GE / IP FANUC Series 90/30 In Stock
IC694BEM320
RX3i BEM320 Specialty
SKU 2176420 UPC 0799705802346
All product names, trademarks, brands and logos used on this site are the property of their respective owners. PDF Supply is not an authorized distributor, reseller or representative of the products featured on this website. The depiction, description or sale of products featuring these names, trademarks, brands and logos is for identification purposes only and is not intended to in indicate any affiliation with or authorization by any rights holder.
PDF Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with PDF Supply's 1-year, 2-year, or 3-year warranty.
Other Available Revisions for the IC694BEM320 IC694BEM320AIC694BEM320-LT
Common misspellings:
- 1C694BEM320
- IC69ABEM320
- IC6948EM320
- IC694BEM32o
- IC694BEM320
Product Description
The IC694BEM320 is an Rx3i I/O Link Interface module, also known as a slave. This module is a high performance, scalable, and modular control system that supports the PACSystem engine. It operate as a slave on the GE I/O Link network. This particular module can exchange wither 32 or 64 inputs and outputs with the master. The possible master types that can be utilized include PACSystems, Series 90-30, and Series 90-70, a GE Series 15, Series 16, or Series 18 CNC, a GE Series0 Model C CNC, and a GE F-D Mate CNC. The choice of master is up to each individual installer. IC694BEM320 can be installed on any available backplane slot in the RX3i or Series 90-30 PLC.
The maximum number of I/O Link Interface Modules depends on the power available from the power supply. To determine the exact number of modules allowed, a manual may be downloaded. Typically, when multiple I/O link interface modules are in the same system, they are on separate links. However, it is possible to have multiple link interfaces connected to the same link if necessary.
The IC694BEM320 is a standard RX3i module and easily plugs into the PLC backplane. Additionally, the module’s front cover can be removed. A jumper plug inside the front cover is used to set up the module. Though the factory default is as a 32 point, 64 point can also be used. The front of the module has two 20-point pin connectors. Signal levels are all RS422/485 compatible.
Technical Specifications
| Module Type: | I/O Link Interface |
| Number of Slots: | 1 (single slot) |
| Backplane Support: | Universal Backplane |
| I/O Points: | 32 or 64, jumper slectable |
| Communication Ports: | (2) RS485/422 |
| LEDs | OK, RDY |
Technical Information
Specifications
|
Module type |
RX3i I/O Link Interface Module, providing I/O Link communications with I/O Link Master. |
|
LEDs |
OK, RDY |
|
I/O Points |
32 or 64, jumper selectable |
|
+5V current |
without Optical Adapter connected: 205mA with Optical Adapter: 405 mA |
|
User Manual |
RX3i I/O Link Interface Modules User’s Manual, GFK-2358 |
|
|
|
Troubleshooting
Troubleshooting IC694BEM320
Troubleshooting information is available on IC694BEM320's website page; it also includes a datasheet user-manual and a wiring diagram.
Repair your IC694BEM320
PDF Supply can repair your IC694BEM320 in 3-5 business days. And PDF Supply stands by all of its repairs with a 1 year customer satisfaction warranty.
Customer Questions and Answers
- Question: What is an IC694BEM320? Answer: The IC694BEM320 is an I/O Link Interface Module from the GE Fanuc RX3i Series.
- Question: What does IC694BEM320 do for the RX3i system? Answer: This module operates as a slave on a Fanuc I/O Link network.
- Question: How does the IC694BEM320 relate to the master? Answer: This module can exchange either 32 or 64 inputs and outputs with the master. Typical masters on the I/O Link include all modern FANUC CNCs and Power Mates.
- Question: How many modules can be located in the main PACSystems RX3i backplane? Answer: The maximum number of modules installed on the backplane depends on the power that is available from the power supply.
- Question: Where must IC694BEM320 be located? Answer: IC694BEM320 can be installed in any available backplane slot.
- Question: What should I do if my IC694BEM320 is not working properly? Answer: Your IC694BEM320 may need repair.
For more information on the IC694BEM320 I/O Link Interface Module of the GE Fanuc RX3i Series, please see the Datasheet User-Manual.
Coming soon
Common related search terms: BatteryBuy, Configuration, Datasheet, Dimension, Emerson, Fanuc, Firmware, GE, GE-Fanuc, Manual, PDF, PLC, Price, Repair, Specification, Troubleshoot, User-Manual, Wiring,
