GE / IP FANUC Series 90/30 In Stock
IC694APU305
RX3i APU305 Specialty
SKU 2172258 UPC 0799705802353
All product names, trademarks, brands and logos used on this site are the property of their respective owners. PDF Supply is not an authorized distributor, reseller or representative of the products featured on this website. The depiction, description or sale of products featuring these names, trademarks, brands and logos is for identification purposes only and is not intended to in indicate any affiliation with or authorization by any rights holder.
PDF Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with PDF Supply's 1-year, 2-year, or 3-year warranty.
Other Available Revisions for the IC694APU305 IC694APU305AIC694APU305BIC694APU305-LT
Common misspellings:
- 1C694APU305
- IC69AAPU305
- IC694APU3o5
- IC694APU305
Product Description
The IC694APU305 is an I/O Processor Module from the GE Fanuc RX3i Series. This module provides direct processing of rapid pulse signals for industrial control applications. See specifications for this unit on IC694APU305's website page.
Technical Specifications
| Processing Speed: | 30 kHz (Absolute), 200kHz (A Quad B) |
| Power Supply Voltage: | 5 volts DC from backplane |
| Power Supply Current: | 360 mA |
| Module Type: | I/O Processor Module |
| Input/Output Type: | N/A |
| Power Consumption: | 360mA from 5V bus |
Technical Information
8.2.1 Specifications:
|
Power Supply Voltage |
5Vdc from backplane |
|
Power Supply Current |
360mA + (10mA x number of ON faceplate outputs) |
|
Field I/O to logic isolation |
Peak (1 second): 1500 V Steady State: 30 V ac/Vdc |
|
Maximum Number of modules per RX3i system |
No limit |
|
Input Specifications |
|
|
Input type |
Positive Logic, optically isolated. Note: Input Common is internally connected to Output Common |
|
Input Circuit Power |
Supplied by module using DC/DC converter |
|
Encoder Power |
Supplied by user (5V or 10–30 V dc). (Inputs will operate with Output Circuit power disconnected) |
|
Input Impedance |
4300 typical |
|
Input Threshold |
8.0v (non–TTL), 1.5V (TTL) |
|
Input Hysteresis |
250 mV typical |
|
Maximum Input Voltage |
+30 V dc |
|
Input duty cycle limit |
If Input 1–12 voltages exceed 24.0 V dc, derate total input duty cycle from 100% at 40° C to 50% at 60° C |
|
Input filter delays |
Absolute Encoder: 20 μs AQUADB Encoder & Preload: 20 μs / 2 μs selectable AQUADB Home Switch: 10 ms AQUADB IN 6–8: 10 ms |
|
Minimum Strobe Input Pulse Width |
2ms (Minimum time between consecutive strobe inputs) |
|
Strobe Register Resolution |
1ms (Maximum time from when strobe input is asserted until the strobe register value is updated) |
|
Maximum Count Rate |
30 kHz (Absolute Encoder) 200 kHz (A Quad B Encoder) |
|
Input Cable |
Shielded cable recommended, Maximum length: 30m |
|
Output Specifications |
|
|
Output type |
Positive Logic, optically isolated |
|
Maximum Supply Voltage |
30.0 V dc |
|
Continuous Output Current (10–30 V dc supply) |
1.0 A (each output 1–4) 0.5 A (each output 5–8) |
|
Total Continuous Output Current at 40° C |
4.0 A (total of outputs 1–8) |
|
Output 1–4 derating above 40° C |
Derate total Output 1–4 current to 2.0A at 60° C |
|
Output 5–8 derating above 40° C |
Derate total Output 5–8 current to 0.5A at 60° C |
|
Output current using 5Vdc supply |
20 mA typical with 5.0 V dc supply 2 mA minimum with 4.9Vdc supply |
|
Inductive Load Clamp Voltage |
–8.0 V typical (outputs 1–4) –1.0 V typical (outputs 5–8) |
|
OFF state leakage current |
10 mA (each output) |
|
Output Fuse |
5 A (5x20mm replaceable) common to all outputs |
|
Output Response Time |
500 μs typical |
Troubleshooting
Troubleshooting IC694APU305
Troubleshooting information is available on IC694APU305's website page; it also includes a datasheet user-manual and a wiring diagram.
Repair your IC694APU305
PDF Supply can repair your IC694APU305 in 3-5 business days. And PDF Supply stands by all of its repairs with a 1 year customer satisfaction warranty.
Customer Questions and Answers
- Question: What is an IC694APU305? Answer: The IC694APU305 is an I/O Processor Module from the GE Fanuc RX3i Series.
- Question: What does IC694APU305 provide? Answer: This module provides direct processing of rapid pulse signals for industrial control applications.
- Question: What industrila control application is the IC694APU305 suited for? Answer: This module is suited for:
- Fast response process control
- Velocity measurement
- Material handling, marking and packaging.
- Question: What can IC694APU305 do? Answer: This module is able to sense inputs, process the input count information, and control the outputs without having to communicate with a CPU.
- Question: What do the 6 green LEDs indicate? Answer: They indicate the operating status of the module, the status of configuration parameters and the state of the hardware outputs 1 thru 4.
- Question: What do some of the features of IC694APU305 include? Answer:
- Up to 12 positive logic (source) inputs with input voltage range selection of either 5 VDC or 10 to 30 VDC
- Up to 8 positive logic (source) outputs
- Outputs protected by replaceable fuse
- Counts per timebase register for input rate measurement
- Total Counts register accumulates toatl counts received by module
- Internal module diagnostics
- Question: How can the inputs and outputs be used? Answer: The inputs can be used as count signals or edge-sensitive strobe signals. The outputs can be used to drive indicating lights, solenoids, relays and other devices.
- Question: What should I do if my IC694APU305 is not working properly? Answer: Your IC694APU305 may need repair.
For more information on the IC694APU305 I/O Processor Module of the GE Fanuc RX3i Series, please see the Datasheet User-Manual.
|
Rel. |
Ver. |
Date |
IPI |
Upgrade Kit |
New Features |
Problems Resolved |
|
D, B |
1.21 |
7-Aug |
GFK-1051C |
IC693APU305D:44A737646-G02 |
NA |
See GFK-1051C. |
|
|
||||||
|
IC694APU305B:82A1117-MS10-000-A1 |
||||||
|
C |
1.2 |
Jul-96 |
GFK-1051B |
44A737646-G01 |
NA |
%I Bit Indications TTL Input Configuration |
|
Negative Direction Configuration Non-Zero Offset Value |
||||||
|
B |
|
Jun-95 |
GFK-1051a |
N/A |
CE Mark approval |
|
|
A |
|
Jun-94 |
GFK-1051 |
N/A |
Initial Product Release |
|
Common related search terms: BatteryBuy, Configuration, Datasheet, Dimension, Emerson, Fanuc, Firmware, GE, GE-Fanuc, Manual, PDF, PLC, Price, Repair, Specification, Troubleshoot, User-Manual, Wiring,
