GE / IP FANUC Series 90/30 In Stock
Home » GE Fanuc Emerson » RX3i PacSystem » IC694ALG442 » You are here: IC694ALG442-User-Manual
IC694ALG442-User-Manual
SKU 2172329 UPC 0799705802377
All product names, trademarks, brands and logos used on this site are the property of their respective owners. PDF Supply is not an authorized distributor, reseller or representative of the products featured on this website. The depiction, description or sale of products featuring these names, trademarks, brands and logos is for identification purposes only and is not intended to indicate any affiliation with or authorization by any rights holder.
Product Description
The GE Fanuc IC694ALG442 is an Analog Combination Current/Voltage Input/Output Module for Rx3i PacSystems. This module provides four distinct input channels and two single-ended output channels. Each channel can be configured using Machine Edition software in any of the following ranges: (0 to +10) unipolar, (-10 to +10 volts) bipolar, 0 to 20 mA, or 4 to 20 mA. The 0 to +10 unipolar range is the default setting for the system and will be automatic upon installation unless altered. In a higher mode, the input channels can be configured for a 4 to 20 mA range. The IC694ALG442 can be used in any I/O slot within the Rx3i system.
Various outputs can be configured. A Hold Last State is possible if the system power is interrupted or can be reset to the low end of the given series. Outputs may also be configured to run in ramp mode on command from the applicable program. Additionally, low and high alarm ranges can be set for all input channels with an open wire fault relayed to the CPU for each output channel.
This IC694ALG442 module must be attached to a 24 VDC power from an outside source for proper use. If used with the RX3i Universal Backplane, the external source can be attached through the TB1 connector located on the left hand side of the backplane. Another option is available through a direct connection on the module’s terminal block. If using the backplane, the external source must be connected to the terminal block. Resolution per bit is based on the configured input or the output range. If the current source is reversed into input, or if it is below the low end of the current range, the module inputs a data word equivalent to the low end of the range. Resolution of the translated signal is 12 binary bits from the A/D converter in the %AI. Each channel is capable of 15 to 16 bit converting.
As a bonus feature, IC694ALG442 can respond directly to specific COMMREQ commands from the application program for certain tasks, such as removing the error code, amending input alarm limits, and putting one or both outputs into ramp mode.
Technical Specifications
| No. of channels: | 4 In/2 Out |
| Voltage Range: | 0 to +10 V, -10 to +10 V |
| Current Range: | 0-20 mA, 4-20 mA |
| Update Rate: | 8 msec In/ 4 msec Out |
| Output Load: | 5 mA max |
| Power Consumption: | 95 mA @ +5VDC, 129 mA @ +24VDC Isolated |
Common related search terms: Battery, Buy, Configuration, Datasheet, Dimension, Emerson, Fanuc, Firmware, GE, GE-Fanuc, Manual, PDF, PLC, Price, Repair, Specification, Troubleshoot, User-Manual, Wiring,
You May Also Need
Your Item was added to your shopping cart!
Free Ground Shipping*
US continental orders placed Monday-Friday before 4:00pm EST! Free Ground delivery available on all orders.
Adding Items to Cart
PDF Supply sells used surplus products. PDF Supply is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by PDF Supply come with PDF Supply’s 1-year, 2-year, or 3-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. PDF Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because PDF Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, PDF Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. PDF Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. PDF Supply also makes no representations as to your right to install any such firmware on the product. PDF Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.