GE / IP FANUC Series 90/30 In Stock
IC660CBB901
SKU 2171446 UPC 0799705798625
All product names, trademarks, brands and logos used on this site are the property of their respective owners. PDF Supply is not an authorized distributor, reseller or representative of the products featured on this website. The depiction, description or sale of products featuring these names, trademarks, brands and logos is for identification purposes only and is not intended to in indicate any affiliation with or authorization by any rights holder.
PDF Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with PDF Supply's 1-year, 2-year, or 3-year warranty.
Other Available Revisions for the IC660CBB901 IC660CBB901AIC660CBB901BIC660CBB901CIC660CBB901DIC660CBB901EIC660CBB901FIC660CBB901GIC660CBB901HIC660CBB901IIC660CBB901JIC660CBB901KIC660CBB901LIC660CBB901MIC660CBB901NIC660CBB901OIC660CBB901PIC660CBB901QIC660CBB901RIC660CBB901-RRIC660CBB901SIC660CBB901TIC660CBB901UIC660CBB901VIC660CBB901WIC660CBB901XIC660CBB901YIC660CBB901Z
Common misspellings:
- 1C660CBB901
- IC66oCBB901
- IC660C8B901
- IC660CB8901
- IC660CBB9o1
- IC660CBB90l
- IC660CBB901
Genius Bus Controller Phase A without diagnostics Series Six Control IC660C IC660CB IC660CBB
Technical Information
The GE Fanuc IC660CBB901 bus controller is a Series Six Genius bus controller without diagnostics features. It is a Phase A device with a default baud rate setting of 153.6 Kilobaud only. Every device on a bus (including the hand-held monitors and bus controllers) must have a similar baud rate. It has power supply requirements of 5 and 12 Volts, and a rack requirement for the high capacity I/O rack or CPU rack. The bus scan time for the IC660CBB901 bus controller is less than 250 milliseconds. This controller does not detect duplicate device numbers, which means that there will be no device number conflict.
During power-up tests, both LEDs on the IC660CBB901 bus controller will be turned off in case the communication tests fail. When a single bus error is detected within a period of 250 milliseconds, the “COMM OK” LED will turn off. When the IC660CBB901 bus controller fails to turn on the bus, the “COMM OK” LED turns off in that situation too. The controller only supports analog blocks containing 4 input channels or less and it does not support RTD blocks. It offers programmed communication with specific datagrams between the blocks and bus controller only. The IC660CBB901 bus controller has discrete blocks with 8 bits (1 byte) only and analog blocks with 16-bit channel values that are handled as coherent data. When logged in, the block I/O LED turns on and never goes off. However, the device does not send a control data message to inputs-only blocks. The login process is relatively slow because the bus controller must process login messages for every bus scan.
Common related search terms: Emerson
