GE / IP FANUC Series 90/30 In Stock
IC694ALG220
RX3i ALG220 Analog
SKU 2171267 UPC 0799705802438
All product names, trademarks, brands and logos used on this site are the property of their respective owners. PDF Supply is not an authorized distributor, reseller or representative of the products featured on this website. The depiction, description or sale of products featuring these names, trademarks, brands and logos is for identification purposes only and is not intended to in indicate any affiliation with or authorization by any rights holder.
PDF Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with PDF Supply's 1-year, 2-year, or 3-year warranty.
Other Available Revisions for the IC694ALG220 IC694ALG220AIC694ALG220BIC694ALG220-LT
Common misspellings:
- 1C694ALG220
- IC69AALG220
- IC694A1G220
- IC694ALG22o
- IC694ALG220
Product Description
IC694ALG220 is a 4–Channel Analog Voltage Input Module manufactured by GE Fanuc. It provides four analog input channels and accepts inputs in the range of -10 to +10 volts. Individual channels can be used with 4 to 20 mA inputs by jumpering the input terminals. Conversion speed for each channel is one millisecond providing an update rate of four milliseconds for any channel. This module can be installed in any I/O slot of an RX3i PLC system.
If the IC694ALG220 is located in an RX3i Universal Backplane, an external source of Isolated +24 VDC is needed to provide power for the module. The external source must be connected by way of the TB1 connector on the backplane’s left side. If this module is located in an Expansion Backplane, the power supply provides the Isolated +24 VDC output required. When the power supply is operating as expected, the Module OK LED will show ON.
All field connections to the module should be wired using a suitable grade of twisted, shielded instrumentation cable. This will minimize capacitive loading and noise. The shields can connect to either COM or GND. The COM connection provides access to the common of the analog circuitry. The GND connection provides access to the backplane (frame ground). Additionally, the (-) side of the voltage source can be tied to the COM terminal if the source is floating to limit common-mode voltages.
Technical Specifications
| No. of channels: | 4 Inputs |
| Voltage Range: | -10 to +10 volts DC |
| Calibration: | Factory calibrated |
| Update Rate: | 4 msec |
| Input Filter Response: | 17 Hz |
| Power Consumption: | 27 mA @ +5VDC and 98 mA @ +24VDC Isolated |
Technical Information
Specifications:
|
Voltage Range41 |
-10 to +10 Vdc |
|
Calibration |
Factory calibrated |
|
Update Rate |
4 ms (all four channels) |
|
Resolution |
5 mV/20 µA, (1 LSB = 5 mV) |
|
Absolute Accuracy42 |
±10 mV/40 µA (typical) over operating temperature ±30 mV/160 µA (maximum) over operating temperature |
|
Linearity |
<1 Least Significant Bit |
|
Isolation, Field to Backplane (optical) and to frame ground |
250 V ac continuous; 1500 V ac for 1 minute |
|
Cross–Channel Rejection |
> 80dB |
|
Input Impedance |
> 9 Mï— (voltage mode) |
|
|
250 ï— (current mode) |
|
Input Filter Response |
17 Hz |
|
Internal Power Consumption |
27 mA from +5Vdc bus on the backplane |
|
|
98 mA from the isolated +24Vdc backplane bus |
Troubleshooting
Troubleshooting IC694ALG220
Troubleshooting information is available on IC694ALG220's website page; it also includes a datasheet user-manual and a wiring diagram.
Repair your IC694ALG220
PDF Supply can repair your IC694ALG220 in 3-5 business days. And PDF Supply stands by all of its repairs with a 1 year customer satisfaction warranty.
Customer Questions and Answers
- Question: What is an IC694ALG220? Answer: The IC694ALG220 is a 4-Channel, Analog Input module from the GE Fanuc RX3i Series.
- Question: What range of inputs does IC694ALG220 accept? Answer: IC694ALG220 accepts inputs in the range of -10 to +10 volts.
- Question: How can individual channels be used? Answer: Individual channels can be used (with 4 to 20 mA inputs) by jumpering the input terminals.
- Question: What is the conversion speed for each of the 4 channels? Answer: The conversion speed for any one of the 4 channels is 1 millisecond.
- Question: What does this provide? Answer: This provides an update rate of 4 milliseconds for any channel.
- Question: Into what slot can this module be installed? Answer: IC694ALG220 can be installed into any I/O slot of an RX3i PLC system.
- What should I do if my IC694ALG220 is not working properly? Answer: Your IC694ALG220 may need repair.
For more information on the IC694ALG220 4-Channel, Analog Input Module of the GE Fanuc RX3i Series, please see the Datasheet User-Manual.
Common related search terms: BatteryBuy, Configuration, Datasheet, Dimension, Emerson, Fanuc, Firmware, GE, GE-Fanuc, Manual, PDF, PLC, Price, Repair, Specification, Troubleshoot, User-Manual, Wiring,
