GE / IP FANUC Series 90/30 In Stock
Allen Bradley | SMC-Flex
PDF Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with PDF Supply's 1-year, 2-year, or 3-year warranty.
| 150-F201NBR | The Allen-Bradley 150-F201NBR Smart Motor Controller is a powerful tool for regulating and safeguarding electric motors in a variety of settings. It has a powerful 201 Amp continuous output and can power motors with up to 150 HP at 460 VAC thanks to its wide voltage range of 200-460 VAC. This controller may be used in a wide range of industrial settings thanks to its flexible start/stop modes, metering choices, and communication channels. | Buy Now |
| 150-F317NBD | The Allen-Bradley 150-F317NBD is a Soft-Starter, or SMC Flex Smart Motor controller, with flexible functionality. It controls 3-phase motors well for a range of commercial uses. This semiconductor appliance has an energy-saving start-up and shut-down sequence. It's compatible with a variety of control strategies, including: Soft Start, Full Voltage Start, Smart Motor Braking, Current Limit Start, Dual Ramp Start, and more. Features an open-type housing, backlit LCD display, and user-friendly interface for accurate motor control; perfect for compressors, pumps, conveyors, and crushers. | Buy Now |
| 150-F361NBD | The Allen-Bradley 150-F361NBD smart motor controller belongs to the SMC Flex series. This component is a solid-state controller with a maximum output power rating of 300 Horsepower at 460 Volts AC rated voltage with a line-connected motor and a maximum output power rating of 500 Horsepower at 460 Volts AC rated voltage with a Delta-connected motor. The 150-F361NBD smart motor controller’s control voltage is 100 to 240 Volts AC at 50/60 Hertz. | Buy Now |
| 150-F480NBD | The 150-F480NBD Smart Motor Controller from Allen-Bradley is a versatile solid-state device designed for precise control of AC motors. With various operational modes, it efficiently manages motor starting, stopping, and idle states, enhancing operational efficiency while protecting motors from improper operation. Operating with a supply voltage range of 200-460V AC, it offers a maximum output current of 480 Amperes and an output power of 400 HP at 460VAC. This controller also supports accessory devices and communication modules for seamless integration into industrial applications. | Buy Now |
| 150-F60NBDD | The Allen Bradley 150-F60NBDD Smart Motor Controller is a powerful solution for motor control applications, with a current rating of 60 A and compatibility with motors ranging from 10 to 40 HP at 460 Volts AC, this controller offers precise control and protection. It features an intuitive display, making it easy to monitor and configure. Plus, with advanced features like braking control and overload protection, it ensures the efficient and safe operation of your motors. | Buy Now |
| 150-F85NBD | The 150-F85NBD from Allen Bradley is an SMC-Flex smart motor controller. This is a solid-state controller with an input line voltage requirement of 200-460 volts AC (3-phase) at 50/60 hertz, a control voltage of 100 to 240 volts AC (5 to 480 amperes), a rated current output of 85 amperes, and a rated power of 60 horsepower at 460 volts AC. The 150-F85NBD protects motors from stress caused by high current and voltage levels, as well as from random starting and stopping. | Buy Now |
| 150-FPP480B | The Allen-Bradley 150-FPP480B power pole is a power pole for SMC-Flex motor controllers that are compatible with 3-phase induction motors. This power pole is part of the SMC Flex series and is a controller accessory. The 150-FPP480B power pole is a 1-phase power pole. It comes in a kit with a bypass contactor and SCRs. The 150-FPP480B power pole can support a line voltage rating of 200 to 480V and a controller current rating of 480 Amps. | Buy Now |
| 41391-454-01-B1FX | The Allen-Bradley 41391-454-01-B1FX control module is a flexible controller from the SMC-Flex series that is intended for precise pump control applications. It supports a control input voltage range of 100 to 240 Volts AC and line voltages of 200 to 600 Volts AC. This microprocessor-based control module reduces the risk of common fluid system hazards, including surges and valve slamming. The 41391-454-01-B1FX control module also optimizes pump efficiency and supports customized motor start curves. | Buy Now |
PDF Supply sells used surplus products. PDF Supply is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by PDF Supply come with PDF Supply’s 1-year, 2-year, or 3-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. PDF Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because PDF Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, PDF Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. PDF Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. PDF Supply also makes no representations as to your right to install any such firmware on the product. PDF Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.