1-800-360-6802
[email protected]

GE / IP FANUC Series 90/30 In Stock

World's Largest Warehouse

of GE 90-30, Genius, and RX7i

1-800-360-6802

Mon-Fri 8AM-5PM EST

[email protected]

EP-125F

★ ★ ★ ★ ★ Rated 4.4/5 Based on 11 ratings.

Rate your purchase of the EP-125F

All product names, trademarks, brands and logos used on this site are the property of their respective owners. PDF Supply is not an authorized distributor, reseller or representative of the products featured on this website. The depiction, description or sale of products featuring these names, trademarks, brands and logos is for identification purposes only and is not intended to in indicate any affiliation with or authorization by any rights holder.

PDF Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with PDF Supply's 1-year, 2-year, or 3-year warranty.

Technical Specifications for EP-125F

BrandGE Fanuc
SeriesDigital Inputs
Part NumberEP-125F
Product TypeInput Module
Input Channels16
MountingDIN Rail
Sensor Connections1-wire
Off Range<5 Volts
On Range>11 Volts
Dimensions120 x 76 x 11.5 millimeters
Weight87 grams
Humidity5 to 95%
Operating Temperature-20 to 60 degrees Celsius

The GE Fanuc EP-125F module is a 16-channel digital input module. It supports 1-wire sensor connections. The weight of the EP-125F input module is 87 grams. 

The GE Fanuc EP-125F digital input module is a 16-channel input module. The inputs on the module support 1-wire sensor connections. The inputs are rated for 24 Volts DC positive logic. The process, diagnostic, and parameter data for the module depend on the network adapter that is used. The EP-125F input module is designed for use on the RSTi-EP system bus. The maximum bus transfer rate is 48 Mbps. The input delay on the EP-125F input module is set to 3 milliseconds. The off voltage range is less than 5 Volts and the on voltage range is greater than 11 Volts. A sensor power supply is not available on the module but reverse polarity protection is available. Individual channel diagnosis is not available on the module, but the EP-125F input module supports general module diagnostics.

 

The supply voltage range for the GE Fanuc EP-125F digital input module is 20.4 to 28.8 Volts. The module draws 8 milliamps from the system current path and 52 milliamps from the input current path. The operating and storage temperature ranges for the input module are -20 to +60 degrees Celsius and -40 to +85 degrees Celsius, respectively. The permitted non-condensing relative humidity range for the EP-125F input module is 5 to 95%. This humidity range is valid for module operation and for module storage. The shipping weight of the EP-125F input module is approximately 87 grams. The approximate module dimensions are 120 x 76 x 11.5 millimeters. To prevent explosions, the module should be powered off and completely discharged before it is replaced or wired in hazardous locations. Note that the substitution of module components may impair its suitability for Zone 2 type industrial applications.

ST. LOUIS, Feb. 1, 2019 – Emerson today announced it has completed the purchase of Intelligent Platforms from General Electric.

PDF Supply sells used surplus products. PDF Supply is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by PDF Supply come with PDF Supply’s 1-year, 2-year, or 3-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.

Rockwell Disclaimer: The product is used surplus. PDF Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because PDF Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, PDF Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. PDF Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. PDF Supply also makes no representations as to your right to install any such firmware on the product. PDF Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.