GE / IP FANUC Series 90/30 In Stock
All product names, trademarks, brands and logos used on this site are the property of their respective owners. PDF Supply is not an authorized distributor, reseller or representative of the products featured on this website. The depiction, description or sale of products featuring these names, trademarks, brands and logos is for identification purposes only and is not intended to in indicate any affiliation with or authorization by any rights holder.
PDF Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with PDF Supply's 1-year, 2-year, or 3-year warranty.
Brand | GE Fanuc |
---|---|
Series | Network Adapters |
Part Number | EPXETC001 |
Product Type | EtherCat Adpater |
Ethernet Ports | 2 |
Mounting | DIN Rail |
Hot Swappable | No |
USB Port | Yes |
Weight | 227 grams |
Dimensions | 120 x 76 x 52 millimeters |
Humidity | 5 to 95% |
Operating Temperature | -4 to 140 degrees Fahrenheit |
Storage Temperature | -40 and 185 degrees Fahrenheit |
The GE Fanuc EPXETC001 module is an EtherCat adapter module. It has 2 Ethernet ports. The EPXETC001 module is certified by the Ethercat Technology Group.
The EPXETC001 adapter module is a GE Fanuc EtherCat network adapter module. It is designed for use with the GE RSTi-EP Slice I/O systems. The module is certified by the EtherCat Technology Group. This adapter module can be used as the head module for the system bus. It features an Ethernet switch and 2 Ethernet network ports. The main power supply for the station is integrated into the network adapter. The power is supplied through two 4-pole connectors which are separated into output and input current paths. The EPXETC001 adapter module does not support hot swapping. Before stating any maintenance activity, the module should be allowed to de-energize for at least 10 seconds after the system power is shut off. The module can be configured from an on-board Micro USB 2.0 interface.
The approximate weight of the GE Fanuc EPXETC001 network adapter module is 8 ounces or 227 grams. The dimensions of the module are as follows: 120 millimeters in height, 76 millimeters in depth, and 52 millimeters in width. The tolerable ambient humidity range for both operation and storage is 5 to 95% without condensation. The operating temperature range for the EPXETC001 adapter module is from -4 to 140 degrees Fahrenheit. In storage, the temperature of the air which surrounds the EPXETC001 adapter module should be between -40 and 185 degrees Fahrenheit. Diagnostic LEDs labeled “power,” “system fault,” “maintenance required,” “run,” “error,” “bus fault,” “LA in,” and “LA out” are available on the EPXETC001 module. The module input voltage range for the system and inputs is 20.4 to 28.8 Volts. The voltage range for the module outputs is 20.4 to 28.8 Volts. The recommended wire size for the use with the EPXETC001 adapter module is AWG 26 to 16.
PDF Supply sells used surplus products. PDF Supply is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by PDF Supply come with PDF Supply’s 1-year, 2-year, or 3-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. PDF Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because PDF Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, PDF Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. PDF Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. PDF Supply also makes no representations as to your right to install any such firmware on the product. PDF Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.