1-800-360-6802
[email protected]

GE / IP FANUC Series 90/30 In Stock

World's Largest Warehouse

of GE 90-30, Genius, and RX7i

1-800-360-6802

Mon-Fri 8AM-5PM EST

[email protected]

STXKITDNS001

★ ★ ★ ★ ★ Rated 4/5 Based on 2 ratings.

Rate your purchase of the STXKITDNS001
GE Fanuc Manuals - RSTi PacSystem - STXKITDNS001

All product names, trademarks, brands and logos used on this site are the property of their respective owners. PDF Supply is not an authorized distributor, reseller or representative of the products featured on this website. The depiction, description or sale of products featuring these names, trademarks, brands and logos is for identification purposes only and is not intended to in indicate any affiliation with or authorization by any rights holder.

PDF Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with PDF Supply's 1-year, 2-year, or 3-year warranty.

Other Available Revisions for the STXKITDNS001 STXKITDNS001ASTXKITDNS001BSTXKITDNS001CSTXKITDNS001DSTXKITDNS001ESTXKITDNS001FSTXKITDNS001GSTXKITDNS001HSTXKITDNS001ISTXKITDNS001JSTXKITDNS001KSTXKITDNS001LSTXKITDNS001MSTXKITDNS001NSTXKITDNS001OSTXKITDNS001PSTXKITDNS001QSTXKITDNS001RSTXKITDNS001SSTXKITDNS001TSTXKITDNS001USTXKITDNS001VSTXKITDNS001WSTXKITDNS001XSTXKITDNS001YSTXKITDNS001Z

Common misspellings:
  • STXK1TDNS001
  • STXKITDNSo01
  • STXKITDNS0o1
  • STXKITDNS00l
  • STXKITDNS001

DeviceNet RSTi Starter Kit, limited to 1 per customer per customer site. Kit includes (1 each): DeviceNet Slave(STXDNS001),(8) 24VDC pos. inputs (ST-1218), (8) 24VDC source outputs (ST- 2328), (4) 4-20ma current inputs(ST-3214), (4) 4-20ma current ou

Technical Information

The STXKITDNS001 kit is a DeviceNet RSTi starter kit made by GE Fanuc. It features 8 source output points rated at 24 Volts DC source outputs with an input current rating of 4 to 20 milliamps. This innovative starter kit is incorporated with various RSTI tools. Even though it is not equipped with a mounting device, the STXKITDNS001 kit is still mountable on a DIN rail with a minimum length of 6 inches, which is about 150 millimeters, and it is accompanied by a Controller with PROFINET connectivity. There are 2 Ethernet ports that accommodate the RJ-45 cable to support communication over the internet which can be monitored on the interface terminal. The supported networks are the serial and Ethernet networks. Since it is an I/O series kit, it has an I/O configuration tool for devices such as the Modbus TCP, Ethernet/IP, PROFIBUS, and Modbus serial devices.

 

The GE Fanuc STXKITDNS001 DeviceNet RSTi starter kit features 2 independent power systems (the field power supply and module systems) that are meant for Pin 4 and Pin 5 at 0 Volts DC and for Pin 6 and Pin 7 when the voltage is 24 Volts DC. A 5 Volts DC pin Bus permits the power from a module to be transferred to the next one in the system. The modules that the STXKITDNS001 DeviceNet RSTi starter kit is made for are color coded for easy identification. Furthermore, 4 indicators are available and they are 2 green and 2 red LEDs that are used to indicate the individual component status and overall performance of the STXKITDNS001 DeviceNet RSTi starter kit.

ST. LOUIS, Feb. 1, 2019 – Emerson today announced it has completed the purchase of Intelligent Platforms from General Electric.

PDF Supply sells used surplus products. PDF Supply is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by PDF Supply come with PDF Supply’s 1-year, 2-year, or 3-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.

Rockwell Disclaimer: The product is used surplus. PDF Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because PDF Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, PDF Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. PDF Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. PDF Supply also makes no representations as to your right to install any such firmware on the product. PDF Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.