1-800-360-6802
[email protected]

GE / IP FANUC Series 90/30 In Stock

World's Largest Warehouse

of GE 90-30, Genius, and RX7i

1-800-360-6802

Mon-Fri 8AM-5PM EST

[email protected]

IC694ALG390-Emerson

★★★★★Rated 4.5/5 Based on 12 ratings.

Rate your purchase of the IC694ALG390

SKU 2170060  UPC 0799705802391

All product names, trademarks, brands and logos used on this site are the property of their respective owners. PDF Supply is not an authorized distributor, reseller or representative of the products featured on this website. The depiction, description or sale of products featuring these names, trademarks, brands and logos is for identification purposes only and is not intended to indicate any affiliation with or authorization by any rights holder.

Product Description

IC694ALG390 is manufactured by GE Fanuc for the Rx3i PacSystem. The IC694ALG390 is a 2-channel analog module with two output channels and the capability to convert digital data. The channels update after each scan at an approximate update rate of 5 milliseconds. The IC694ALG390 module outputs can be configured to Default or Hold Last State if the CPU resets for any reason or enters stop mode.

The IC694ALG390 has a voltage range usage of -10 to +10 volts. The external voltage ranges from 18VDC to 30VDC with a 10% external voltage ripple. The module’s location is important when analyzing power sources. If the module is located in an RX3i Universal Backplane, an external source of Isolated +24 VDC is required to provide module power. If the module is located in an Expansion Backplane, its primary power source can be the Isolated +24 VDC from the backplane power supply or an external Isolated +24 VDC supply connected to the terminal block. If the external source is between 27.5-30 VDC, it takes over the module’s load from the Isolated 24 VDC system supply. An external source should be used if the user needs to maintain hold last state operation during a loss of backplane power.

Field connections should be wired using a decent grade of twisted, shielded instrumentation cable to minimize capacitive loading and noise. The shields should be connected to GND on the user terminal connector block. The GND connection provides access to the backplane (frame ground), which results in rejection of noise caused by shield drain currents.


Technical Specifications

No. of channels: 2
Voltage Range: -10 to +10 V
Calibration: Factory (to 2.5 mV per count) 
Update Rate: 5 msec
Output Load:   5 mA max
Power Consumption:   32 mA @ +5VDC,  120 mA @ +24VDC Isolated

 

 

Part Number: IC694ALG390 / ic694alg390
Mfr/Brand Name: GE Automation
Mfr Number: IC694ALG390 / ic694alg390
Type: Analog Output Module, 2 Channel Voltage

ST. LOUIS, Feb. 1, 2019 – Emerson today announced it has completed the purchase of Intelligent Platforms from General Electric.

PDF Supply sells used surplus products. PDF Supply is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by PDF Supply come with PDF Supply’s 1-year, 2-year, or 3-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.

Rockwell Disclaimer: The product is used surplus. PDF Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because PDF Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, PDF Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. PDF Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. PDF Supply also makes no representations as to your right to install any such firmware on the product. PDF Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.