1-800-360-6802
[email protected]

GE / IP FANUC Series 90/30 In Stock

World's Largest Warehouse

of GE 90-30, Genius, and RX7i

1-800-360-6802

Mon-Fri 8AM-5PM EST

[email protected]

IC694ALG232-Configuration

★★★★★Rated 5/5 Based on 2 ratings.

Rate your purchase of the IC694ALG232

Image of IC694ALG232

SKU 2175451  UPC 00

All product names, trademarks, brands and logos used on this site are the property of their respective owners. PDF Supply is not an authorized distributor, reseller or representative of the products featured on this website. The depiction, description or sale of products featuring these names, trademarks, brands and logos is for identification purposes only and is not intended to indicate any affiliation with or authorization by any rights holder.

Product Description

The IC694ALG232 is an Advanced Diagnostics 16-Channel Input Analog Voltage Module manufactured by General Electric. Each channel can be arranged for both input stages. The module can be connected in any I/O slot that contains a serial connector in the RX3i system.

This PACSystems RX3i module provides 16 single-ended or eight differential input channels. Channels can be configured for input range 0 to 10 V (unipolar) or default -10 to +10 V (bipolar). High and low alarm limits can also be configured for the two ranges.

The IC694ALG232 is fully configurable using software, there are no module jumpers to set, and it offers configurable scaling and offsets per 16 channels.

Alarm detection settings/reporting include high, low, high-high, and low-low. Other features are module fault reporting, the ability to support diagnostic point fault contacts in the logic program, and firmware upgrades among others. The IC694ALG232 module also supports hot insertion/removal.  

If the module is located in an RX3i Universal Backplane, an external source of isolated +24 VDC is necessary to provide power. The external source must be connected using the TB1 connector on the backplane’s left side. If the module is instead located in an Expansion Backplane, the backplane’s power supply already provides the Isolated +24 VDC.

The IC694ALG232 comes equipped with a MODULE OK LED that displays status info. An ON status is OK and indicates that the module is properly configured. An OFF status means no backplane power is recognized or the watchdog timer is timed out. Continuous rapid blinking suggests that the CPU is not transmitting configuration data. Slow blinking by the LED followed by OFF tells the user that there is a failed power-up diagnostics issue or that a code execution error is noted. The Module P/S LED confirms that the internally-generated +5 VDC supply is at or above the required designated level.

Technical Specifications

No. of channels: 16 single-ended or 8 differential
Voltage Range: -10 to +10 V, 0 to 10 V
Calibration: Factory calibrated
Update Rate: 5 msec(all 16), 3 msec(all 8)
Input Filter Response:   23 Hz,  38 Hz
Power Consumption: 112 mA @ +5VDC,  110 mA @ +24VDC Isolated

 

 

16-Channel Advanced Analog Voltage Input module provides 16 single-ended or 8 differential input channels. 0 to 10 V (unipolar), -10 to +10V (bipolar) with 16 bit resolution. Advanced diagnostics.
ST. LOUIS, Feb. 1, 2019 – Emerson today announced it has completed the purchase of Intelligent Platforms from General Electric.

PDF Supply sells used surplus products. PDF Supply is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by PDF Supply come with PDF Supply’s 1-year, 2-year, or 3-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.

Rockwell Disclaimer: The product is used surplus. PDF Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because PDF Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, PDF Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. PDF Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. PDF Supply also makes no representations as to your right to install any such firmware on the product. PDF Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.