GE / IP FANUC Series 90/30 In Stock
Home » Allen Bradley » SLC-500 » You are here: 1746-QV
1746-QV
Rockwell Disclaimer: The product is used surplus. PDF Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because PDF Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, PDF Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. PDF Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. PDF Supply also makes no representations as to your right to install any such firmware on the product. PDF Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
PDF Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with PDF Supply's 1-year, 2-year, or 3-year warranty.
Other Available Revisions for the 1746-QV 1746-QV//A
Common misspellings:
- l746-QV
- 17A6-QV
- 1746QV
The Allen-Bradley 1746-QV is a Velocity Control Module of the SLC 500 series. This module controls the speed and placement of a hydraulic ram. The 1746-QV can accept an input from a linear displacement transducer (LDT). Compatible LDT input devices include Balluff BTL-2-L2 or -M2, Gemco Quick-Stick II, Temposonics II with DPM or RPM, and Santest GYRP or GYRG. The outputs vary between -10V dc and 10V dc. The velocity control module receives information from the SLC processor instructing when and how much to the hydraulic motion should accelerate or decelerate. The benefits of the 1746-QV include reduced cycle time, energy savings, smoother operations and faster change-over of new parts by storing setups to minimize re-adjustments. Users can also program accelerations and decelerations of the hydraulic ram to result in less damaging operation on the machine.
Users have the ability to program up to seven different voltages for both the extend and retract profiles which determine how much the ram accelerates/decelerates. Some of the applications for the 1746-QV include but are not limited to hydraulic machinery, welder placement, and diecasting machinery. Additionally, the 1746-QV can support standard proportional amplifiers and be used in most existing hydraulic systems. The module features LED indicators to determine if the system is running or faulty. The 1746-QV backplane power requirements are 215 mA at 5V dc and 400 mA at 15V dc. Operating temperatures for the 1746-QV range between 0-60 degrees Celsius (32-140 degrees Fahrenheit) and storage temperatures should be between -40-85 degrees Celsius (-40-185 degrees Fahrenheit) at 5-95% relative humidity without condensation.
