of the AC supply or they can be powered from the same supply.
- Question: What does a RC snubber do for this module? Answer: It protects each output against transient electrical noise on the power line.
- Question: Where does the power come from to power the loads? Answer: To operate the loads that are connected to the outputs, external AC power must be supplied by the user.
- Question: What do the individual numbered LED lights mean? Answer: Individual numbered LEDs show the ON/OFF status of each output point.
- Question: What does the red LED (F) light mean? Answer: The red LED (F) turns ON if an output fuse blows.
- Question: Into what can the IC694MDL390 be installed? Answer: The IC694MDL390 can be installed in any I/O slot in an RX3i system.
- Question: What should I do if my module is not working? Answer: If your IC694MDL390 is not working, then your product may need repair.
For more information on the IC694MDL390 Output Module of the GE RX3i Series, please see the Datasheet Manual.
Common related search terms: BatteryBuy, Configuration, Datasheet, Dimension, Emerson, Fanuc, Firmware, GE, GE-Fanuc, Manual, PDF, PLC, Price, Repair, Specification, Troubleshoot, User-Manual, Wiring,
