GE / IP FANUC Series 90/30 In Stock
IC694DNM200
RX3i DNM200 Communication
SKU 2173427 UPC 0799705793415
All product names, trademarks, brands and logos used on this site are the property of their respective owners. PDF Supply is not an authorized distributor, reseller or representative of the products featured on this website. The depiction, description or sale of products featuring these names, trademarks, brands and logos is for identification purposes only and is not intended to in indicate any affiliation with or authorization by any rights holder.
PDF Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with PDF Supply's 1-year, 2-year, or 3-year warranty.
Other Available Revisions for the IC694DNM200 IC694DNM200-AAIC694DNM200-ABIC694DNM200-BBIC694DNM200-LT
Common misspellings:
- 1C694DNM200
- IC69ADNM200
- IC694DNM2o0
- IC694DNM20o
- IC694DNM200
Product Description
IC694DNM200 is a GE Fanuc manufactured DeviceNet Master Module for the RX3i series. The single-slot module enables the CPU to send and receive information over the DeviceNet network. It can server as a master to 63 “slaves” on the network. Moreover, it can also be configured to act as a slave to another master module located on the bus. The module can be installed on any I/O slot in the RX3i or 90-30 series backplane. It is compatible with any CPU in the 90-30 series as well as PACSystems Rx3i CPU model IC695CPU310 release 3.5 and later. It is not compatible with VersaPro or LogicMaster programming software or the 90-30 series handheld programmer IC693PRG300. The IC694DNM200 master module is compatible with any CPU in the 90-30 series with exception of IC693CPU321 or IC693CPU340 release 8.0 and later firmware.
The IC694DNM200 runs on DeviceNet protocol and 5 VDC with a current of 450mA. It supports baud rates of 125K, 250K, and 500K of the DeviceNet network. On the master module, be sure to locate 3 LEDs that display communication and operating status. They are labeled Net Power, Mod Status and Net Status. Directly below the LEDs is the sSerial port RS-232 used for connecting the master module to a PC during firmware updates. Devices are connected to the trunk cable or to drop lines, which are joined to the trunk cable with taps. Taps are mountable on panels or junction boxes. Recommended module storage ranges from -40oC to 85oC with operating temperatures of between of 0oC and 60oC.
Technical Specifications
| Module Type: | DeviceNet Master |
| Number of Slots: | 1 (single slot) |
| Backplane Support: | CPU rack only |
| Protocol Support: | DeviceNet |
| Entity Type: | Master |
| Internal Power: | 450 mA @ 5 VDC |
Technical Information
Specifications:
|
Catalog Numbers |
IC693DNM200, IC694DNM200 |
|
Description |
Master Module for DeviceNet networks |
|
Mounting Location Series 90-30 |
Series 90-30 main rack: Any slot except slots 0 and 1. |
|
PACSystems RX3i |
RX3i main rack: Any slot except slot 0. |
|
|
DeviceNet Master modules cannot be installed in remote or expansion racks. |
|
Environment |
Storage temperature: -40ï‚°C to 85ï‚°C Operating temperature: 0ï‚°C to 60ï‚°C |
|
Backplane Current Consumption |
450mA at 5VDC (typical) |
|
Data rates |
Supports all standard DeviceNet data rates (125K, 250K, and 500K Baud) |
Troubleshooting
Troubleshooting IC694DNM200
Troubleshooting information is available on IC694DNM200's website page; it also includes a datasheet user-manual and a wiring diagram.
Repair your IC694DNM200
PDF Supply can repair your IC694DNM200 in 3-5 business days. And PDF Supply stands by all of its repairs with a 1 year customer satisfaction warranty.
Customer Questions and Answers
- Question: What is an IC694DNM200? Answer: The IC694DNM200 is a DeviceNet Master module from the GE Fanuc RX3i Series.
- Question: What does IC694DNM200 allow the CPU to do? Answer: This module allows the CPU to send and receive data over a DeviceNet network.
- Question: For up to how many "slaves" can IC694DNM200 act as a master? Answer: 63
- Question: How can this module be configured? Answer: It can be configured to simultaneously function as a slave to another master on the bus.
- Question: What does the IC694DNM200 communicate with: Answer: This module is a communications network that transmits data between control systems (such as: PLCs, PCs, VMEbus computers, and robot controllers) and distributed industrial devices such as switches, sensors, valve manifolds, motor starters, bar code readers, drives, displays, and operator interfaces.
- Question: Where should IC694DNM200 be installed? Answer: This module can be installed in any available I/O slot in any RX3i or Series 90-30 backplane.
- Question: With what is it compatible? Answer: It is compatible with PACSystems RX3i IC695CPU310 CPU, release 3.5 or later. It is also compatible with any Series 90-30 CPU except IC693CPU321 or IC693CPU340 with release 8.0 or later CPU firmware. Release 10 or later is recommended.
- Question: What programming software is required? Answer:
- Machine Edition Logic Developer PLC version 3.0 SP1 Special 2 or later is required.
- This module is NOT compatible with VersaPro, Control, or Logicmaster programming software and a Series 90-30 Hand-Held Programmer (IC693PRG300) cannot be used for configuration.
- Machine Edition Logic Developer PLC version 3.0 SP1 Special 2 or later is required.
- Question: What should I do if my IC694DNM200 is not working properly? Answer: Your IC694DNM200 may need repair.
For more information on the IC694DNM200 DeviceNet Master Module of the GE Fanuc RX3i Series, please see the Datasheet User-Manual.
Release History
|
IC694DNM200 Catalog Suffix |
Firmware Version |
Boot Firmware Version |
EDS File Version (9030master.eds) |
Date |
Comments |
|
BB |
1.25 |
1.00 |
1.04 |
Jul. 2011 |
Label change. No changes to features, performance or compatibility. |
|
AB |
1.25 |
1.00 |
1.04 |
Jul. 2006 |
Firmware Version 1.25 corrects issue with faults caused by multiple successive COMMREQs. |
|
AA |
1.22 |
1.00 |
1.04 |
Aug 2004 |
|
|
IC693DNM200 Catalog Suffix |
Firmware Version |
Boot Firmware Version |
EDS File Version (9030master.eds) |
Date |
Comments |
|
CD |
1.25 |
1.00 |
1.04 |
Jul. 2011 |
Label change. No changes to features, performance or compatibility. |
|
BD |
1.25 |
1.00 |
1.04 |
Jul. 2006 |
Firmware Version 1.25 corrects issue with faults caused by multiple successive COMMREQs. |
|
BC |
1.22 |
1.00 |
1.04 |
Nov 2004 |
|
|
AB |
1.18 |
1.00 |
1.04 |
Dec 2003 |
|
|
AA |
1.16 |
1.00 |
1.04 |
Aug 2002 |
|
Common related search terms: BatteryBuy, Configuration, Datasheet, Dimension, Emerson, Fanuc, Firmware, GE, GE-Fanuc, Manual, PDF, PLC, Price, Repair, Specification, Troubleshoot, User-Manual, Wiring,
