GE / IP FANUC Series 90/30 In Stock
Home » Allen Bradley » SLC-500 » You are here: 1747-UIC
1747-UIC
Rockwell Disclaimer: The product is used surplus. PDF Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because PDF Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, PDF Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. PDF Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. PDF Supply also makes no representations as to your right to install any such firmware on the product. PDF Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
PDF Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with PDF Supply's 1-year, 2-year, or 3-year warranty.
Other Available Revisions for the 1747-UIC 1747-UIC//A
Common misspellings:
- l747-UIC
- 17A7-UIC
- 1747-U1C
- 1747-UlC
- 1747UIC
The Allen-Bradley 1747-UIC is from the SLC 500 group of processors. The 1747-UIC is a Universal Serial Bus (USB) interface converter. It increases the connectivity options of the DH-485 to SLC-500 and MicroLogix controllers. The 1747-UIC enhances the connection of SLC-500, MicroLogix, ControlLogix controllers, PanelView terminals, 1747-AIC and 1761-NET-AIC isolators through the DH-485 port using a computer USB port. With the 1747-UIC, there is no need for the PIC/AIC+ DH-485 driver to be installed in RSLinx as it has the DH-485 embedded.
The 1747-UIC comes with one RJ-45 connector for connecting the SLC-500, 5/01, 5/02, 5/03, AIC, and PanelView products with the DH-485 port. It uses the standard DF1 communication channel to interface with RSLinx through the COMMON port to USB redirector. The 1747-UIC uses the RS-232 DB9 to connect to channel 0 on SLC 5/03, AIC+, MicroLogix, CompactLogix, FlexLogic, ControlLogix and PanelView products with RS-232 ports. The 1747-UIC is powered through the computer USB with no need of an external power supply. The USB cable is 12 inches. Additionally, three LED lights on the 1747-UIC show the communication status.
Only one 1747-UIC should be connected to the computer at any given time. When using the USB cable to connect the 1747-UIC, make sure you suppress the electromagnetic emission and interference by using a ferrite collar. The collar must be placed between the cable ties on the USB cable where the cable exits. To avoid electrostatic damage on the 1747-UIC interface converter, make sure you connect it to a grounded DH-485 device before plugging the USB cable into the computer’s USB port.
