GE / IP FANUC Series 90/30 In Stock
Home » Allen Bradley » SLC-500 » You are here: 1747-L40L
1747-L40L
Rockwell Disclaimer: The product is used surplus. PDF Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because PDF Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, PDF Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. PDF Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. PDF Supply also makes no representations as to your right to install any such firmware on the product. PDF Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
PDF Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with PDF Supply's 1-year, 2-year, or 3-year warranty.
Other Available Revisions for the 1747-L40L 1747-L40L//A1747-L40L//B
Common misspellings:
- l747-L40L
- 17A7-L40L
- 1747-140L
- 1747-LA0L
- 1747-L4oL
- 1747-L401
- 1747L40L
Technical Specifications for 1747-L40L
| Brand | Allen-Bradley / Rockwell Automation |
|---|---|
| Series | SLC-500 |
| Part Number | 1747-L40L |
| Description | SLC 500 Controller |
| Voltage | 120/240 Volts AC |
| Input | 24 DC Inputs |
| Output | 16 Sink Outputs |
| Memory | 1K words |
| Frequency | 50/60 Hertz |
| Scan Hold-Up Time | 20-700 milliseconds |
| Temperature | 0-60 degrees Celsius |
| Standard | CSA, UL Standards |
About 1747-L40L
The 1747-L40L controller is an Allen-Bradley SLC 500 controller. It has a voltage rating of 120/240 Volts AC. It comes with 24 DC source inputs and 16 DC sink outputs. The controller has an 1 K word memory to store program instructions. The memory of the controller has a typical scan time of 8 milliseconds for 1 K words. The bit execution time is set at 4 microseconds. The program of the controller is able to hold instructions during power losses. The scan holdup time ranges between 20 and 700 milliseconds depending on the loading time. The operating frequency of the module is 50/60 Hertz. The 1747-L40L controller uses a Belden 9463 cable for connection wiring. This industrial unit comes with an open enclosure and should be operated in indoor locations only. The operating temperature should be set between 0 and 60 degrees Celsius. It is able to withstand vibrations and an acceleration of 2.5G and 57 to 2000 Hertz.
The Allen-Bradley 1747-L40L SLC 500 controller is equipped with both program memory and RAM. The program memory is able to hold 1 K of instructions. The 1747-L40L controller uses EEPROM and UVPROM as the RAM to store operating instructions. Note that the instructions stored on the RAM are lost when the power is turned off unless the RAM is backed up. An optional battery with a lifetime of 5 years can be used as a backup method to prevent the loss of the instructions. An optional 2-slot expansion port is available in the controller for further expansion. Enough clearance should be left for air flow around the controller during the installation. The 1747-L40L controller is certified with the CSA and UL standards.
The 1747-L40L controller is an Allen-Bradley controller unit. It can save 1K word of data in its memory.
F.A.Q for 1747-L40L
