GE / IP FANUC Series 90/30 In Stock
EP-3368
All product names, trademarks, brands and logos used on this site are the property of their respective owners. PDF Supply is not an authorized distributor, reseller or representative of the products featured on this website. The depiction, description or sale of products featuring these names, trademarks, brands and logos is for identification purposes only and is not intended to in indicate any affiliation with or authorization by any rights holder.
PDF Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with PDF Supply's 1-year, 2-year, or 3-year warranty.
Technical Specifications for EP-3368
| Brand | GE Fanuc |
|---|---|
| Series | Analog Inputs |
| Part Number | EP-3368 |
| Description | Analog Input Module |
| Interface | RSTi-EP I/O communication bus |
| System Bus Transfer Rate | 48 Mbps |
| Number of Inputs | 8 |
| Resolution | 16-bits |
| Accuracy | 0.1% Maximum |
| Conversion Time | 1 ms |
| Sensor Supply | 125 mA Maximum per Channel |
| Sensor Connection | 2-wire, 3-wire, 3-wire plus FE |
| Current Consumption | 8 mA (ISYS), 20 mA plus Load (IIN) |
| Supply Voltage | 20.4 to 28.8V |
The EP-3368 module is a 16-bit analog input module from GE used in combination with the PACSystems RSTi-EP I/O devices. It has 8 input channels, 16 bits of resolution, and an accuracy of 0.1% FSR. It requires an HD connector known as the EP-8360 connector to operate.
The EP-3368 module is a 16-bit analog input module for Programmable Logic Controllers (PLC) systems from GE. It is used in combination with the PACSystems RSTi-EP I/O system, which is a high density, high-performance remote I/O system that can support and power up to 64 active functions and I/O modules such as the EP-3368 input module. It features 8 input channels, 16 bits of resolution, and an accuracy of 0.1% FSR (Force Sensitive Resistor). It can detect up to 8 analog sensors with 0 to 20 milliamps or 4 to 20 milliamps current ratings. The sensors can be connected to each connector in 2, 3, or 4-wire arrangements. Each plug-in connector on the module includes an analog input, a GND (Ground) connector, a 24 Volts DC power supply, and a functional earth (FE) connector. The EP-3368 input module has a module LED and channel LEDs that are assigned to each channel for easy diagnosis and error detection. A red module status LED indicates a module system fault whereas a red channel status LED means there is a channel error.
The GE Fanuc EP-3368 analog input module requires a GE EP-8360 connector to function. This connector is a 4-signal high-density I/O connector that is made specifically for the EP-3368 input module, with a maximum of 1 Amp of current capacity and an insulation diameter of 1 to 1.6 millimeters. The connector should always be used in a pair with another identical connector for each slot of the connection frame. The module’s connection frame can accommodate up to 4 pairs of the EP-8360 connectors in total. The system bus feeds a voltage supply that is rated between 20.4 and 28.8 Volts to the module for operation. The network adapter feeds 8 milliamps of current to the module via the system current path (ISYS). The input current path (IIN) supplies the input module with 20 milliamps of current.
