GE / IP FANUC Series 90/30 In Stock
All product names, trademarks, brands and logos used on this site are the property of their respective owners. PDF Supply is not an authorized distributor, reseller or representative of the products featured on this website. The depiction, description or sale of products featuring these names, trademarks, brands and logos is for identification purposes only and is not intended to in indicate any affiliation with or authorization by any rights holder.
PDF Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with PDF Supply's 1-year, 2-year, or 3-year warranty.
Other Available Revisions for the IC660BRD021 IC660BRD021AIC660BRD021BIC660BRD021CIC660BRD021DIC660BRD021EIC660BRD021FIC660BRD021HIC660BRD021KIC660BRD021LIC660BRD021MIC660BRD021NIC660BRD021PIC660BRD021QIC660BRD021RIC660BRD021SIC660BRD021TIC660BRD021UIC660BRD021VIC660BRD021WIC660BRD021XIC660BRD021YIC660BRD021Z
GE 24/48VDC SINK BLOCK FOR RDCY
The IC660BRD021 I/O block is a 24/48 Volts DC block manufactured by GE Fanuc. It is a DC sink block and it is mainly used for redundant output configuration. This block has 16 circuits located on the front. The sink block is used with electromechanical sensors. This Genius I/O block can be mounted up to 7500 feet away from the PLC. The sink block has a processing time of 1.7 milliseconds. It can be configured as an input, output, or a tristate input block. It can be connected directly to a PLC without using any extra components and logic states. The IC660BRD021 I/O block is designed with configurable features that include the switching module control, output power, selectable input filter time, and output test capability features. The advanced diagnostics features in the sink module help to detect issues during installation and operation. It also offers electronic circuit protection that shuts off if the surge current exceeds 15 Amps for more than 10 milliseconds.
The GE IC660BRD021 I/O block has a port that can connect handheld monitors or programmer terminals. The block to block isolation rating in the block is 1500 Volts. The IC660BRD021 I/O block dissipates 68.8 Watts of energy as heat under normal working conditions. The LEDs on the front are the “Unit OK” LED and the embedded I/O status LEDs for each of the I/O points. The power supply drop out time for the block is 10 milliseconds. The IC660BRD021 I/O block has an output current rating of 2 Amps per circuit and it has a maximum inrush current rating of 10 Amps for a time period of 10 milliseconds. The operating temperature should be set between 0 and 60 degrees Celsius with 5 to 95% relative humidity.
The final letter in the part number (ex. IC660BRD021K) indicates the revision. Revision K or later use the newer style electronic housing and therefore needs the newer style plastic door and may indicate some compatibility issues with the terminal strip.
Common related search terms: Emerson
PDF Supply sells used surplus products. PDF Supply is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by PDF Supply come with PDF Supply’s 1-year, 2-year, or 3-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. PDF Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because PDF Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, PDF Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. PDF Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. PDF Supply also makes no representations as to your right to install any such firmware on the product. PDF Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.