1-919-535-3180
[email protected]

GE / IP FANUC Series 90/30 In Stock

World's Largest Warehouse

of GE 90-30, Genius, and RX7i

1-919-535-3180

Mon-Fri 8AM-5PM EST

[email protected]

IC660BBD120F

★★★★★Rated 4.8/5 Based on 24 ratings.

Rate your purchase of the IC660BBD120

SKU 2176318  UPC 0550907769321

All product names, trademarks, brands and logos used on this site are the property of their respective owners. PDF Supply is not an authorized distributor, reseller or representative of the products featured on this website. The depiction, description or sale of products featuring these names, trademarks, brands and logos is for identification purposes only and is not intended to indicate any affiliation with or authorization by any rights holder.

Product Description

The IC660BBD120 is a high-speed GE Fanuc Input and Output block that comes with 12 inputs and four outputs. It is designed to be used with a handheld monitor and comes with an oscillator output used for displaying output signals. The I/O block has a rated voltage of 93 to 132 VAC or an equivalent of 10-30 Volts DC with an input voltage range of 5V to 30 volts DC and a load current of 200mA. Output voltage range varies from 4.75V to 5.25 Volts DC. The block can be powered by a 115 VAC source or a 10-30 VDC source. The block can also be powered simultaneously using both the DC and the AC source. Should the 115VAC fail, the I/O block will continue to run on DC powe

The configurable and self-contained module delivers a frequency of 200k Hz that is used for industrial purposes such as motion control, material handling, turbine flow meter, and velocity measurement among others. The user can easily configure the I/O block to count up or down, count both up and down, or count the difference between fluctuating values. At the top of the I/O block is an array of LEDs with the top two LEDs displaying unit status and communication status with the CPU. The bottom four LEDs display the ON/OFF status for every output. The block will accept 12 input signals and show four output signals.

The IC660BBD120 block does not need to communicate with a CPU before or during normal processes due to its direct processing engineering mode. It can automatically detect count and input as well as send output on its own. Output can be programmed to turn itself ON or OFF when an accumulated count reaches preset threshold values. Operating temperature ranges from 0-60o C, and the recommended storage temperature is -40 to 60o C. 

Technical Specifications

Rated Voltage: 93-132 VAC / 10-30 VDC
# of Points: 4 Type A or 2 Type B or 1 Type C (12 inputs and 4 outputs)  
Input Range: 5 VDC to 30 VDC
Load Current: 200 mA
Output Range::  4.75 VDC to 5.25 VDC
Count Rate:   High Freq. - 200 KHz, Low Freq. 40 Hz

 

In Stock! Block High Speed Counter IC660B IC660BB IC660BBD

Genius Performs Equally Well with High- or Low-Density I/O - Many different GE Fanuc I/O products may be integrated into a single Genius LAN including Genius I/O blocks, VersaMax¨ and Field Controlª. This flexibility allows users to deploy the most efficient combination of high-density and low-density distributed I/O for their application.
ST. LOUIS, Feb. 1, 2019 – Emerson today announced it has completed the purchase of Intelligent Platforms from General Electric.

Common related search terms: Configuration, Datasheet, Emerson, Manual, PDF, PLC, Price, Repair, Specification, Troubleshoot, User-Manual, Wiring, 

PDF Supply sells used surplus products. PDF Supply is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by PDF Supply come with PDF Supply’s 1-year, 2-year, or 3-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.

Rockwell Disclaimer: The product is used surplus. PDF Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because PDF Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, PDF Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. PDF Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. PDF Supply also makes no representations as to your right to install any such firmware on the product. PDF Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.