1-800-360-6802
[email protected]

GE / IP FANUC Series 90/30 In Stock

A Global Supplier of Industrial Electronics

1-800-360-6802

Mon-Fri 8AM-5PM EST

[email protected]

150-C251NBD

★★★★★Rated 0/5 Based on 0 ratings.

Rate your purchase of the 150-C251NBD

SMC-3 Series Image

SMC-3 Series Image

Rockwell Disclaimer: The product is used surplus. PDF Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because PDF Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, PDF Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. PDF Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. PDF Supply also makes no representations as to your right to install any such firmware on the product. PDF Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

PDF Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with PDF Supply's 1-year, 2-year, or 3-year warranty.

Refurbished

$3439

2 In Stock

1 Yr PDF Supply warranty

What is Refurbished?

Ships .

The Allen-Bradley 150-C251NBD is a multipurpose SMC-3 smart motor controller, often known as a soft starter, created to improve the performance of 3-phase motors by offering motor protection and lowering energy usage. This clever device is a crucial part of effective and trustworthy motor control because it comes with built-in safety features like overload protection and bypass as well as sophisticated motor diagnostics. With incorporated DIP and rotary switches, the 150-C251NBD facilitates configuration and ensures user friendliness. With features like Soft Start, Current Limit Start, Selectable Kickstart, Coast-to-Rest, and Soft Stop, it can enhance operational effectiveness while lowering safety concerns. This controller produces an appropriate motor output of 251 Amperes while operating within a 200-460 Volt AC, 3-Phase, 50/60 Hertz frequency range, with a control voltage rating of 100-240 Volts AC. Starting timings, initial torque, current limits, kick-start duration, soft stops, and overload trip class can all be precisely customized to match individual motor control needs. This controller works well in temperatures ranging from -5 to +50°C (23 to 122°F) and altitudes up to 2000 meters (6560 feet), dissipating 147 Watts of electricity and operating within an overload current range of 84 to 251 Amperes. It is a strong and dependable option for motor control applications in diverse industrial settings since it can endure operational shock levels of 15 G and vibration up to 1.0 G Peak with a 0.15-millimeter (0.006-inch) displacement. Because it ensures accurate and effective motor control, the Allen-Bradley 150-C251NBD Smart Motor Controller from the SMC-3 series is a crucial part of industrial automation systems.

Technical Specifications for 150-C251NBD

ManufacturerAllen Bradley Drives
Product ID150-C251NBD
Product TypeSmart motor controller
Selectable Current Limit150%, 250%, 350%, and 450% of full load current
Selectable Initial Torque15%, 25%, 35%, and 65% of locked rotor torque
Selectable Start Times2, 5, 10, 15, 20, 25, or 30 seconds
MountingPanel Mount
Supported functionsSelectable kickstart; Current limit start; Cost-to-rest and Soft Stop; Soft Start
Output Current0-251 Amperes
Input frequency50 / 60 Hertz
Input Line Voltage200-460 Volts AC
Control Voltage100-240 Volts of AC
Product LineSMC-3
Current Rating251 Amperes
Rated Voltage200-460 VAC

PDF Supply sells used surplus products. PDF Supply is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by PDF Supply come with PDF Supply’s 1-year, 2-year, or 3-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.

Rockwell Disclaimer: The product is used surplus. PDF Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because PDF Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, PDF Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. PDF Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. PDF Supply also makes no representations as to your right to install any such firmware on the product. PDF Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.