GE / IP FANUC Series 90/30 In Stock
SKU 2172051 UPC 0805712535495
All product names, trademarks, brands and logos used on this site are the property of their respective owners. PDF Supply is not an authorized distributor, reseller or representative of the products featured on this website. The depiction, description or sale of products featuring these names, trademarks, brands and logos is for identification purposes only and is not intended to in indicate any affiliation with or authorization by any rights holder.
PDF Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with PDF Supply's 1-year, 2-year, or 3-year warranty.
Other Available Revisions for the IC600LX648 IC600LX648AIC600LX648BIC600LX648CIC600LX648DIC600LX648EIC600LX648FIC600LX648GIC600LX648HIC600LX648IIC600LX648JIC600LX648KIC600LX648LIC600LX648MIC600LX648NIC600LX648OIC600LX648PIC600LX648QIC600LX648RIC600LX648-RRIC600LX648SIC600LX648TIC600LX648UIC600LX648VIC600LX648WIC600LX648XIC600LX648YIC600LX648Z
32K Logic/16K Register Memory Module LX648 Unit Mod Board Series Six PLC IC600L IC600LX
The IC600LX648 memory module is a GE Fanuc memory module for the GE programmable logic controllers or PLCs. It is a GE Series Six module. This compact module comes with a 32K logic and a 16K register memory module. The memory module is a flat board with memory components. It is portable and easy to install. It is also referred to as a combined memory module with CPU components, a register, and user memory. The IC600LX648 memory module has expandable memory capacities. It allows for battery backup by using the CMOS battery through the onboard auxiliary battery. It has “battery level” and “parity error” LED indicators that can be viewed on the front of the module. The “parity error” indicator helps to identify the problem and simplify the troubleshooting process. It also helps to provide data integrity. The “battery level” indicator warns the operators of a low battery when the battery needs to be replaced.
The circuit board of the IC600LX648 memory module has dimensions of 8.15 x 11 inches and the faceplate dimensions are 12.46 x 1.175 inches. It is powered with 5 Volts DC power through the backplane. The IC600LX648 memory module has a current rating of 1.5 Amps maximum. The operating temperature range should be set between 0 and 60 degrees Celsius with 5 to 95% non-condensing relative humidity levels. There is no enclosure on the module so it should be protected from dust, dirt, and water splashes from all directions. During the initial installation process, the parity errors should be cleared with the logic master device. The battery level and parity error indicators should be checked and the mains should be fully disconnected during installation.
Common related search terms: BatteryBuy, Configuration, Datasheet, Dimension, Emerson, Fanuc, Firmware, GE, GE-Fanuc, Manual, PDF, PLC, Price, Repair, Specification, Troubleshoot, User-Manual, Wiring,
PDF Supply sells used surplus products. PDF Supply is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by PDF Supply come with PDF Supply’s 1-year, 2-year, or 3-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. PDF Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because PDF Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, PDF Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. PDF Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. PDF Supply also makes no representations as to your right to install any such firmware on the product. PDF Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.