GE / IP FANUC Series 90/30 In Stock

A Global Supplier of Industrial Electronics

Mon-Fri 8AM-5PM EST

150-C19NBD

Rated 0/5 Based on 0 ratings.

Rate your purchase of the 150-C19NBD

SMC-3 Series Image

SMC-3 Series Image

Rockwell Disclaimer: The product is used surplus. PDF Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because PDF Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, PDF Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. PDF Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. PDF Supply also makes no representations as to your right to install any such firmware on the product. PDF Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

PDF Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with PDF Supply's 1-year, 2-year, or 3-year warranty.

Allen Bradley manufactured the 150-C19NBD smart motor controller is part of the SMC-3 series, and this device is commonly referred to as a motor soft starter. It is primarily used to provide protected motor start-up and shutdown as well as to implement energy savings. This soft starting device has a 19-ampere rating, a 200-460V AC input voltage, a 3-phase line voltage, a line input frequency of 50/60 hertz, and a control voltage of 100 - 240 VAC. This controller has an open type enclosure and typical control methods, including soft start, current limit start, selectable kickstart, coast-to-rest, and soft stop. This solid-state controller has a selectable overload trip class of 10, 15, or 20, and a dielectric withstands of 22000 volts AC for UL/CSA/NEMA installation and a DV/DT protection of 1000V/s, and a DV/DT protection of 1000V/s. This gadget is only for use with three-phase motors. The SMC-3 alignment solid-state smart motor controller has an open-type enclosure. This controller is line and delta-compatible and is utilized for a variety of applications such as chillers, fans, pumps, conveyors, compressors, lifts, mixers, and so on. This unit includes an LED status indication that indicates RUN, OFF, and fault conditions, with the sort of fault indicated by the number of flashes the LED indicator produces. This controller also has a reset button that also serves as a hold-to-test button to check for defects. The 150-C19NBD controller also features built-in protection, including electronic motor overload protection, phase loss/open load protection, phase reversal protection, phase imbalance, over-temperature protection, and shorted SCR.

Technical Specifications for 150-C19NBD

ManufacturerAllen-Bradley
SeriesSMC-3
Product TypeSmart Motor Controller
Current Rating19 amps
Rated Voltage200-460V AC
Control MethodsSoft Start, Current Limit Start, Selectable Kickstart, Coast-to-rest and Soft Stop control methods
Input Line200-460V AC, 3-Phase, 50/60 hertz
Control Voltage100-240 VAC
Wiring3-Wire
CompatibilityDelta Compatibility
MountingPanel Mount
Enclosure ratingOpen type

PDF Supply sells used surplus products. PDF Supply is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by PDF Supply come with PDF Supply’s 1-year, 2-year, or 3-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.

Rockwell Disclaimer: The product is used surplus. PDF Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because PDF Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, PDF Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. PDF Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. PDF Supply also makes no representations as to your right to install any such firmware on the product. PDF Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.