GE / IP FANUC Series 90/30 In Stock
IC694MDL240
RX3i MDL240 Digital I/O
SKU 2176153 UPC 0178937374836
All product names, trademarks, brands and logos used on this site are the property of their respective owners. PDF Supply is not an authorized distributor, reseller or representative of the products featured on this website. The depiction, description or sale of products featuring these names, trademarks, brands and logos is for identification purposes only and is not intended to in indicate any affiliation with or authorization by any rights holder.
PDF Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with PDF Supply's 1-year, 2-year, or 3-year warranty.
Other Available Revisions for the IC694MDL240 IC694MDL240AIC694MDL240BIC694MDL240-LT
Common misspellings:
- 1C694MDL240
- IC69AMDL240
- IC694MD1240
- IC694MDL2A0
- IC694MDL24o
- IC694MDL240
Technical Specifications for IC694MDL240
| Manufacturer | GE Fanuc |
|---|---|
| Series | RX3i PACSystems |
| Part Number | IC694MDL240 |
| Product Type | Input Module |
| Rated Voltage | 120 Volts AC |
| Input Voltage Range | 0 to 132 Volts AC |
| Frequency | 50 to 60 Hertz |
| Inputs per Module | 16 |
| Isolation: Field to Backplane | 250V AC continuous |
| Isolation: Field to Frame Ground | 1500V AC for 1 minute |
Product Description
The IC694MDL240 is a 120 Volt AC Input Module with 16 input points sharing one common power input terminal. It is manufactured by GE Fanuc for the Rx3i PACSystem series. The input circuits are resistor/capacitor, or reactive, inputs. The maximum simultaneous input number is dependent upon ambient temperature outlined in the manual provided.
Current into an input point will result in a logic 1 in the input status table (%I). Input characteristics are compatible with a variety of input devices, including pushbuttons, limit switches, and electronic proximity switches. Operation power is user-supplied. The IC694MDL240 module requires an AC power source. DC power is not suitable. IC694MDL240 is equipped with 16 green LEDs that alert the user to the ON/OFF status of the 16 points. Red bands on the label warn that IC694MDL240 is a high-voltage module. The IC694MDL240 module can be installed in any I/O slot in an RX3i system.
Technical Specifications
| Rated Voltage: | 120 volts AC |
| # of Inputs: | 16 (one group) |
| Freq: | 50/60 Hz |
| Input Current: | 12 mA |
| Input Voltage Range: | 0 to 132 volts AC |
| Power Consumption: | 90 mA from 5 V bus |
The IC694MDL240 module is an input module that has been designed by GE Fanuc Automation and it comes with 16 input points that share a common power input terminal. The circuits come with reactive inputs, which means that they have been designed as resistor and capacitor inputs. The module works with an AC power source, and it cannot be used with a DC power source. The inputs of the GE Fanuc Automation IC694MDL240 input module are fully compatible with different input devices such as pushbuttons, limit switches and electronic proximity switches. The power needs to be supplied by the users and the module can be installed in any slot of an RX3i PACSystems rack.
The GE Fanuc Automation IC694MDL240 input module has 16 LED indicators that show the on and off status of each input point and red bands that show that this module is a high-voltage module. The GE Fanuc Automation IC694MDL240 input module has a rated voltage of 120 Volts AC and an input voltage range of 0 to 132 Volts AC with a frequency of 50 to 60 Hertz. The module provides an isolation voltage of 250 Volts AC continuous from the field side to the backplane and 1500 Volts AC isolation from the field side to the frame ground for 1 minute. The inputs come with an on-state voltage of 74 to 132 Volts AC and off-state voltage of 0 to 20 Volts AC. With a current rating of 6 milliamps minimum in the on-state and 2.2 milliamps maximum in the off-state. The module has a power consumption rating of 90 milliamps at 5 Volts DC Bus backplane voltage. The inputs used per module will depend on the operating temperature.
Technical Information
Specifications:
|
Rated Voltage |
120 Vac |
|
Input Voltage Range |
0 to 132 Vac, 50/60 Hz |
|
Inputs per Module |
16 (one group with a single common) The maximum number of inputs on at the same time depends on the ambient temperature (Figure 131). |
|
Isolation: Field to Backplane (optical) and to frame ground |
250 Vac continuous; 1500 Vac for one minute |
|
Input Current |
12 mA (typical) at rated voltage |
|
Input Characteristics: |
|
|
On–state Voltage |
74 to 132 Vac |
|
Off–state Voltage |
0 to 20 Vac |
|
On–state Current |
6 mA minimum |
|
Off–state Current |
2.2mA maximum |
|
On response Time |
30 ms maximum |
|
Off response Time |
45 ms maximum |
|
Power Consumption |
90 mA (all inputs on) from 5 Vdc bus on backplane |
Troubleshooting
Troubleshooting IC694MDL240
Troubleshooting information is available on IC694MDL240's website page; it also includes a datasheet user-manual and a wiring diagram.
Repair your IC694MDL240
PDF Supply can repair your IC694MDL240 in 3-5 business days. And PDF Supply stands by all of its repairs with a 1 year customer satisfaction warranty.
Customer Questions and Answers
- Question: What is an IC694MDL240? Answer: The IC694MDL240 is a 16-Point, 120 Volt AC, Input module from the GE Fanuc RX3i Series.
- Question: What does IC694MDL240 provide? Answer: IC694MDL240 provides 16 input points with one common power input terminal.
- Question: What kind of input circuits does IC694MDL240 have? Answer: They are reactive (resistor/capacitor) inputs.
- Question: What is the result when current gets put into an input point? Answer: This will result in a logic 1 in the input status table (%I).
- Question: With what are the input characteristics compatible? Answer: They are compatible with a wide range of input devices, such as pushbuttons, limit switches, and electronic proximity switches.
- Question: From where must power to operate the field devices be supplied? Answer: Power to operate the field devices must be supplied by the user.
- Question: What kind of power source does IC694MDL240 require? Answer: This module requires an AC power source; it canNOT be used with a DC power source.
- Question: The 16 green LEDs indicate what? Answer: They indicate the ON/OFF status of points 1 through 16.
- Question: The red bands on the label show what? Answer: They show that IC694MDL240 is a high-voltage module.
- Question: Into what slot should IC694MDL240 be installed? Answer: IC694MDL240 can be installed in any I/O slot of an RX3i system.
- Question: What should I do if my IC694MDL240 is not working properly? Answer: Your IC694MDL240 may need repair.
For more information on the IC694MDL240 16-Point, 120 Volt AC, Input Module of the GE Fanuc RX3i Series, please see the Datasheet User-Manual.
Common related search terms: BatteryBuy, Configuration, Datasheet, Dimension, Emerson, Fanuc, Firmware, GE, GE-Fanuc, Manual, PDF, PLC, Price, Repair, Specification, Troubleshoot, User-Manual, Wiring,
