GE / IP FANUC Series 90/30 In Stock
Home » Allen Bradley » SLC-500 » You are here: 1746-RT32
1746-RT32
Rockwell Disclaimer: The product is used surplus. PDF Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because PDF Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, PDF Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. PDF Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. PDF Supply also makes no representations as to your right to install any such firmware on the product. PDF Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
PDF Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with PDF Supply's 1-year, 2-year, or 3-year warranty.
Other Available Revisions for the 1746-RT32 1746-RT32//A
Common misspellings:
- l746-RT32
- 17A6-RT32
- 1746RT32
The Allen Bradley 1746-RT32 is a Removable Terminal Block in the SLC 500 series. The 1746-RT32 module draws a backplane current of 215 milliamperes at 5 Volts and has an update time of 2 millimeters. It has 4 Input/Output points and 18 terminals, all of which are plated in gold to reduce resistance while also increasing the module’s durability.
The 1746-RT32 module has a humidity rating of between 5% and 95% in a non-condensing space. It can be mounted on an 1746 chassis, and weighs 2.5 pounds with measurements of 5.5 x 3.6 x 5.7 inches. Its lightweight and compact size helps transport the module easily. It has an operating temperature of 0 to 60 degrees Celsius, with -40 to 85 degrees Celsius as its ideal storage temperature.
The 1746-RT32 must be used only with the 1746-NT8 thermocouple/mV module. It has Cold Junction Compensation (CJC) sensors that ensure a flawless operation of the thermocouple module. It also has one release screw on each end to help hold it firmly in place when it’s being mounted. It can accommodate the 1746-RT26 and 1746-RT26 units as I/O connections and it is CUL, CSA and CE certified.
When fastening the 1746-RT32 module to its chassis the CJC sensors should be left untouched. This sensor provides reliable readings of the thermocouple input on each channel. A red lug should always be fixed on the positive terminal of the CJC. When wiring the 1746-RT32, ensure that the unshielded parts of the trimmed wire are minimal.
