GE / IP FANUC Series 90/30 In Stock
IC694MDL250
RX3i MDL250 Digital I/O
SKU 2177362 UPC 0468248046165
All product names, trademarks, brands and logos used on this site are the property of their respective owners. PDF Supply is not an authorized distributor, reseller or representative of the products featured on this website. The depiction, description or sale of products featuring these names, trademarks, brands and logos is for identification purposes only and is not intended to in indicate any affiliation with or authorization by any rights holder.
PDF Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with PDF Supply's 1-year, 2-year, or 3-year warranty.
Other Available Revisions for the IC694MDL250 IC694MDL250-AAIC694MDL250-BAIC694MDL250-CAIC694MDL250-DAIC694MDL250-LT
Common misspellings:
- 1C694MDL250
- IC69AMDL250
- IC694MD1250
- IC694MDL25o
- IC694MDL250
Product Description
IC694MDL250 is a 120 VAC 16-Point Isolated Input Module by GE Fanuc. The 16 isolated input points can be used on different phases of the AC supply or powered from the same supply. An RC snubber protects the inputs against transient electrical noise that may be present on the power line. Input filtering time on the module can be changed during operation by the application program. DIP switch settings are not required. The IC694MDL250 module can be used with a box-style (IC694TBB032), extended box-style (IC694TBB132), spring-style (IC694TBS032), or extended spring-style (IC694TBS132) terminal blocks. Extended terminal blocks provide extra shroud depth generally required for field wiring to AC devices. Note: Terminal blocks are ordered separately.
Individually numbered LEDs on the module show the ON/OFF status for individual input points. The TB LED is green when the removable terminal block is appropriately locked and red when the terminal is not locked. Red bands situated on the door card warn the user that the IC694MDL250 is high-voltage. This module can be installed in any I/O slot as part of the RX3i system. It must, however, be used with RX3i CPU release 3.50 or later and is not compatible with a Series 90-30 PLC CPU. If an input filter time is applied to all of the module’s inputs, input filtering should be enabled in the module’s software configuration. The Digital Filter Settings Length must be at 16, and a memory location value must be identified. Configuring a Digital Filter Settings Length of 0 will disable the input filter.
Technical Specifications
| Rated Voltage: | 120 volt AC |
| # of Inputs: | 16 |
| Freq: | 50/60 Hz |
| Input Current: | 7 mA at rated voltage |
| Input Voltage Range: | 0 to 132 VAC |
| Power Consumption: | 220 mA from 5V bus |
Technical Information
Specifications:
|
Rated Voltage |
120VAC |
|
Input Voltage Range |
0 – 132VAC (47 to 63 Hz), 120VAC nom. |
|
Inputs per Module |
16 isolated |
|
Isolation |
|
|
Field to Backplane |
250 VAC continuous; 1500 VAC for 1 minute |
|
Group to Group |
250 VAC continuous; 1500 VAC for 1 minute |
|
Input Current |
7.0 mA per point (typical) at rated voltage |
|
Input Filter Times |
20ms to 2540ms, sent from CPU. No DIP switch |
|
|
settings required. |
|
Power Consumption |
220mA (with all inputs on) from 5 volt bus on backplane |
|
Diagnostics |
Field side terminal block reported to RX3i CPU |
|
Input Characteristics: |
|
|
On–state Voltage |
70-132VAC |
|
Off–state Voltage |
0 to 20VAC |
|
On–state Current |
5mA minimum |
|
Off–state Current |
2.5mA maximum |
|
On/Off Response Time |
+0-1 AC cycles for filter times up to 840ms |
|
|
+1-2 AC cycles for filter times of 840 to 1600ms |
|
|
+2-3 AC cycles for filter times of 1600 to 1920ms |
|
|
+3-4 AC cycles for filter times of 1920ms or more |
Troubleshooting
Troubleshooting IC694MDL250
Troubleshooting information is available on IC694MDL250’s website page; it also includes a datasheet user-manual and a wiring diagram.
Repair your IC694MDL250
PDF Supply can repair your IC694MDL250 in 3-5 business days. And PDF Supply stands by all of its repairs with a 1 year customer satisfaction warranty.
Customer Questions and Answers
- Question: What is an IC694MDL250? Answer: The IC694MDL250 is a 120VAC 16-Point Isolated Input module. This module provides 16 isolated input points. These input points can be used on different phases of the AC supply or they can be powered from the same supply.
- Question: What does a RC snubber do for this module? Answer: It protects each input against transient electrical noise on the power line.
- Question: With what Terminal Blocks can the IC694MDL250 be used? Answer: The IC694MDL250 can be used with a Box-style (IC694TBB032), Extended Box-style (IC694TBB132), Spring-style (IC694TBS032), or Extended Spring-style (IC694TBS132) Terminal Block.
- Question: What do Extended terminal blocks do? Answer: They provide the extra shroud depth typically needed for field wiring to AC devices.
- Question: What does the TB LED green light mean? Answer: It means that the module's removable terminal block is locked in place.
- Question: What does the TB LED red light mean? Answer: It means that the module's terminal block is not locked in place.
- Question: Into what can the IC694MDL250 be installed? Answer: The IC694MDL250 can be installed in any I/O slot in an RX3i system. It must be used with RX3i CPU release date 3.50 or later.
- Question: What should I do if my module is not working? Answer: If your IC694MDL250 is not working, then your product may be in need of repair.
For more information on the IC694MDL250 Isolated Input Module of the GE RX3i Series, please see the Datasheet Manual.
Release History
|
Version |
Description |
|
IC694MDL250-CA Firmware revision: 1.20 |
Label change only. No change in functions, performance or compatibility. |
|
IC694MDL250-BA Firmware revision: 1.20 |
Hardware update to correct a manufacturing issue. |
|
IC694MDL250-AA Firmware revision: 1.20 |
Initial Release |
Common related search terms: BatteryBuy, Configuration, Datasheet, Dimension, Emerson, Fanuc, Firmware, GE, GE-Fanuc, Manual, PDF, PLC, Price, Repair, Specification, Troubleshoot, User-Manual, Wiring,
