GE / IP FANUC Series 90/30 In Stock
IC694MDL310
RX3i MDL310 Digital I/O
SKU 2172011 UPC 0559469404756
All product names, trademarks, brands and logos used on this site are the property of their respective owners. PDF Supply is not an authorized distributor, reseller or representative of the products featured on this website. The depiction, description or sale of products featuring these names, trademarks, brands and logos is for identification purposes only and is not intended to in indicate any affiliation with or authorization by any rights holder.
PDF Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with PDF Supply's 1-year, 2-year, or 3-year warranty.
Other Available Revisions for the IC694MDL310 IC694MDL310AIC694MDL310BIC694MDL310-LT
Common misspellings:
- 1C694MDL310
- IC69AMDL310
- IC694MD1310
- IC694MDL3l0
- IC694MDL31o
- IC694MDL310
Product Description
The GE Fanuc IC694MDL310 is a 120 VAC, 0.5 amp output module with 12 output points divided into two groups. Each group has a separate common. The output module groups can be powered from the same supply and are protected from power supply failure by a 3 amp fuse. Additionally, each output has an RC snubber that assists in the elimination of electrical noise on the power line.
The IC694MDL310 output module provides a high degree current so that every output can control a wide variety of loads. It only works with an AC power source and is not compatible with DC power. AC power to operate loads connected to outputs must be supplied by the user. LEDs are located on the front side of the module and alert the user to the number of outputs in use. A red LED (F) indicates a blown fuse. Red bands alert the user that the IC694MDL310 is a high voltage module. The IC694MDL310 module is specifically designed for use with the Rx3i system and can be installed in any Rx3i I/O slots. Its power consumption is 210mA when all outputs are ON.
Technical Specifications
| Rated Voltage: | 120 volt AC |
| # of Outputs: | 12 (2 groups of 6) |
| Freq: | 50/60 Hz |
| Output Current: | 5 Amps max |
| Output Voltage Range: | 85 to 132 VAC |
| Power Consumption: | 210 mA from 5V bus |
Technical Information
Specifications:
|
Rated Voltage |
120 V ac |
|
Output Voltage Range |
85Vac to 132Vac, 50/60 Hz |
|
Outputs per Module |
12 (two groups of six outputs each) |
|
Isolation: |
|
|
Field to Backplane (optical) and to Frame Ground |
250 V ac continuous; 1500 V ac for 1 minute |
|
Group to Group |
250 V ac continuous; 1500 V ac for 1 minute |
|
Output Current |
0.5 Amp maximum per point 1 Amp maximum per group at 60°C (140°F) 2 Amps maximum per group at 50°C (122°F) Maximum load current depends on ambient temperature as displayed in Figure 175. |
|
Output Characteristics |
|
|
Inrush Current |
5 Amps maximum for one cycle |
|
Minimum Load Current |
50mA |
|
Output Voltage Drop |
1.5 volts maximum |
|
Output Leakage Current |
3mA maximum at 120 V ac |
|
On Response Time |
1ms maximum |
|
Off Response Time |
1/2 cycle maximum |
|
Power Consumption |
210mA (all outputs on) from 5Vdc bus on backplane |
|
Fuses (quantity 2) |
3 Amps, part number 44A724627-111. Refer to Module Fuse List, Section 2.6.4.11 for more information. |
Troubleshooting
Troubleshooting IC694MDL310
Troubleshooting information is available on IC694MDL310’s website page; it also includes a datasheet user-manual and a wiring diagram.
Repair your IC694MDL310
PDF Supply can repair your IC694MDL310 in 3-5 business days. And PDF Supply stands by all of its repairs with a 1 year customer satisfaction warranty.
Customer Questions and Answers
- Question: What is an IC694MDL310? Answer: The IC694MDL310 is a 120VAC, 12-Point Output module. This module provides 12 output points in 2 isolated groups of 6 points. Each group is protected by a 3 Amp fuse. These output points can be used on different phases of the AC supply or they can be powered from the same supply.
- Question: What does a RC snubber do for this module? Answer: It protects each output against transient electrical noise on the power line.
- Question: With what Terminal Blocks can the IC694MDL310 be used? Answer: The IC694MDL250 can be used with a Box-style (IC694TBB032), Extended Box-style (IC694TBB132), Spring-style (IC694TBS032), or Extended Spring-style (IC694TBS132) Terminal Block.
- Question: What do Extended terminal blocks do? Answer: They provide the extra shroud depth typically needed for field wiring to AC devices.
- Question: What do the individual numbered LED lights mean? Answer: Individual numbered LEDs show the ON/OFF status of each output point.
- Question: What does the red LED (F) light mean? Answer: The red LED (F) turns ON if an output fuse blows.
- Question: Into what can the IC694MDL310 be installed? Answer: The IC694MDL310 can be installed in any I/O slot in an RX3i system.
- Question: What should I do if my module is not working? Answer: If your IC694MDL310 is not working, then your product may need repair.
For more information on the IC694MDL310 Output Module of the GE RX3i Series, please see the Datasheet Manual.
Common related search terms: BatteryBuy, Configuration, Datasheet, Dimension, Emerson, Fanuc, Firmware, GE, GE-Fanuc, Manual, PDF, PLC, Price, Repair, Specification, Troubleshoot, User-Manual, Wiring,
