GE / IP FANUC Series 90/30 In Stock
Home » Allen Bradley » SLC-500 » You are here: 1747-ACNR15
1747-ACNR15
Rockwell Disclaimer: The product is used surplus. PDF Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because PDF Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, PDF Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. PDF Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. PDF Supply also makes no representations as to your right to install any such firmware on the product. PDF Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
PDF Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with PDF Supply's 1-year, 2-year, or 3-year warranty.
Other Available Revisions for the 1747-ACNR15 1747-ACNR15//A
Common misspellings:
- l747-ACNR15
- 17A7-ACNR15
- 1747-ACNRl5
- 1747ACNR15
The Allen-Bradley 1747-ACNR15 SLC 500 is part of the Allen-Bradley SLC series and the 1747-ACNR15 SLC 500 is an adapter I/O module. The 1747-ACNR15 has certification from the CSA. The 1747-ACNR15 compiles with numerous standards like the EN50081-2 class A, the NEMA standard ICS 2-230, the IEC1000-4-3 standard and the IEC1000-4-2 standards. The 1747-ACNR15 SLC 500 uses 2 ControlNet ports to facilitate remote communication. By use of 1 of its 4 taps, the Allen-Bradley 1747-ACNR15 can be connected to the controlNet network. The 1747-ACNR15 is fitted with an indicator for the ControlNet status and the module net address switches. The 1747-ACNR15 has a redundant media feature.
The 1747-ACNR15 SLC 500 uses a backplane current rating of 900 MA at 5V DC. The 1747-ACNR15 comes with diagnostic messages and a high-speed transfer feature. A range of 32 – 140 degrees Fahrenheit is the temperature range needed for the 1747-ACNR15 to operate efficiently and it should be stored in a place that has a temperature range of -40-185 degrees Fahrenheit. The environmental conditions for the Allen-Bradley 1747-ACNR15 SLC 500 must be between 5 and 95% non-condensing relative humidity. Through the NAP (Network Access Port) the 1747-ACNR15 connects with other networks because it has access to the local communication network. The1786-CP cable is used to connect the programming terminals of the 1747-ACNR15 to the network.
The Allen-Bradley 1747-ACNR15 uses the Quad-Shield RG-6 Coaxial cable as its cable. The 1747-ACN15 SLC 500 dimensions are 5.5 x 3.6 x 5.7 inches. The 1747-ACNR15 has an average weight of 2.5 pounds or 1.1 Kilograms.
