GE / IP FANUC Series 90/30 In Stock
Home » Allen Bradley » SLC-500 » You are here: 1746-RT25C
1746-RT25C
Rockwell Disclaimer: The product is used surplus. PDF Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because PDF Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, PDF Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. PDF Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. PDF Supply also makes no representations as to your right to install any such firmware on the product. PDF Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
PDF Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with PDF Supply's 1-year, 2-year, or 3-year warranty.
Other Available Revisions for the 1746-RT25C 1746-RT25C//A
Common misspellings:
- l746-RT25C
- 17A6-RT25C
- 1746RT25C
The Allen-Bradley 1746-RT25C removable terminal block is an SLC 500 series general purpose RTB. It is orange in color, it has gold-plated contacts, and it works with relay output modules. It has 16 input/output points and a maximum of 18 terminals. This terminal block is compatible with modules in the Allen-Bradley 1746 series which includes the OX8 and the OW16 modules. Be sure to check the module for the orange color band, because the module’s circuitry can be damaged if the wired terminal block that is installed is not compatible.
Rewiring is not necessary when working with the 1746-RT25C RTB. Its self-lifting pressure plates facilitate secure wiring and its barriers on the 3 sides aid in protecting it from short circuits that may occur in the wiring. Do not remove the 1746-RT25C terminal block or install it if the SLC 500 system is powered on; otherwise, this may result in damage to the equipment and possible personal injury.
Installing the Allen-Bradley 1746-RT25C RTB is as easy as aligning the release screws with the matching connector on the module. When they are aligned, press the terminal block onto the connector’s contacts firmly. Then, tighten each of the release screws. To prevent the terminal block from cracking, alternate between screws when tightening them. The 1746-RT25C can function at a temperature range between 0 degrees Celsius and 80 degrees Celsius. It is also unaffected if installed in environments with up to 300V of electricity. It weighs 2.5 pounds (1.1 kilograms) and measures 3.6 by 5.5 by 5.7 inches in size.
