1-800-360-6802
[email protected]

GE / IP FANUC Series 90/30 In Stock

World's Largest Warehouse

of GE 90-30, Genius, and RX7i

1-800-360-6802

Mon-Fri 8AM-5PM EST

[email protected]

IC694MDL330

RX3i MDL330 Digital I/O

★ ★ ★ ★ ★ Rated 4.8/5 Based on 11 ratings.

Rate your purchase of the IC694MDL330

SKU 2172424  UPC 01832494869010

All product names, trademarks, brands and logos used on this site are the property of their respective owners. PDF Supply is not an authorized distributor, reseller or representative of the products featured on this website. The depiction, description or sale of products featuring these names, trademarks, brands and logos is for identification purposes only and is not intended to in indicate any affiliation with or authorization by any rights holder.

Request a Quote for IC694MDL330

PDF Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with PDF Supply's 1-year, 2-year, or 3-year warranty.

New

$660

5 In Stock

✓  2 Year PDF Supply Warranty

*Need a Specific Revision?

Ships .

New Surplus

$502

Save $158

6 In Stock

✓  3 Year PDF Supply Warranty

*What is New Surplus?

Ships .

Reman

$330

Save $330

22 In Stock

✓  2 Year PDF Supply Warranty

*What is Remanufactured?

Ships .

Repair Service

$264

Save $396

5-10 Days

✓  2 Year PDF Supply Warranty

*What is Fast Repair?

Repair Completion:
5-10 Days

Other Available Revisions for the IC694MDL330 IC694MDL330AIC694MDL330-LT

Common misspellings:
  • 1C694MDL330
  • IC69AMDL330
  • IC694MD1330
  • IC694MDL33o
  • IC694MDL330

Technical Specifications for IC694MDL330

ManufacturerGE Fanuc
SeriesRX3i PACSystems
Part NumberIC694MDL330
Product TypeOutput Module
Rated Voltage120/240V AC
Current Output2 A
Output Voltage Range85 to 264V AC
Frequency50/60 Hz
Inrush Output Current20 A per cycle
Output Points8 (2 groups of 4)

Product Description

The IC694MDL330 by GE Fanuc is a 120/240 Volt AC, 2 Amp Output Module. It provides eight output points separated into two groups of four with each group having its own common. The two commons for the two separate groups are not connected inside the module. Each group can operate on a different phase of the AC supply. There is also a 5 amp fuse protecting the two groups from power failure. Additionally, an RC snubber helps to eliminate electrical noises that may originate from the power line.

The IC694MDL330 module has a response time of 1 ms ON and ½ cycle OFF. This module requires the use of user-supplied AC power. DC power is not an option. Indicator LEDs located on the back of the IC694MDL330 module alert the user to output performance and blown fuses. In addition, there are two red bands that remind the user that the IC694MDL330 module is high voltage. This output module works in any Rx3i system I/O slot. Its power consumption is 160mA with all outputs powered ON.

Technical Specifications

Rated Voltage: 120/240 volt AC 
# of Outputs: 8 (2 groups of 4)
Freq: 50/60 Hz
Output Current: 20 Amps max
Output Voltage Range:  85 to 264 VAC
Power Consumption: 160 mA from 5V bus 

 

 

The IC694MDL330 Output Module has been manufactured by GE Fanuc Automation as part of the RX3i PACSystems product series. It operates on a voltage rating of 120 to 240 Volts AC, an output current rating of 2 Amps, and a voltage range from 85 to 264 Volts AC at 50 to 60 Hertz frequency. The inrush output current rating of this unit is 20 Amps at maximum for 1 cycle. It features 8 output points which are arranged in 2 isolated groups with each containing 4 output points. Each group has a distinct common, but the commons are not part of the module. These 2 output groups are powered by 1 source of power, and the groups can also all be used on separate phases of the AC power supply. The IC694MDL330 Output Module by GE Fanuc has AC power that is supplied by the operators for loads linked to outputs. This module only operates with an AC power supply, and it cannot operate on a DC power supply.

The 2 groups of outputs on the GE Fanuc Automation IC694MDL330 Output Module are protected by a 5-Amps fuse for every common. Additionally, each output features an RC snubber that is used for the protection of the output when there is transient electrical noise. This output module operates in environments with a temperature rating of 0 to 60 degrees Celsius and it can be stored safely in temperature range from -40 to 85 degrees Celsius. The IC694MDL330 Output Module can also tolerate a non-condensing humidity level of 5 to 95 percent, a vibrational frequency rating of 10 to 57 Hertz with peak displacement of 0.006 inches and it is also compliant with the JISC0911 and IEC60068-2-6 standards.

Technical Information

Specifications:

Rated Voltage

120/240 V ac

Output Voltage Range

85 to 264Vac, 50/60  Hz

Outputs per Module

8 (two groups of four outputs  each)

Isolation:

 

Field to Backplane (optical) and to Frame Ground

250 V ac continuous; 1500 V ac for 1 minute

Group to Group

250 V ac continuous; 1500 V ac for 1 minute

Output Current

2 Amp  maximum per point

4 Amps maximum per group at 40°C (104°F) Maximum load current depends on  ambient temperature  as  displayed in Figure 178.

Output  Characteristics

 

Inrush Current

20 Amps maximum for one cycle

Minimum Load Current

100mA

Output  Voltage Drop

1.5  volts maximum

Output Leakage Current

3mA maximum at 120 V ac 6mA maximum at 240 V ac

On  Response Time

1ms maximum

Off  Response Time

1/2 cycle maximum

Power Consumption

160mA (all outputs on) from 5 Vdc bus on backplane

Fuses (quantity 2)

5 Amp, part number 44A724627-114. Refer to Module Fuse List, Section 2.6.4.11 for more information.

Troubleshooting

Troubleshooting IC694MDL330

Troubleshooting information is available on IC694MDL330's website page; it also includes a datasheet user-manual and a wiring diagram.

 

Repair your IC694MDL330

PDF Supply can repair your IC694MDL330 in 3-5 business days. And PDF Supply stands by all of its repairs with a 1 year customer satisfaction warranty.

Customer Questions and Answers

  • Question:  What is an IC694MDL330?  Answer:  The IC694MDL330 is an 8-Point, 2 Amp, 120/240 Volt AC, Output module from the GE Fanuc RX3i Series. 
  • Question:  What does IC694MDL330 provide? Answer:  This module provides 8 output points in 2 isolated groups of 4 points.
  • Question:  How many commons are there?  Answer:  Each group has a separate common and the 2 commons are not tied together inside the module.
  • Question:  Where can the groups be used on?  Answer:  Used on different phases of the AC supply OR they can be powered from the same supply.
  • Question:  What power to operate loads is connected to outputs?  Answer:  AC Power must be user supplied.
  • Question:  The IC694MDL330 requires what power?  Answer:  This module requires an AC power source. It can NOT be used with a DC power source.
  • Question:  Each group is protected with what?  Answer:  Each group is protected with a 5 amp fuse for each common. 
  • Question:  What does an RC snubber do for each output?  Answer:  It protects against transient electrical noise on the power line.
  • Question:  IC694MDL330 provides a high degree of inrush current so the outputs can do what?  Answer:  This module provides 10 times the rated current so the outputs can control a wide range of inductive and incandescent loads.
  • Question:  Individual numbered LEDs show what?  Answer:  They show the ON/OFF status of each output point.
  • Question:  The red LED (F) turns ON when what happens?  Answer:  It turns ON if an output fuse blows.
  • Question:  The red bands on the label show what?  Answer:  They show that IC694MDL330 is a high-voltage module.
  • Question:  Into what slot can IC694MDL330 be installed?  Answer:  This module can be installed into any I/O of an RX3i system.
  • Question:  What should I do if my IC694MDL330 is not working properly?  Answer:  Your IC694MDL330 may need repair. 

For more information on the IC694MDL330 8-Point, 2 Amp, 120/240 Volt AC, Output Module of the GE Fanuc RX3i Series, please see the Datasheet User-Manual. 

ST. LOUIS, Feb. 1, 2019 – Emerson today announced it has completed the purchase of Intelligent Platforms from General Electric.

PDF Supply sells used surplus products. PDF Supply is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by PDF Supply come with PDF Supply’s 1-year, 2-year, or 3-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.

Rockwell Disclaimer: The product is used surplus. PDF Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because PDF Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, PDF Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. PDF Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. PDF Supply also makes no representations as to your right to install any such firmware on the product. PDF Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.