GE / IP FANUC Series 90/30 In Stock
Home » Allen Bradley » SLC-500 » You are here: 1746-RT25R
1746-RT25R
Rockwell Disclaimer: The product is used surplus. PDF Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because PDF Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, PDF Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. PDF Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. PDF Supply also makes no representations as to your right to install any such firmware on the product. PDF Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
PDF Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with PDF Supply's 1-year, 2-year, or 3-year warranty.
Other Available Revisions for the 1746-RT25R 1746-RT25R//A
Common misspellings:
- l746-RT25R
- 17A6-RT25R
- 1746RT25R
The 1746-RT25R by Allen-Bradley is a 1746 SLC 500 series general purpose removable terminal block. It has protective gold-plated contacts, it is color coded red, and it works with AC input/output modules. It has a up to 16 input/output points and 18 terminals. This removable terminal block can connect with 1746 I/O modules such as the -IA16, -IM16, -OA16, and the -OAP12. Module circuitry is susceptible to damage if the incorrect terminal block is installed; as such, ensure that the red band, which indicates compatibility, is present on all modules that are to be connected to the 1746-RT25R block.
The 1746-RT25R allows users to replace input/output modules without the need for rewiring. Self-lifting pressure plates ensure that wiring is secure and the barriers present on 3 sides of the terminal aid in preventing accidental shorting out of wiring. To avoid possible damage to equipment and personal injury only remove or install the 1746-RT25R terminal block when the SLC 500 system is switched OFF. The 1746-RT25R remains operational at up to temperatures of 60 degrees Celsius and at a minimum temperature of 0 degrees Celsius. It is 1.1 kilograms (2.5 pounds) in weight. The 1746-RT25R is often installed in a 1746 chassis, where it occupies 1 slot.
When installing the 1746-RT25R, ensure that the release screws are in line with the matching connectors on the module. The terminal block should then be firmly pressed onto the connector’s contacts and the release screws should be tightened. Alternate the screws during tightening to avoid cracking the 1746-RT25R terminal block.
