GE / IP FANUC Series 90/30 In Stock
IC610MDL155
SKU 2173318 UPC 0443816149493
All product names, trademarks, brands and logos used on this site are the property of their respective owners. PDF Supply is not an authorized distributor, reseller or representative of the products featured on this website. The depiction, description or sale of products featuring these names, trademarks, brands and logos is for identification purposes only and is not intended to in indicate any affiliation with or authorization by any rights holder.
PDF Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with PDF Supply's 1-year, 2-year, or 3-year warranty.
Other Available Revisions for the IC610MDL155 IC610MDL155AIC610MDL155BIC610MDL155CIC610MDL155DIC610MDL155EIC610MDL155FIC610MDL155GIC610MDL155HIC610MDL155IIC610MDL155JIC610MDL155KIC610MDL155LIC610MDL155MIC610MDL155NIC610MDL155OIC610MDL155PIC610MDL155QIC610MDL155RIC610MDL155-RRIC610MDL155SIC610MDL155TIC610MDL155UIC610MDL155VIC610MDL155WIC610MDL155XIC610MDL155YIC610MDL155Z
Common misspellings:
- 1C610MDL155
- IC6l0MDL155
- IC61oMDL155
- IC610MD1155
- IC610MDLl55
- IC610MDL155
GE 24Vdc Source Output (8 points) Series One Module PLC MDL155 IC610MDL1 IC610MDL15
Technical Information
The GE Fanuc IC610MDL155 output module is a source output module designed for controlling discrete loads through its 8 output circuits. The module outputs are rated for 24 Volts DC and 0.5 Amps of continuous current. A 3-Amps fuse is provided on the IC610MDL155 output module for protecting each of the 2 groups of output circuits. Field wiring connections are terminated on the screw terminals on a terminal block which installs on the faceplate of the IC610MDL155 output module. Either a single 12 AWG wire or two 14 AWG wires can be terminated on each terminal. The output operating state, either on or off, is indicated by a corresponding LED on the faceplate of the I/O module. All of the module outputs are referenced to the same user-provided power supply.
The weight of the IC610MDL155 output module is 120 grams. The maximum current consumption rating of the IC610MDL155 module is 30 milliamps at 9 Volts DC, which is supplied by the rack power supply. At 50 degrees Celsius, all the module outputs can be in the on state, but at 60 degrees Celsius, only 6 of the module outputs can be in the on state. The output current for any module output can go up to a maximum value of 0.5 Amps. The operating voltage range for the output circuits is 5 to 24 Volts DC and the maximum voltage which the module outputs can handle is 40 Volts DC. The on-state voltage drop varies from 1 Volt at 0.5 Amps to 0.75 Volts at 0.1 Amps. GE Fanuc recommends a minimum load of 1 milliamp for the output circuits on the IC610MDL155 module.
Common related search terms: BatteryBuy, Configuration, Datasheet, Dimension, Emerson, Fanuc, Firmware, GE, GE-Fanuc, Manual, PDF, PLC, Price, Repair, Specification, Troubleshoot, User-Manual, Wiring,
