GE / IP FANUC Series 90/30 In Stock
EP-4264
All product names, trademarks, brands and logos used on this site are the property of their respective owners. PDF Supply is not an authorized distributor, reseller or representative of the products featured on this website. The depiction, description or sale of products featuring these names, trademarks, brands and logos is for identification purposes only and is not intended to in indicate any affiliation with or authorization by any rights holder.
PDF Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with PDF Supply's 1-year, 2-year, or 3-year warranty.
Technical Specifications for EP-4264
| Brand | GE Fanuc |
|---|---|
| Series | Analog Outputs |
| Part Number | EP-4264 |
| Description | Analog Output Module |
| Number of Outputs | 4 |
| Sensor Type | +/-10V, +/-5V, 0 to 10V, 0 to 5V, 2 to 10V, 1 to 5V, 0 to 20mA, or 4 to 20mA |
| Voltage Range | 20.4 to 28.8 Volts DC |
| Current Rating | 8 milliamps |
| Interface | RSTi-EP I/O Communication Bus |
| Short-Circuit Proof | Yes |
| Module Diagnosis | Yes |
| Reverse Polarity Protection | Yes |
| Average Weight | 98 Grams |
The GE EP-4264 Analog Output Module is a 4-channel analog output module designed to accept either voltage or current signal from up to 4 external analog actuators. This module offers 4 non-isolated analog outputs with 16-bits resolution per output. It is powered by an integrated power supply.
The GE Fanuc EP-4264 Analog Output Module is a 4-channel analog output module that is designed to accept either voltage or current signals from up to 4 external analog actuators. Each output point has a 16-bit resolution and they can all be connected to a connector. The EP-4264 Analog Output Module is capable of interfacing with the RSTi-EP I/O communication bus for process, parameters, and diagnostics data transfers. The EP-4264 Analog Output Module offers 4 non-isolated output channels, and each output channel supports the following output levels; 0 to 5 Volts, +/-5 Volts, 0 to 10 Volts, +/-10 Volts, 1 to 5 Volts, 2 to 10 Volts, 0 to 20 milliamps, or 4 to 20 milliamps. The EP-4264 Analog Output Module has a maximum response time of 1 millisecond per module and a maximum accuracy level of 0.1% FSR. It has a rated temperature coefficient of 20 ppm voltage/K or 31 ppm current measurement/K, and a maximum error range of +/-220 ppm FSR.
The GE Fanuc EP-4264 Analog Output Module has a repeat accuracy rating of less than 1 millivolt, and a maximum output ripple rating of 0.001%. The EP-4264 Analog Output Module has a maximum load resistance rating of greater than or equal to 1 kiloohm (at more than 50 degrees Celsius) in the voltage state and less than or equal to 600 Ohms in the current state. The EP-4264 Analog Output Module supports 2-wire (voltage and current) and 4-wire (voltage only) connections. When connected in a 2-wire configuration, the EP-4264 Analog Output Module supports automatic signal detection. The EP-4264 Analog Output Module offers a wide range of diagnostic and protective features such as short-circuit protection, module diagnosis, individual channel diagnosis, and substitute value features. The EP-4264 Analog Output Module draws power from the RSTi-EP system’s integrated power supply. It has an operating voltage range between 20.4 and 28.8 Volts DC, and a maximum current draw of 8 milliamps.
