1-800-360-6802
[email protected]

GE / IP FANUC Series 90/30 In Stock

World's Largest Warehouse

of GE 90-30, Genius, and RX7i

1-800-360-6802

Mon-Fri 8AM-5PM EST

[email protected]

IC694ALG222-AA

★★★★★Rated 4.7/5 Based on 18 ratings.

Rate your purchase of the IC694ALG222

SKU 2175133  UPC 0799705802421

All product names, trademarks, brands and logos used on this site are the property of their respective owners. PDF Supply is not an authorized distributor, reseller or representative of the products featured on this website. The depiction, description or sale of products featuring these names, trademarks, brands and logos is for identification purposes only and is not intended to indicate any affiliation with or authorization by any rights holder.

Product Description


IC694ALG222 is a 16-Channel Analog Voltage Input Module manufactured by GE Fanuc that provides 16 single-ended (or eight) differential input channels. Each channel can be configured using configuration software for either input range options: 0 to 10 V (unipolar) or default -10 to +10 V (bipolar). High/low alarm limits can also be configured for unipolar or bipolar ranges. The IC694ALG222 can be installed in any I/O slot of an RX3i system.


Location of the IC694ALG222 module is important when identifying the appropriate power source. If the IC694ALG222 module is located in a Universal Backplane, an external source of Isolated +24 VDC is needed. The external source should be connected using the TB1 connector on the left side of the backplane. If the module is in an Expansion Backplane, the power supply provides the Isolated +24 VDC. 

 

Status information is indicated by the MODULE OK LED on power-up. ON means the status is OK, and the module is configured. OFF means there is no backplane power, or the software is not running (in other words, the watchdog timer has timed out. If the LED displays continuous rapid flashing, this suggests that configuration data is not being received from the CPU. Slow flashing followed by OFF indicates failed power-up diagnostics or a code execution error. The Module P/S LED confirms that the module’s +5 VDC supply meets the minimum designated level.


Technical Specifications

No. of channels: 16 single-ended or 8 differential
Voltage Range: -10 to +10 V, 0 to 10 V
Calibration: Factory calibrated
Update Rate: 6 msec(all 16), 3 msec(all 8)
Input Filter Response:   41 Hz,  82 Hz
Power Consumption: 112 mA @ +5VDC,  41 mA @ +24VDC Isolated

 

 

ST. LOUIS, Feb. 1, 2019 – Emerson today announced it has completed the purchase of Intelligent Platforms from General Electric.

PDF Supply sells used surplus products. PDF Supply is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by PDF Supply come with PDF Supply’s 1-year, 2-year, or 3-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.

Rockwell Disclaimer: The product is used surplus. PDF Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because PDF Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, PDF Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. PDF Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. PDF Supply also makes no representations as to your right to install any such firmware on the product. PDF Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.