1-800-360-6802
[email protected]

GE / IP FANUC Series 90/30 In Stock

World's Largest Warehouse

of GE 90-30, Genius, and RX7i

1-800-360-6802

Mon-Fri 8AM-5PM EST

[email protected]

EP-8360

★ ★ ★ ★ ★ Rated 4.6/5 Based on 7 ratings.

Rate your purchase of the EP-8360

All product names, trademarks, brands and logos used on this site are the property of their respective owners. PDF Supply is not an authorized distributor, reseller or representative of the products featured on this website. The depiction, description or sale of products featuring these names, trademarks, brands and logos is for identification purposes only and is not intended to in indicate any affiliation with or authorization by any rights holder.

PDF Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with PDF Supply's 1-year, 2-year, or 3-year warranty.

Technical Specifications for EP-8360

BrandGE Fanuc
SeriesAccessories
Part NumberEP-8360
Description HD Plug Kit
ApplicationGE RSTi-EP I/O System
Operating Voltage20.4 to 28.8 Volts DC
Current Rating1.0 Amp
Connector TypeSpring Style
Connector Poles4
Ingress Protection RatingIP 20
Number of Devices Per Package8
Operating Temperature -20 to 60 Degrees Celsius
Industry StandardscUL-us, CSA

The EP-8360 HD-Plug for GE RSTi-EP HD Modules is an accessory connection plug for the EP-3368 High-Density module. This HD plug kit has an operating voltage range of 20.4 to 28.8 Volt DC and a maximum current consumption rating of 1.0 Amps.

The GE Fanuc EP-8360 HD Plug for the GE RSTi-EP HD modules is an accessory connection plug for the GE Fanuc EP-3368 High-Density (HD) Module. The GE RSTTi-EP EP-3368 HD Module is not supplied with this HD plug unit, so it must be ordered separately from the GE Accessories catalog. The EP-8360 HD Plug is supplied in an accessory package consisting of 8 HD plugs. Each EP-3368 HD Module that uses these plugs has a connection frame that can support up to 4 EP-8360 HD connectors and an SAI cable (with a 0.14 to 0.35 mm2 cross-section) connected via an IDC (insulation displacement contact). The EP-8360 HD Plug supports this cable diameter with a maximum insulation diameter of 1 to 1.6 millimeters (0.04 to 0.06 inches). The EP-8360 HD Plug has a maximum current capacity of 1 Amps and it supports a 4-pole configuration.

 

When installing the EP-8360 HD Plug, a cross-section of the wire (22 to 26 AWG) and an outer wire (0.04 to 0.06 inches diameter) must be connected to the IDC (insulation displacement connector) using the following tools; a multi-stripax 6 by 16 wire stripping and cutting tool, and a pressing tool. It is also recommended that 2 HD connectors be connected into a single slot of the connector frame when using the EP-8360 High Density Plug. To install the plug, strip the insulation on all wires (approximately 20 millimeters) using the multi-stripax tool and insert all wires into the clamping unit of the connector. With the pressing tool, align all the wires properly within the HD connector and attach the wired connector into the EP-3368 Module’s connector frame. The EP-8360 HD Plug comes with an IP 20 ingress protection rating, and it has an operating temperature range between -20 and 60 degree Celsius.

ST. LOUIS, Feb. 1, 2019 – Emerson today announced it has completed the purchase of Intelligent Platforms from General Electric.

PDF Supply sells used surplus products. PDF Supply is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by PDF Supply come with PDF Supply’s 1-year, 2-year, or 3-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.

Rockwell Disclaimer: The product is used surplus. PDF Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because PDF Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, PDF Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. PDF Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. PDF Supply also makes no representations as to your right to install any such firmware on the product. PDF Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.