1-800-360-6802
[email protected]

GE / IP FANUC Series 90/30 In Stock

World's Largest Warehouse

of GE 90-30, Genius, and RX7i

1-800-360-6802

Mon-Fri 8AM-5PM EST

[email protected]

EP-8301

★ ★ ★ ★ ★ Rated 4.5/5 Based on 8 ratings.

Rate your purchase of the EP-8301

All product names, trademarks, brands and logos used on this site are the property of their respective owners. PDF Supply is not an authorized distributor, reseller or representative of the products featured on this website. The depiction, description or sale of products featuring these names, trademarks, brands and logos is for identification purposes only and is not intended to in indicate any affiliation with or authorization by any rights holder.

PDF Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with PDF Supply's 1-year, 2-year, or 3-year warranty.

Technical Specifications for EP-8301

BrandGE Fanuc
SeriesAccessories
Part NumberEP-8301
Product Description DIN Rail Termination Kit
Product Series RSTi-EP
Product Type Accessory
Number of End Brackets 2
Number of Cover Plates 1
Weight (approx.) 51 grams
CompatibilityStandard I/O Modules
Mounting DIN Rail

The EP-8301 DIN Rail Termination Kit is designed for I/O modules made by GE Fanuc. It weighs about 51 grams. This kit is an accessory that is used to secure the control station with 2 end brackets and a cover plate.

The EP-8301 DIN Rail Termination Kit belongs to the RSTi-EP family of accessories and replacement parts that are designed and manufactured by GE Fanuc. This kit contains 2 replacement end brackets and an endplate. It is used at the end of the RSTi station, where the endplate of the module protects the contact on the last module. The EP-8301 DIN Rail Termination Kit comes with state-of-the-art mechanical technology to secure the RSTi station on the DIN Rail. It can cover the end module to protect it against dust and small amounts of moisture. This termination kit is specifically designed with high-quality materials to ensure durability and maximum service life. The EP-8301 DIN Rail Termination Kit is supplied with all the required accessories and parts for the installation process.      

 

The GE Fanuc EP-8301 DIN Rail Termination Kit is used as a protection replacement part in the RSTi station. It is supplied with RSTi-EP network adapters and it helps to connect the station firmly to the DIN Rail by using the 2 end brackets of the module. The 2 end brackets are used to secure the installation position of the RSTi station. The second end bracket for the kit is screwed to the DIN Rail. This terminal kit must be moved at least 5 centimeters away from the station before removing a module from the station. The approximate weight of the EP-8301 DIN Rail Termination Kit is 51 grams. This kit is commonly used for horizontal station installation. It is advised to use special module end brackets if this kit is installed below the station for a vertical installation. The EP-8301 DIN Rail Termination Kit secures the station in place by protecting its contacts via its replacement end brackets and endplates.

ST. LOUIS, Feb. 1, 2019 – Emerson today announced it has completed the purchase of Intelligent Platforms from General Electric.

PDF Supply sells used surplus products. PDF Supply is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by PDF Supply come with PDF Supply’s 1-year, 2-year, or 3-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.

Rockwell Disclaimer: The product is used surplus. PDF Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because PDF Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, PDF Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. PDF Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. PDF Supply also makes no representations as to your right to install any such firmware on the product. PDF Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.