GE / IP FANUC Series 90/30 In Stock
IC694MDL260
RX3i MDL260 Digital I/O
SKU 2177021 UPC 023961662223
All product names, trademarks, brands and logos used on this site are the property of their respective owners. PDF Supply is not an authorized distributor, reseller or representative of the products featured on this website. The depiction, description or sale of products featuring these names, trademarks, brands and logos is for identification purposes only and is not intended to in indicate any affiliation with or authorization by any rights holder.
PDF Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with PDF Supply's 1-year, 2-year, or 3-year warranty.
Other Available Revisions for the IC694MDL260 IC694MDL260-AAIC694MDL260-LT
Common misspellings:
- 1C694MDL260
- IC69AMDL260
- IC694MD1260
- IC694MDL26o
- IC694MDL260
Product Description
The GE Fanuc IC694MDL260 is a 32-point Input Module for the Rx3i PACSystem. The 120 VAC module is equipped with 32 discrete input points that are arranged in four isolated groups of eight. Isolation is demonstrated between the four input groups, and all inputs within a group are referenced to the same user common connection. The IC694MDL260 module can be used terminal blocks, including: box-style (IC694TBB032), extended box-style (IC694TBB132), spring-style (IC694TBS032), or extended spring-style (IC694TBS132). Extended blocks allow added shroud depth generally necessary for field wiring to AC devices. Note: The terminal block is ordered separately.
Input filter times are set from the programmer using assigned output data references. Individually-numbered LEDs relay the ON/OFF status of points 1-32. The red/green TB LED is green when the removable terminal block is safely locked in place. It shows red when the block is not properly locked. The module also sends a status message to the RX3i CPU. Red bands on the label warn the user that the IC694MDL260 is a high-voltage module. This module can be installed in any I/O slot in an RX3i system. It should be used with an RX3i CPU (3.50 release or greater) and is not compatible with a Series 90-30 PLC CPU. The IC694MDL260 has a rated voltage of 120 volts AC with an input voltage range of 0 to 132 VAC (or 47-63Hz). Input filter times are 20ms to 254ms in 20ms increments sent from the CPU. Input current is 7.0 mA per point at rated voltage typically. Power consumption is 220 mA at 5VDC with all inputs ON.
Technical Specifications
| Rated Voltage: | 120 volt AC |
| # of Inputs: | 32 (4 isolated groups of 8) |
| Freq: | 50/60 Hz |
| Input Current: | 7 mA at rated voltage |
| Input Voltage Range: | 0 to 132 VAC |
| Power Consumption: | 220 mA from 5V bus |
Technical Information
Specifications:
|
Rated Voltage |
120 Vac |
|
Input Voltage Range |
0 to 132 Vac (47 to 63Hz) |
|
Inputs per Module |
32 (four isolated groups of 8 inputs) |
|
Input Filter Times |
20 to 2540ms in 20 ms increments. Sent from CPU. |
|
Input Current |
7.0 mA per point (typical) at rated voltage |
|
Isolation: |
|
|
Field to Backplane (optical) |
264 Vac continuous; 1500 V ac for one minute |
|
Group to Group |
264 Vac continuous; 1500 V ac for one minute |
|
Thermal Derating |
Refer to Figure 138. |
|
Power Consumption |
220 mA at 5 Vdc with all inputs on |
|
Diagnostics |
Terminal block presence reported to RX3i CPU |
|
Input Characteristics |
|
|
On–state Voltage |
70 to 132 Vac |
|
Off–state Voltage |
0 to 20 Vac |
|
On–state Current |
5 mA minimum |
|
Off–state Current |
2.5 mA maximum |
|
On/Off response Time |
+0-1 AC cycles for filter times up to 840 ms +1-2 AC cycles for filter times of 840 to 1600 ms +2-3 AC cycles for filter times of 1600 to 1920 ms +3-4 AC cycles for filter times of 1920 ms or more |
Troubleshooting
Troubleshooting IC694MDL260
Troubleshooting information is available on IC694MDL260’s website page; it also includes a datasheet user-manual and a wiring diagram.
Repair your IC694MDL260
PDF Supply can repair your IC694MDL260 in 3-5 business days. And PDF Supply stands by all of its repairs with a 1 year customer satisfaction warranty.
IC693MDL260 System Configuration Mismatch
Description
Issues with the IC693MDL260 or IC694MDL260 modules, such as system configuration mismatch errors, or the inability to read the inputs, are often caused by the DIP switch settings on the back of the module.
Resolution
The DIP switch settings must match the software configuration settings for the Hardware. If Input Filters are enabled, move both DIP switches to the right. Some manuals may show that the bottom switch is Not Used; however, it may need to be put to the right to avoid issues.
Customer Questions and Answers
- Question: What is an IC694MDL260? Answer: The IC694MDL260 is a 120VAC 32-Point Grouped Input module. This module provides 32 isolated input points. These input points are arranged in 4 isolated groups of 8 inputs.
- Question: With what Terminal Blocks can the IC694MDL260 be used? Answer: The IC694MDL260 can be used with a Box-style (IC694TBB032), Extended Box-style (IC694TBB132), Spring-style (IC694TBS032), or Extended Spring-style (IC694TBS132) Terminal Block.
- Question: What do Extended terminal blocks do? Answer: They provide the extra shroud depth typically needed for field wiring to AC devices.
- Question: What does the TB LED green light mean? Answer: It means that the module's removable terminal block is locked in place.
- Question: What does the TB LED red light mean? Answer: It means that the module's terminal block is not locked in place.
- Question: Into what can the IC694MDL260 be installed? Answer: The IC694MDL260 can be installed in any I/O slot in an RX3i system. It must be used with RX3i CPU release date 3.50 or later.
- Question: What should I do if my module is not working? Answer: If your IC694MDL260 is not working, then your product may be in need of repair.
For more information on the IC694MDL260 Grouped Input Module of the GE RX3i Series, please see the Datasheet Manual.
Common related search terms: BatteryBuy, Configuration, Datasheet, Dimension, Emerson, Fanuc, Firmware, GE, GE-Fanuc, Manual, PDF, PLC, Price, Repair, Specification, Troubleshoot, User-Manual, Wiring,
